Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Plastic Additive, Sorbent-Coated, Thermally Integrated Contactor for CO2 Capture (PLASTIC4CO2) (Final Report)

Technical Report ·
DOI:https://doi.org/10.2172/2569878· OSTI ID:2569878
 [1];  [2]
  1. GE Vernova Operations, LLC, Niskayuna, NY (United States)
  2. Univ. of South Alabama, Mobile, AL (United States)
Final report for Plastic Additive, Sorbent-Coated, Thermally Integrated Contactor for CO2 Capture (PLASTIC4CO2) DE-FE-0032132. The goal of the work was to investigate at a technology readiness level of 3 (TRL 3), the proof of concept of an additively printed plastic 2-channel heat exchanger/sorbent contactor system to achieve a 15% lower levelized cost of electricity (LCOE) than a baseline liquid phase amine adsorber system for 90% and 95% capture of CO2 from both a 7F02 2x1CC and 7HA02 2x1CC natural gas turbines.
Research Organization:
National Energy Technology Laboratory (NETL), Pittsburgh, PA, Morgantown, WV (United States)
Sponsoring Organization:
USDOE Office of Fossil Energy and Carbon Management (FECM)
Contributing Organization:
GE Vernova Operations, LLC, Niskayuna, NY (United States); Univ. of South Alabama, Mobile, AL (United States); TDA Research, Golden, CO (United States)
DOE Contract Number:
FE0032132
OSTI ID:
2569878
Report Number(s):
DOE-GEVERNOVA--0032132
Country of Publication:
United States
Language:
English