Recycling of aluminum matrix composites
- National Industrial Research Inst. of Nagoya (Japan)
- Nippon Light Metal Co., Kambara, Shizuoka (Japan). Research and Development Centre
Separation of matrix metals in composites was tried on alumina short fiber-reinforced aluminum and 6061 alloy composites and SiC whisker-reinforced 6061 alloy composite for recycling. It is possible to separate molten matrix metals from fibers in the composites using fluxes that are used for melt treatment to remove inclusions. About 50 vol pct of the matrix metals was separated from the alumina short fiber-reinforced composites. The separation ratio of the matrix from the SiC whisker-reinforced 6061 alloy composite was low and about 20 vol pct. The separation mechanism was discussed thermodynamically using interface free energies. Since the flux/fiber interface energy is smaller than the aluminum/fiber interface energy, the replacement of aluminum with fluxes in composites takes place easily. Gases released by the decomposition of fluxes act an important role in pushing out the molten matrix metal from the composite. The role was confirmed by the great amount cavity formed in the composite after the matrix metal flowed out.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 335301
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Journal Name: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science Journal Issue: 3 Vol. 40; ISSN MMTAEB; ISSN 1073-5623
- Country of Publication:
- United States
- Language:
- English
Similar Records
Interfacial characteristics for brazing of aluminum matrix composites with Al-12Si filler metals
Corrosive wear of SiC whisker- and particulate-reinforced 6061 aluminum alloy composites