Spent-fuel verification measurements using passive and active radiation techniques
This paper describes an evolutionary development process that will lead to spent fuel measurements that directly measure fissile reactivity. First, the Fork measurement system has been used to verify the burnup of pressurized water reactor (PWR) spent-fuel assemblies at U.S. nuclear utilities. Fork measurements have demonstrated the utility of the passive Fork system to verify reactor records with a single 100-second measurement on each assembly. Second, an Advanced Fork system incorporating collimated gamma-ray spectroscopy has been designed to permit advanced calibration techniques that are independent of reactor burnup records and to allow rapid axial scanning of spent fuel assemblies. Third, an Active Fork system incorporating a neutron source to interrogate spent fuel is proposed to provide the capability to measure fissile reactivity, when compared to measurements on fresh fuel assemblies of the same design. The Advanced and Active Fork systems have wide applicability to spent fuel verification for PWR, boiling water reactor (BWR), and U.S. Department of Energy (DOE) spent fuel.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 273752
- Report Number(s):
- SAND--96-2011C; CONF-960767--22; ON: DE96013830
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design of an advanced fork system for assembly burnup measurement
Burnup verification measurements on spent-fuel assemblies at Arkansas Nuclear One, Unit 1. Final report