Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Ionomer Optimization for Water Uptake and Swelling in Anion Exchange Membrane Electrolyzer: Oxygen Evolution Electrode

Journal Article · · Journal of the Electrochemical Society

Water electrolysis using an anion conductive, solid polymer electrolyte is an attractive method for point-of-use hydrogen production. Recent advances in catalysts and anion exchange membranes (AEM) have made alkaline devices increasingly competitive with their acidic counterparts. However, less attention has been paid to the anion conductive ionomers (ACI) used in the fabrication of electrodes for AEM electrolyzers. The ACI contributes to ion conduction between the catalyst and bulk electrolyte and serves as a binder for adhering the catalyst to the gas diffusion layer and AEM. Ionic conductivity, water uptake and ionomer swelling are critical properties for electrode performance. High ion exchange capacity (IEC) in the ionomer is desired for reduced electrode resistance, however, it can lead to excess water uptake (WU) and disruptive ACI swelling. In this study, a series of poly(norbornene)-based ionomers were synthesized, characterized and used to fabricate oxygen evolving anodes for low-temperature AEM water electrolysis. The IEC of the ionomers (0 to 4.73 meq g−1) was adjusted by controlling the ratio of ion conducting to non-ion conducting norbornene monomers in the ACI tetrablock copolymers. Low conductivity ionomers are shown to yield the best-performing oxygen evolution electrodes, in the absence of ACI polymer cross-linking because they do not experience excessive water swelling. Light cross-linking within the anode ACI was used as a means to independently lower WU of the ionomer without compromising ionic conductivity. This control over water swelling allows higher ionic conductivity within the ACI to be used in water-fed electrolyzer applications. Other methods of water management were compared including the use of hydrophobic additives and adjustment of the ionomer concentration in the electrode. As a result, it was shown that the cell performance greatly benefits from a highly conductive ionomer in the oxygen evolution reaction electrode if the WU is managed.

Research Organization:
Georgia Institute of Technology, Atlanta, GA (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
Grant/Contract Number:
EE0008833
OSTI ID:
2568169
Journal Information:
Journal of the Electrochemical Society, Journal Name: Journal of the Electrochemical Society Journal Issue: 16 Vol. 167; ISSN 1945-7111; ISSN 0013-4651
Publisher:
IOP PublishingCopyright Statement
Country of Publication:
United States
Language:
English

References (51)

