Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Multimode turbulent flow measurements using magnetic resonance imaging- and laser-based techniques and computational fluid dynamics simulations

Journal Article · · Physics of Fluids
DOI:https://doi.org/10.1063/5.0283540· OSTI ID:3002437

We studied the flow field characteristics of a turbulent flow over a regularized cube array with a perpendicular injection flow through the floor between the second and third cubical elements, representing the complex flow interactions of a 3D jet and the wake flows behind cubical obstacles. Four different experimental measurements were performed: two magnetic resonance imaging-based measurements for three-dimensional three-component velocity (MRV) and concentration (MRC) and two laser-based techniques, particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF), for two-dimensional two-component velocity and concentration measurement, respectively. The mainstream Reynolds number is Re = 15 000⁠, based on the primary inlet velocity Um and channel height DH⁠, whereas the injector Reynolds number is Rej = 3400⁠, based on the injector velocity Uj and the injector's exit width Dj⁠. Numerical simulations were performed for the studied flow configuration of turbulent flow over a regularized cube array using Reynolds-averaged Navier–Stokes (RANS) and large-eddy simulation (LES) approaches. Results obtained from experimental measurements—including MRV, MRC, PIV, and PLIF—as well as RANS and LES simulations are discussed and compared along several horizontal and vertical planes of the studied configuration. In addition, 3D turbulent flow structures, such as leading-edge vortex, horseshoe vortex, and jet shear-layer vortex, and the isosurfaces of scalar concentration successfully revealed by MRV and MRC techniques were found to be in very good agreement with those 3D features extracted from RANS and LES simulations. In conclusion, the high-resolution experimental and numerical database obtained from this study could be useful for validation and verification of numerical codes.

Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Science (SC); USDOE Laboratory Directed Research and Development (LDRD) Program
Grant/Contract Number:
AC05-00OR22725
OSTI ID:
3002437
Journal Information:
Physics of Fluids, Journal Name: Physics of Fluids Journal Issue: 9 Vol. 37; ISSN 1089-7666; ISSN 1070-6631
Publisher:
American Institute of Physics (AIP)Copyright Statement
Country of Publication:
United States
Language:
English

References (52)

