Novel Modular Heat Engines with sCO2 Bottoming Cycle Utilizing Advanced Oil-Free Turbomachinery
- GE Aerospace Research, Niskayuna, NY (United States)
This report presents the thermal, mechanical, and electric machine design of a 27krpm rotating test rig aimed at reducing technical risks with hermetic oil-free super-critical carbon dioxide (sCO2) turbomachinery. The test rig rotor system is based on a conceptual turbomachine design discussed that evaluates a sCO2 waste heat recovery (WHR) unit for land-based gas turbines at natural gas (NG) compressor stations. The key novelty of the hermetic sCO2 turbomachine concept is the utilization of additively manufactured CO2 gas bearings and a CO2-immersed direct-drive permanent magnet (PM) electric machine. The previous effort on conceptual design identified 3 main technical risks, which included thrust bearing load capacity, rotordynamics, and thermal performance of the system. Therefore, key requirements of the test vehicle include the ability to test the rotor system in a 400psi (27.6 bar) hermetic CO2 operating environment, apply up to 1,500 lbs (6.7 kN) of rotor thrust loads, capability to assess rotordynamics with radial gas bearings, inclusion of instrumentation to assess thrust bearing load capability, and flexibility for varying secondary cooling flows to confirm thermal model predictions. Design topics such as rotordynamics, bearing design, and electric machine design are addressed, while highlighting critical elements. In addition, additive build trials for Inconel 718 radial and thrust bearings were performed to prove the manufacturability of the bearing design concepts. The results of the design efforts yield a test rig concept with ability to operate at 27,000 rpm, apply thrust loads to 1,500 lbs, deliver CO2 up to 800psi, and modulate cooling flows.
- Research Organization:
- GE Aerospace Research, Niskayuna, NY (United States)
- Sponsoring Organization:
- USDOE Office of Fossil Energy and Carbon Management (FECM)
- DOE Contract Number:
- FE0031617;
- OSTI ID:
- 3017565
- Country of Publication:
- United States
- Language:
- English
Similar Records
Paper #50 Preliminary Sizing of Active Magnetic Bearings for sCO2 Waste-Heat Recovery Application
Additively Manufactured Compliant Hybrid Gas Thrust Bearing for Supercritical Carbon Dioxide Turbomachinery: Experimental Evaluation and Fluid–Structure Model Predictions
High-Temperature Active Magnetic Bearing Development for Supercritical CO2 Machinery Applications
Conference
·
Sun Feb 25 23:00:00 EST 2024
·
OSTI ID:2318721
Additively Manufactured Compliant Hybrid Gas Thrust Bearing for Supercritical Carbon Dioxide Turbomachinery: Experimental Evaluation and Fluid–Structure Model Predictions
Journal Article
·
Fri May 07 00:00:00 EDT 2021
· Journal of Engineering for Gas Turbines and Power
·
OSTI ID:1848488
High-Temperature Active Magnetic Bearing Development for Supercritical CO2 Machinery Applications
Technical Report
·
Thu Aug 28 00:00:00 EDT 2025
·
OSTI ID:2586732