Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Theoretical analysis and experiment on combined close-contact and natural convection melting in thermal energy storage spherical capsule

Conference ·
OSTI ID:347575
 [1];  [2];  [3]
  1. Tohoku Univ., Sendai (Japan). Dept. of Aeronautics and Space Engineering
  2. Keihin Co., Ltd., Kakuda (Japan)
  3. Tohoku Electric Power Co., Ltd., Sendai (Japan)

Melting and freezing of a phase change material (PCM) in a spherical capsule is of practical importance in heat storage systems which are considered very promising to reduce peak electricity demand in the summer season. Heat transfer with melting and freezing of PCM in a capsule is quite complicated because of two heat transfer modes occurring within a capsule, i.e. one is close-contact melting mode between PCM and capsule material, and another is natural convection heat transfer in melt pool under or above the solid PCM. Owing to this complicated nature, there has been reported no detailed analysis up to date. In comparison with the cylindrical capsule type unit, the spherical capsule unit has a great advantage from the viewpoint of the thermal performance and care of installation. In this article, the authors present a mathematical formulation and the numerical results on the transient melting (charging) heat transfer in a spherical heat storage capsule under inner wall temperature distribution. In recent years, efforts have been devoted to clarify the mechanism of close-contact heat transfer for a single enclosure with various shapes. However, there is no theoretically exact numerical simulation considering both close-contact and natural convection melting processes within a spherical capsule. Three years ago, the worlds largest district heating and cooling (DHC) system was opened in Yokohama, near Tokyo, in which about six million spherical ice balls (diameter: 80 mm) were installed in two vertical storage tanks with a height of 28 meters. The results of the present analysis can be effectively applicable to the practical plant for a thermal design.

OSTI ID:
347575
Report Number(s):
CONF-970701--
Country of Publication:
United States
Language:
English