High-flux, high-temperature thermal vacuum qualification testing of a solar receiver aperture shield
- NASA Lewis Research Center, Cleveland, OH (United States)
- AlliedSignal Aerospace Equipment Systems, Torrance, CA (United States)
As part of the International Space Station (ISS) Phase 1 program, NASA Lewis Research Center (LeRC) and the Russian Space Agency (RSA) teamed together to design, build and flight test the world`s first orbital Solar Dynamic Power System (SDPS) on the Russian space station Mir. The Solar Dynamic Flight Demonstration (SDFD) program was to operate a nominal 2 kWe SDPS on Mir for a period up to 1-year starting in late 1997. Unfortunately, the SDFD mission was demanifested from the ISS Phase 1 shuttle program in early 1996. However, substantial flight hardware and prototypical flight hardware was built including a heat receiver and aperture shield. The aperture shield comprises the front face of the cylindrical cavity heat receiver and is located at the focal plane of the solar concentrator. It is constructed of a stainless steel plate with a 1-m outside diameter, a 0.24-m inside diameter and covered with high-temperature, refractory metal multi-foil insulation (MFI). The aperture shield must minimize heat loss from the receiver cavity, provide a stiff, high strength structure to accommodate shuttle launch loads and protect receiver structures from highly concentrated solar fluxes during concentrator off-pointing events. To satisfy Mir operational safety protocols, the aperture shield was required to accommodate direct impingement of the intensely concentrated solar image for a 1-hour period. To verify thermal-structural durability under the anticipated high-flux, high-temperature loading, an aperture shield test article was constructed and underwent a series of two tests in a large thermal vacuum chamber configured with a reflective, point-focus solar concentrator and a solar simulator. The test article was positioned near the focal plane and exposed to concentrated solar flux for a period of 1-hour. In the first test, a near equilibrium temperature of 1862 K was attained in the center of the shield hot spot. In the second test, with increased incident flux, a near equilibrium temperature of 2072 K was achieved. The aperture shield sustained no visible damage as a result of the exposures. This paper describes the aperture shield thermal-vacuum qualification test program including the test article, test facility, procedures, data collection, test success criteria, results and conclusions.
- OSTI ID:
- 347766
- Report Number(s):
- CONF-970701-; TRN: IM9923%%304
- Resource Relation:
- Conference: 32. intersociety energy conversion engineering conference, Honolulu, HI (United States), 27 Jul - 2 Aug 1997; Other Information: PBD: [1997]; Related Information: Is Part Of Proceedings of the thirty-second intersociety energy conversion engineering conference. Volume 1: Aerospace power systems and technologies; PB: 787 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Thermal cycling of Mir Cooperative Solar Array (MCSA) test panels
On-orbit performance prediction of the heat receiver for the U.S./Russia solar dynamic power flight experiment