Three‐dimensional hemodynamics in intracranial aneurysms: influence of size and morphology journal October 2013
Efficient detection of spurious vectors in particle image velocimetry data journal February 1994
Magnetic resonance velocimetry: applications of magnetic resonance imaging in the measurement of fluid motion journal October 2007
Phase correlation processing for DPIV measurements journal March 2008
Planar laser induced fluorescence in aqueous flows journal April 2008
Three-dimensional concentration field measurements in a mixing layer using magnetic resonance imaging journal October 2009
A method for automatic estimation of instantaneous local uncertainty in particle image velocimetry measurements journal July 2012
Validation of magnetic resonance concentration measurements with adiabatic wall temperature measurements journal November 2016
Time-resolved PIV measurements in a low-aspect ratio facility of randomly packed spheres and flow analysis using modal decomposition journal July 2018
The 2019 MRV challenge: turbulent flow through a U-bend journal June 2020
An improved three-dimensional concentration measurement technique using magnetic resonance imaging journal January 2020
Experimental investigation of turbulent characteristics in pore-scale regions of porous media journal March 2021
MRV challenge 2: phase locked turbulent measurements in a roughness array journal January 2023
In Vitro Assessment of Flow Variability in an Intracranial Aneurysm Model Using 4D Flow MRI and Tomographic PIV journal June 2020
Volumetric Measurements of Mean Velocity Vector and Reynolds Stress Tensor for CFD Validation: Magnetic Resonance Velocimetry in a Nuclear Fuel Assembly Model with Mixing Grids journal January 2025
Validation of magnetic resonance velocimetry for mean velocity measurements of turbulent flows in a circular pipe journal March 2017
Hemodynamic Study of a Patient-Specific Intracranial Aneurysm: Comparative Assessment of Tomographic PIV, Stereoscopic PIV, In Vivo MRI and Computational Fluid Dynamics journal November 2021
The prediction of laminarization with a two-equation model of turbulence journal February 1972
A new k-ϵ eddy viscosity model for high reynolds number turbulent flows journal March 1995
Verification and validation in computational fluid dynamics journal April 2002
A synthetic-eddy-method for generating inflow conditions for large-eddy simulations journal August 2006
Fluid flow investigations within a 37 element CANDU fuel bundle supported by magnetic resonance velocimetry and computational fluid dynamics journal August 2017
Development and validation of an MRI-based method for 3D particle concentration measurement journal June 2018
Large-eddy simulation of an impinging jet in a cross-flow on a heated wall-mounted cube journal January 2009
Heat transfer and vortical structures around a rotating cylinder with a spanwise disk and low-velocity crossflow journal September 2013
Improving MRI turbulence quantification by addressing the measurement errors caused by the derivatives of the turbulent velocity field – Sequence development and in-vitro validation journal April 2025
Fluid flow in a diametrally expanded CANDU fuel channel – Part 1: Experimental study journal February 2020
Velocity field and flow redistribution in a ballooned 7×7 fuel bundle measured by magnetic resonance velocimetry journal December 2020
Commissioning of an MRI test facility for CFD-grade flow experiments in replicas of nuclear fuel assemblies and other reactor components journal April 2021
Precise CCD image analysis for planar laser-induced fluorescence experiments journal April 2006
Highly resolved large-eddy simulation of separated flow in a channel with streamwise periodic constrictions journal January 1999
Subgrid-Scale Stress Modelling Based on the Square of the Velocity Gradient Tensor journal September 1999
Experimental investigation of cross flow mixing in a randomly packed bed and streamwise vortex characteristics using particle image velocimetry and proper orthogonal decomposition analysis journal February 2019
Experimental investigation of turbulent wake flows in a helically wrapped rod bundle in presence of localized blockages journal July 2020
Comparison and validation of various turbulence models for U-bend flow with a magnetic resonance velocimetry experiment journal December 2021
Flow analysis in a 37-pin wire-wrapped rod bundle for sodium-cooled fast reactor using magnetic resonance velocimetry. I. Validation and gross behavior journal September 2024
Flow analysis in a 37-pin wire-wrapped rod bundle for sodium-cooled fast reactor using magnetic resonance velocimetry. II. Detailed characterization and influence of wire angular position journal September 2024
Enhancing flow uniformity and reducing turbulent kinetic energy in refrigerator freezers through magnetic resonance velocimetry-based structural modifications journal November 2024
Digital particle image velocimetry (DPIV) robust phase correlation journal April 2009
Uncertainty on PIV mean and fluctuating velocity due to bias and random errors journal February 2013
Multi-modality cerebral aneurysm haemodynamic analysis: in vivo 4D flow MRI, in vitro volumetric particle velocimetry and in silico computational fluid dynamics journal September 2019
High-Precision Time-of-Flight Determination Algorithm for Ultrasonic Flow Measurement journal August 2019
A Review of Holography Applications in Multiphase Flow Visualization Study journal September 1986
Detailed Velocity and Heat Transfer Measurements in an Advanced Gas Turbine Vane Insert Using Magnetic Resonance Velocimetry and Infrared Thermometry journal September 2021
Magnetic Resonance Velocimetry of a Turbine Blade With Engine-Representative Internal and Film Cooling Structures journal October 2022
Comparison of intracranial aneurysm flow quantification techniques: standard PIV vs stereoscopic PIV vs tomographic PIV vs phase-contrast MRI vs CFD journal July 2018
X-Ray Flow Visualization in Multiphase Flows journal January 2021
Particle Image Velocimetry for Complex and Turbulent Flows journal January 2013
New Trends in Experimental Turbulence Research journal January 1975
Synthetic turbulent inflow conditions based on a vortex method for large-eddy simulation journal January 2006
Combined temperature and velocity field measurements in thermal fluid systems with magnetic resonance velocimetry journal February 2022
Magnetic resonance thermometry: Methodology, pitfalls and practical solutions journal December 2015

Similar Records

Using 3D Measurements from MRI to Improve VVUQ
Conference · Sun Jun 01 00:00:00 EDT 2025 · OSTI ID:3002759

Model Validation of Flow and Dispersion Around a Cube
Technical Report · Wed Jan 19 23:00:00 EST 2000 · OSTI ID:792338

Experimental and Numerical Investigation of a Swirl Stabilized Premixed Combustor under Cold Flow Conditions
Journal Article · Sun Jul 01 00:00:00 EDT 2007 · Journal of Fluids Engineering · OSTI ID:919525