Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

A second generation charge integrator and encoder ASIC

Journal Article · · IEEE Transactions on Nuclear Science
DOI:https://doi.org/10.1109/23.507171· OSTI ID:276481
;  [1]
  1. Fermi National Accelerator Lab., Batavia, IL (United States)
A second generation charge integrator and encoder ASIC (QIE5) has been designed for the KTeV experiment at Fermilab. It is intended to be used in conjunction with a FADC (typically eight bits) to digitize photomultiplier tube (PMT) current pulses at a fast rate, with variable resolution over a 16 bit dynamic range. QIE5 integrates pulses of up to 30 ma peak on eight nonoverlapping binary scaled ranges. A system clock of up to 53 MHz controls the integration period and readout rate. The device is pipelined so that there is no signal deadtime. For each clock period, one range is selected depending on the signal magnitude, and the output of that range is routed to the QIE5 analog output and fed to the FADC to form the mantissa. The selected range is encoded and output as a three bit digital exponent. With this method, the measurement resolution is a relatively constant fraction of the signal over a large dynamic range. Previous reports have described a single ended device (QIE2) which had inherent limitations. The QIE5 is a fully differential design and contains numerous other features which provide significant performance improvements. The new design philosophy and test results are presented for the first time.
DOE Contract Number:
AC02-76CH03000
OSTI ID:
276481
Report Number(s):
CONF-951073--
Journal Information:
IEEE Transactions on Nuclear Science, Journal Name: IEEE Transactions on Nuclear Science Journal Issue: 3Pt2 Vol. 43; ISSN IETNAE; ISSN 0018-9499
Country of Publication:
United States
Language:
English