skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Performance of the beam position monitor system for the SLAC PEP-II {ital B} factory

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.57051· OSTI ID:344470
; ;  [1]
  1. Stanford Linear Accelerator Center P.O. Box 4349, Stanford, California 94309 (United States)

The beam position monitor (BPM) system for the SLAC PEP-II {ital B} Factory was designed to measure the positions of single-bunch single-turn to multibunch multi-turn beams in both rings of the facility. Each BPM is based on four button-style pickups. At most locations the buttons are connected to provide single-axis information ({ital x} only or {ital y} only). Operating at a harmonic (952 MHz) of the bunch spacing, the BPM system combines broadband and narrowband capabilities and provides data at a high rate. The active electronics system is multiplexed for signals from the high-energy ring (HER) and low-energy ring (LER). The system will be briefly described; however, the main purpose of the present paper is to present operational results. The BPM system operated successfully during commissioning of the HER (primarily) and the LER over the past year. Results to be presented include on-line calibration, single-bunch single-turn resolution ({lt}100 {mu}m), and multibunch multi-turn resolution ({lt}3 {mu}m), multiplexing, and absolute calibration. Thus far, the system has met or exceeded all the requirements that have been tested. The remaining requirements will be tested when both rings are completed and commissioned this summer. In addition, typical results of beam physics studies relying on the BPM system will be presented. {copyright} {ital 1998 American Institute of Physics.}

Research Organization:
SLAC National Accelerator Lab., Menlo Park, CA (United States)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC03-76SF00515
OSTI ID:
344470
Report Number(s):
CONF-980573-; ISSN 0094-243X; TRN: 99:005667
Journal Information:
AIP Conference Proceedings, Vol. 451, Issue 1; Conference: 8. beam instrumentation workshop (BIW-98), Stanford, CA (United States), 4-7 May 1998; Other Information: PBD: Dec 1998
Country of Publication:
United States
Language:
English

Similar Records

Performance of the beam position monitor system for the SLAC PEP-II B factory
Journal Article · Thu Dec 10 00:00:00 EST 1998 · AIP Conference Proceedings · OSTI ID:344470

Beam position monitor system for PEP-II
Journal Article · Wed Jan 01 00:00:00 EST 1997 · AIP Conference Proceedings · OSTI ID:344470

Recording PEP2 Ring Beam Losses at SLAC
Conference · Fri Sep 30 00:00:00 EDT 2005 · OSTI ID:344470