Design of a low cost, low magnetic susceptibility, ultrahigh vacuum compatible, flanged electrical break
Journal Article
·
· Journal of Vacuum Science and Technology, A
- Brookhaven National Laboratory, Upton, New York 11973-5000 (United States)
At Brookhaven National Laboratory, the g-2 experiment, a muon storage ring, requires a totally nonmagnetic vacuum system. All the vacuum components must have a low magnetic susceptibility. The design of the beam vacuum system requires flanged electrical breaks on pumping manifolds in order to prevent ground loops. The electrical breaks developed at Brookhaven consist of a ceramic disk clamped between two Conflat flanges. A nonconductive retaining ring is used to support and center the ceramic disk and seals with respect to the flanges. Two Helicoflex Delta seals are used to seal the flanges to the ceramic disk which has metallized surfaces in the seal area. Threaded rods which are electrically insulated from the flanges with bushings are used to provide the clamping force necessary to compress the vacuum seals. The assembly remains leak tight after repeated bakeouts up to 200{degree}C. This design offers several advantages over commercially available Conflat flanged ceramic breaks. These breaks do not use Kovar and are totally nonmagnetic. In addition to the cost being lower the overall length of the break is much shorter than commercial breaks. The same design concepts can be used for different sized Conflat flanges and for other types of flanges. The detailed design and the performance of this break are presented in this article.
- OSTI ID:
- 342631
- Report Number(s):
- CONF-971029--
- Journal Information:
- Journal of Vacuum Science and Technology, A, Journal Name: Journal of Vacuum Science and Technology, A Journal Issue: 3 Vol. 16; ISSN 0734-2101; ISSN JVTAD6
- Country of Publication:
- United States
- Language:
- English
Similar Records
UHV seal studies for the advanced photon source storage ring vacuum system
Bakable aluminium vacuum chamber and bellows with an aluminum flange and metal seal for ultrahigh vacuum
Application of porcelain enamel as an ultra-high-vacuum-compatible electrical insulator
Conference
·
Mon Dec 31 23:00:00 EST 1990
·
OSTI ID:5935234
Bakable aluminium vacuum chamber and bellows with an aluminum flange and metal seal for ultrahigh vacuum
Journal Article
·
Tue Oct 31 23:00:00 EST 1978
· J. Vac. Sci. Technol.; (United States)
·
OSTI ID:6665023
Application of porcelain enamel as an ultra-high-vacuum-compatible electrical insulator
Journal Article
·
Sat Jul 01 00:00:00 EDT 2000
· Journal of Vacuum Science and Technology. A, Vacuum, Surfaces and Films
·
OSTI ID:20217057