Characterization of filtration and regeneration behavior of rigid ceramic filters and particle properties at high temperatures
Book
·
OSTI ID:257068
- Univ. of Karlsruhe (Germany). Inst. fuer Mechanische Verfahrenstechnik und Mechanik
For power generation with combined cycles or production of so called advanced materials by vapor phase synthesis particle separation at high temperatures is of crucial importance. There, systems working with rigid ceramic barrier filters are either of thermodynamical benefit to the process or essential for producing materials with certain properties. A hot gas filter test rig has been installed to investigate the influence of different parameters e.g. temperature, dust properties, filter media and filtration and regeneration conditions into particle separation at high temperatures. These tests were conducted both with commonly used filter candles and with filter discs made out of the same material. The filter disc is mounted at one side of the test rig. That is why both filters face the same raw gas conditions. The filter disc is flown through by a cross flow arrangement. This bases upon the conviction that for comparison of filtration characteristics of candles with filter discs or other model filters the structure of the dust cakes have to be equal. This way of conducting investigations into the influence of the above mentioned parameters on dust separation at high temperatures follows the new standard VDI 3926. There, test procedures for the characterization of filter media at ambient conditions are prescribed. The paper mainly focuses then on the influence of particle properties (e.g. stickiness etc.) upon the filtration and regeneration behavior of fly ashes with rigid ceramic filters.
- OSTI ID:
- 257068
- Report Number(s):
- CONF-950952--
- Country of Publication:
- United States
- Language:
- English
Similar Records
The Transient Regeneration in the Patchy Cleaning of Rigid Gas Filters--Comparison of Modeling to Experiment
A STUDY ON ASH PARTICLE DISTRIBUTION CHARACTERISITICS OF CANDLE FILTER SURFACE REGENERATION AT ROOM TEMPERATURE
Evaluation of dust cake filtration at high temperature with effluence from an atmospheric fluidized-bed combustor
Conference
·
Thu Sep 19 00:00:00 EDT 2002
·
OSTI ID:835855
A STUDY ON ASH PARTICLE DISTRIBUTION CHARACTERISITICS OF CANDLE FILTER SURFACE REGENERATION AT ROOM TEMPERATURE
Conference
·
Thu Sep 19 00:00:00 EDT 2002
·
OSTI ID:835885
Evaluation of dust cake filtration at high temperature with effluence from an atmospheric fluidized-bed combustor
Technical Report
·
Wed Aug 01 00:00:00 EDT 1990
·
OSTI ID:5902234