Carbon attrition during the circulating fluidized bed combustion of a packaging-derived fuel
- Univ. Federico II of Naples, Napoli (Italy). Dept. of Chemical Engineering
- National Research Council, Napoli (Italy). Inst. for Combustion Research
Cylindrical pellets of a market-available packaging-derived fuel, obtained from a mono-material collection of polyethylene terephthalate (PET) bottles, were batchwise fed to a laboratory scale circulating fluidized bed (CFB) combustor. The apparatus, whose riser was 41 mm ID and 4 m high, was operated under both inert and oxidizing conditions to establish the relative importance of purely mechanical attrition and combustion-assisted attrition in generating carbon fines. Silica sand particles of two size distributions were used as inert materials. For each run, carbon load and carbon particle size distribution in the riser and rates of attrited carbon fines escaping the combustor were determined as a function of time. A parallel investigation was carried out with a bubbling fluidized bed (BFB) combustor to point out peculiarities of attrition in CFB combustors. After devolatilization, PET pellets generated fragile aggregates of char and sand, which easily crumbled, leading to single particles, partially covered by a carbon-rich layer. The injected fixed carbon was therefore present in the bed in three phases: an A-phase, made of aggregates of sand and char, an S-phase, made of individual carbon-covered sand particles and an F-phase, made of carbon fines, abraded by the surfaces of the A- and S-phases. The effects of the size of inert material on the different forms under which fixed carbon was present in the bed and on the rate of escape of attrited carbon fines from the combustor were investigated. Features of carbon attrition in CFB and BFB combustors are discussed.
- OSTI ID:
- 343809
- Journal Information:
- Combustion and Flame, Vol. 117, Issue 3; Other Information: PBD: May 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fluidized bed combustion of high-volatile solid fuels: An assessment of char attrition and volatile matter segregation
Fluidized bed combustion of pelletized biomass and waste-derived fuels