JET divertor coils, manufacture, assembly and testing
Journal Article
·
· IEEE Transactions on Magnetics
- JET Joint Undertaking, Abingdon (United Kingdom)
- Ansaldo GIE, Genova (Italy)
Four coils have been built and installed in the JET vacuum vessel to produce divertor plasmas. The coils are copper with glass epoxy insulation and are enclosed in vacuum tight Inconel cases. At the coil contractor`s factory, the coil parts were manufactured and process techniques qualified. In the JET vacuum vessel the conductors bars were brazed to form the coils, which were inserted in the casings and impregnated and cured with epoxy resin.
- OSTI ID:
- 33488
- Report Number(s):
- CONF-930926--
- Journal Information:
- IEEE Transactions on Magnetics, Journal Name: IEEE Transactions on Magnetics Journal Issue: 4Pt2 Vol. 30; ISSN IEMGAQ; ISSN 0018-9464
- Country of Publication:
- United States
- Language:
- English
Similar Records
The jet divertor coils
Stress analysis and design of the Swiss LCT coil
Fabrication of the new poloidal field coils for DIII-D
Conference
·
Tue Dec 31 23:00:00 EST 1991
· IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
·
OSTI ID:5293910
Stress analysis and design of the Swiss LCT coil
Conference
·
Tue Sep 01 00:00:00 EDT 1981
· IEEE Trans. Magn.; (United States)
·
OSTI ID:6382844
Fabrication of the new poloidal field coils for DIII-D
Conference
·
Sat Nov 30 23:00:00 EST 1985
·
OSTI ID:6056706