Effects of stream surface inclination on tip leakage flow fields in compressor rotors
- Kyushu Univ., Fukuoka (Japan). Dept. of Energy and Mechanical Engineering
Experimental and computational results of tip leakage flow fields in a diagonal flow rotor at the design flow rate are compared with those in an axial flow rotor. In the diagonal flow rotor, the casing and hub walls are inclined at 25 deg and 45 deg, respectively, to the axis of rotation, and the blade has airfoil sections with almost the same tip solidity as that of the axial flow rotor. It is found out that ``breakdown`` of the tip leakage vortex occurs at the aft part of the passage in the diagonal flow rotor. The ``vortex breakdown`` causes significant changes in the nature of the tip leakage vortex: disappearance of the vortex core, large expansion of the vortex, and appearance of low relative velocity region in the vortex. These changes result in a behavior of the tip leakage flow that is substantially different from that in the axial flow rotor: no rolling-up of the leakage vortex downstream of the rotor, disappearance of the casing pressure trough at the aft part of the rotor passage, large spread of the low-energy fluid due to the leakage flow, much larger growth of the casing wall boundary layer, and considerable increase in the absolute tangential velocity in the casing wall boundary layer. The vortex breakdown influences the overall performance, also: large reduction of efficiency with the tip clearance, and low level of noise.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 316083
- Report Number(s):
- CONF-970604--
- Journal Information:
- Journal of Turbomachinery, Journal Name: Journal of Turbomachinery Journal Issue: 4 Vol. 120; ISSN JOTUEI; ISSN 0889-504X
- Country of Publication:
- United States
- Language:
- English
Similar Records
An experimental study of heat transfer in a large-scale turbine rotor passage
Measurement of the three-dimensional tip region flow field in an axial compressor