Advanced binary cycles: Optimum working fluids

Conference · Wed Dec 31 04:00:00 EST 1997

OSTI ID:347589

Gawlik, K; Hassani, V ^[1]

---

1. National Renewable Energy Lab., Golden, CO (United States)

A computer model (Cycle Analysis Simulation Tool, CAST) and a methodology have been developed to perform value analysis for small, low- to moderate-temperature binary geothermal power plants. The value analysis method allows for incremental changes in the levelized electricity cost (LEC) to be determined between a baseline plant and a modified plant. Thermodynamic cycle analyses and component sizing are carried out in the model followed by economic analysis which provides LEC results. The emphasis of the present work is on evaluating the effect of mixed working fluids instead of pure fluids on the LEC of a geothermal binary plant that uses a simple Organic Rankine Cycle. Four resources were studied spanning the range of 265 F to 375 F. A variety of isobutane and propane based mixtures, in addition to pure fluids, were used as working fluids. This study shows that the use of propane mixtures at a 265 F resource can reduce the LEC by 24% when compared to a base case value that utilizes commercial isobutane as its working fluid. The cost savings drop to 6% for a 375 F resource, where an isobutane mixture is favored. Supercritical cycles were found to have the lowest cost at all resources.

• OSTI ID: 347589
• Report Number(s): CONF-970701--
• Country of Publication: United States
• Language: English

Related Subjects

15 GEOTHERMAL ENERGY
BUTANE
C CODES
COMPUTERIZED SIMULATION
GEOTHERMAL POWER PLANTS
PRICES
PROPANE
RANKINE CYCLE POWER SYSTEMS
THERMODYNAMIC CYCLES
WORKING FLUIDS