Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Magnetic gauge instrumentation on the LANL gas-driven two-stage gun

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.55682· OSTI ID:295489
; ; ;  [1]
  1. Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)
The LANL gas-driven two-stage gun was designed and built to do initiation studies on insensitive high explosives as well as equation of state and reaction experiments on other materials. The preferred method of measuring reaction phenomena involves the use of in-situ magnetic particle velocity gauges. In order to accommodate this type of gauging in our two-stage gun, it has a 50-mm-diameter launch tube. We have used magnetic gauging on our 72-mm bore diameter single-stage gun for over 15 years and it has proven a very effective technique for all types of shock wave experiments, including those on high explosives. This technique has now been installed on our gas-driven two-stage gun. We describe the method used, as well as some of the difficulties that arose during the installation. Several magnetic gauge experiments have been completed on plastic materials. Waveforms obtained in some of the experiments will be discussed. Up to 10 in-situ particle velocity measurements can be made in a single experiment. This new technique is now working quite well, as is evidenced by the data. To our knowledge, this is the first time magnetic gauging has been used on a two-stage gun. {copyright} {ital 1998 American Institute of Physics.}
Sponsoring Organization:
USDOE
OSTI ID:
295489
Report Number(s):
CONF-970707--
Journal Information:
AIP Conference Proceedings, Journal Name: AIP Conference Proceedings Journal Issue: 1 Vol. 429; ISSN 0094-243X; ISSN APCPCS
Country of Publication:
United States
Language:
English