Microstructural and mechanical behavior of a duplex stainless steel under hot working conditions
- Centro de Estudios e Investigaciones Tecnicas de Gipuzkoa, San Sebastian (Spain). Dept. of Materials
- Univ. of Navarra, San Sebastian (Spain)
In the hot deformation of the duplex stainless steels, the complexity of the microstructure evolution and mechanical response is increased as compared with those of single-phase ferritic or austenitic stainless steels. In the present work, plane strain compression and torsion deformation modes have been used to analyze the microstructural evolution and the mechanical behavior of a duplex stainless steel in as-cast and wrought conditions, as a function of spatial phase distribution, the nature of interface, and the relative mechanical properties of both phases. The law of mixtures has been used to explain the different flow curves obtained when changing the phase distribution and/or the deformation mode. On deforming as-cast microstructures, the deformation partitions vary heterogeneously between both phases and some austenite areas act as hard nondeforming particles. Cracks have been observed to occur at the interface of such regions, from relatively low strains, for which the initial Kurdjumov-Sachs orientation relationship between ferrite and austenite is still present.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 316032
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Journal Name: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science Journal Issue: 12 Vol. 29; ISSN 1073-5623; ISSN MMTAEB
- Country of Publication:
- United States
- Language:
- English
Similar Records
Influence of microstructure on the flow behavior of duplex stainless steels at high temperatures
Phase Transformation of Thermally Aged and Neutron Irradiated Duplex Stainless Steel Used in LWRs. Final report