Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Solidification behavior of Al particles embedded in a Zr aluminide matrix

Journal Article · · Acta Metallurgica et Materialia

A hyperperitectic Al-50 wt% Zr alloy has been manufactured by melt spinning, and the resulting microstructure has been examined by transmission electron microscopy. As-melt spun and annealed hyperperitectic Al-50 wt% Zr consist of a Zr aluminide matrix and an Al rich phase distributed in the form of small and large particles with sizes {approximately}15 and {approximately}100 nm, and as an irregular layer at the cell and grain boundaries. Diffraction analysis of the Zr aluminide matrix is consistent with the aluminide having a tetragonal unit cell with a = 4.014 {angstrom} and c = 17.32 {angstrom}, similar to equilibrium D0{sub 23} tetragonal ZrAl{sub 3} but with a different stoichiometry and different atomic ordering on alternate (004) planes. The Al rich particles show a (001){sub Al}{parallel}(001){sub Matrix}; [100]{sub Al}{parallel}[100]{sub Matrix} orientation relationship with the Zr aluminide matrix. The solidification nucleation kinetics of the Al rich particles have been examined by heating and cooling experiments in a differential scanning calorimeter over a range of heating and cooling rates. Solidification of Al rich particles is nucleated catalytically on the Zr aluminide matrix at an undercooling in the range 0--5 K. Analysis of the solidification nucleation kinetics of the Al rich particles supports the hypothesis that the classical spherical cap model of heterogeneous nucleation breaks down at low undercoolings and small contact angles.

OSTI ID:
27876
Journal Information:
Acta Metallurgica et Materialia, Journal Name: Acta Metallurgica et Materialia Journal Issue: 2 Vol. 43; ISSN 0956-7151; ISSN AMATEB
Country of Publication:
United States
Language:
English