Achieving High‐Performance and 2000 h Stability in Anion Exchange Membrane Fuel Cells by Manipulating Ionomer Properties and Electrode Optimization journal September 2020
A Soluble and Highly Conductive Ionomer for High-Performance Hydroxide Exchange Membrane Fuel Cells journal August 2009
Highly Efficient Platinum Group Metal Free Based Membrane-Electrode Assembly for Anion Exchange Membrane Water Electrolysis journal December 2013
A review on reforming bio-ethanol for hydrogen production journal October 2007
Electrochemical performances of PEM water electrolysis cells and perspectives journal March 2011
A comparison of cathodes for zero gap alkaline water electrolysers for hydrogen production journal May 2012
A comprehensive review on PEM water electrolysis journal April 2013
Ni/Fe electrodes prepared by electrodeposition method over different substrates for oxygen evolution reaction in alkaline medium journal March 2014
Development of efficient membrane electrode assembly for low cost hydrogen production by anion exchange membrane electrolysis journal April 2017
Minimising the ohmic resistance of an alkaline electrolysis cell through effective cell design journal September 2017
Influence of wind turbine power curve and electrolyzer operating temperature on hydrogen production in wind–hydrogen systems journal May 2011
Co-modification of Ni-based type Raney electrodeposits for hydrogen evolution reaction in alkaline media journal October 2013
Fine microstructure of high performance electrode in alkaline anion exchange membrane fuel cells journal December 2014
Effects of operating conditions on performance of high-temperature polymer electrolyte water electrolyzer journal June 2016
Importance of balancing membrane and electrode water in anion exchange membrane fuel cells journal January 2018
Steady state and transient simulation of anion exchange membrane fuel cells journal January 2018
Review of cell performance in anion exchange membrane fuel cells journal January 2018
Effect of reacting gas flowrates and hydration on the carbonation of anion exchange membrane fuel cells in the presence of CO2 journal August 2020
Anionic multiblock copolymer membrane based on vinyl addition polymerization of norbornenes: Applications in anion-exchange membrane fuel cells journal January 2019
Recent progress in alkaline water electrolysis for hydrogen production and applications journal June 2010
Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review journal February 2018
PEM electrolysis for production of hydrogen from renewable energy sources journal May 2005
Influence of Water Transport Across Microscale Bipolar Interfaces on the Performance of Direct Borohydride Fuel Cells journal April 2020
Highly Conductive Anion-Exchange Membranes Based on Cross-Linked Poly(norbornene): Vinyl Addition Polymerization journal March 2019
Highly Conducting Anion-Exchange Membranes Based on Cross-Linked Poly(norbornene): Ring Opening Metathesis Polymerization journal February 2019
Poly(ethylene- co -tetrafluoroethylene)-Derived Radiation-Grafted Anion-Exchange Membrane with Properties Specifically Tailored for Application in Metal-Cation-Free Alkaline Polymer Electrolyte Fuel Cells journal May 2007
Evaluating the Behavior of Electrolytic Gas Bubbles and Their Effect on the Cell Voltage in Alkaline Water Electrolysis journal October 2012
Solid-State Water Electrolysis with an Alkaline Membrane journal May 2012
Highly quaternized polystyrene ionomers for high performance anion exchange membrane water electrolysers journal March 2020
Nickel based electrocatalysts for oxygen evolution in high current density, alkaline water electrolysers journal January 2011
Anion-exchange membranes in electrochemical energy systems journal January 2014
Nickel nitride as an efficient electrocatalyst for water splitting journal January 2015
Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs journal January 2018
Anion conducting multiblock copolymers with multiple head-groups journal January 2018
A high conductivity ultrathin anion-exchange membrane with 500+ h alkali stability for use in alkaline membrane fuel cells that can achieve 2 W cm −2 at 80 °C journal January 2018
Green hydrogen from anion exchange membrane water electrolysis: a review of recent developments in critical materials and operating conditions journal January 2020
Poly(norbornene) anion conductive membranes: homopolymer, block copolymer and random copolymer properties and performance journal January 2020
First implementation of alkaline polymer electrolyte water electrolysis working only with pure water journal January 2012
Anion-exchange membranes for alkaline polymer electrolyte fuel cells comparison of pendent benzyltrimethylammonium- and benzylmethylimidazolium-head-groups journal January 2012
Clean energy and the hydrogen economy journal June 2017
Hydrogen Production From Water Electrolysis: Current Status and Future Trends journal February 2012
Overview: State-of-the Art Commercial Membranes for Anion Exchange Membrane Water Electrolysis journal August 2020
Characterization of Anion Exchange Membrane Technology for Low Cost Electrolysis journal April 2013
The Importance of Water Transport in High Conductivity and High-Power Alkaline Fuel Cells journal October 2019
Zero-Gap Alkaline Water Electrolysis Using Ion-Solvating Polymer Electrolyte Membranes at Reduced KOH Concentrations journal January 2016
Influence of Ionomer Content in IrO 2 /TiO 2 Electrodes on PEM Water Electrolyzer Performance journal January 2016
A Critical Review of Modeling Transport Phenomena in Polymer-Electrolyte Fuel Cells journal January 2014
Composite Poly(norbornene) Anion Conducting Membranes for Achieving Durability, Water Management and High Power (3.4 W/cm 2 ) in Hydrogen/Oxygen Alkaline Fuel Cells journal January 2019
Anion Conducting Ionomers for Fuel Cells and Electrolyzers journal January 2017
Critical Review—Identifying Critical Gaps for Polymer Electrolyte Water Electrolysis Development journal January 2017
Hydrogen Production by water Electrolysis with an Ultrathin Anion-exchange membrane (AEM) journal December 2018

Figures / Tables (14)


Similar Records

Ionomer Optimization for Water Uptake and Swelling in Anion Exchange Membrane Electrolyzer: Hydrogen Evolution Electrode
Journal Article · Sun Jan 31 23:00:00 EST 2021 · Journal of the Electrochemical Society · OSTI ID:1848903

Ionomer Optimization for Water Uptake and Swelling in Anion Exchange Membrane Electrolyzer: Hydrogen Evolution Electrode
Journal Article · Tue Feb 02 23:00:00 EST 2021 · Journal of the Electrochemical Society · OSTI ID:2568170

Related Subjects