Correlating processing variables to material properties in recycled polypropylene: A data‐driven approach

Estela‐García, John E.; Román, Allen J.; Osswald, Tim A.

doi:10.1002/pls2.70012

Correlating processing variables to material properties in recycled polypropylene: A data‐driven approach

Journal Article · Mon Apr 21 00:00:00 EDT 2025 · SPE Polymers

DOI:https://doi.org/10.1002/pls2.70012· OSTI ID:2560528

^[1]; Román, Allen J. ^[1]; ^[1]

Polymer Engineering Center, Department of Mechanical Engineering University of Wisconsin‐Madison Madison Wisconsin USA

Abstract

Polypropylene (PP) is one of the most widely used plastics, yet its recycling remains limited, with less than 1% of solid waste PP being reprocessed. Mechanical recycling through extrusion is the most practical method, but inconsistent reprocessing conditions introduce variability in material properties. While temperature, screw speed, and residence time influence the thermomechanical stress applied during reprocessing, there are no standardized guidelines for optimizing these parameters. This study examines how these factors shape the properties of recycled PP, using conditions designed to mimic post‐industrial recycled (PIR) scrap. Residence time was measured using colorimetric tracking and correlated with molecular weight, viscosity, and mechanical properties over multiple extrusion cycles. Data‐driven modeling, including response surface methodology, support vector machines, and artificial neural networks, identified processing temperature as the dominant factor in material degradation, followed by residence time. Mechanical properties remained stable, while viscosity decreased predictably with increasing residence time. By linking reprocessing conditions to property evolution, this study provides a method to optimize processing parameters and reduce variability in recycled PP. These findings help manufacturers improve process control, making recycled PP more predictable for reuse in manufacturing.

Highlights

Study of PIR‐quality PP without additives or compatibilizers.

Residence time analysis shows processing temperature drives PP property changes.

Mark‐Houwink enables quick molecular weight checks for quality control.

Models predict mechanical and rheological shifts in reprocessing.

Optimized processing parameters minimize property degradation in recycling.

View Journal Article

Sponsoring Organization:: USDOE

Grant/Contract Number:: EE0009285

OSTI ID:: 2560528

Alternate ID(s):: OSTI ID: 2560530

Journal Information:: SPE Polymers, Journal Name: SPE Polymers Journal Issue: 2 Vol. 6; ISSN 2690-3857

Publisher:: Wiley Blackwell (John Wiley & Sons)Copyright Statement

Country of Publication:: United States

Language:: English

References (52)

Experimental study of the residence time distribution in plasticating screw extruders Wolf, David; White, Don H. AIChE Journal, Vol. 22, Issue 1 https://doi.org/10.1002/aic.690220115	journal	January 1976
Influence of recycling and contamination on structure and transport properties of polypropylene Incarnato, Loredana; Scarfato, Paola; Acierno, Domenico Journal of Applied Polymer Science, Vol. 89, Issue 7 https://doi.org/10.1002/app.12168	journal	May 2003
Melt flow index values and molecular weight distributions of commercial thermoplastics Bremner, T.; Rudin, A.; Cook, D. G. Journal of Applied Polymer Science, Vol. 41, Issue 7-8 https://doi.org/10.1002/app.1990.070410721	journal	January 1990
Determination of the molecular characteristics of commercial polyethylenes with different architectures and the relation with the melt flow index Teresa Rodríguez‐Hernández, M.; Angulo‐Sánchez, J. L.; Pérez‐Chantaco, A. Journal of Applied Polymer Science, Vol. 104, Issue 3 https://doi.org/10.1002/app.25625	journal	February 2007
Thermo‐oxidative degradation behavior of recycled polypropylene Nasir, Asad; Yasin, Tariq; Islam, Atif Journal of Applied Polymer Science, Vol. 119, Issue 6 https://doi.org/10.1002/app.32918	journal	September 2010
Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review Vilaplana, Francisco; Karlsson, Sigbritt Macromolecular Materials and Engineering, Vol. 293, Issue 4 https://doi.org/10.1002/mame.200700393	journal	April 2008
A Study on Recycled Polymers Recovered from Multilayer Plastic Packaging Films by Solvent‐Targeted Recovery and Precipitation (STRAP) Cecon, Victor S.; Curtzwiler, Greg W.; Vorst, Keith L. Macromolecular Materials and Engineering, Vol. 307, Issue 11 https://doi.org/10.1002/mame.202200346	journal	August 2022
Thermal and mechanical degradation during polymer extrusion processing Capone, C.; Di Landro, L.; Inzoli, F. Polymer Engineering & Science, Vol. 47, Issue 11 https://doi.org/10.1002/pen.20882	journal	January 2007
Mechano‐chemical degradation and stabilization of polymers Scott, Gerald Polymer Engineering & Science, Vol. 24, Issue 13 https://doi.org/10.1002/pen.760241302	journal	September 1984
Polymer Degradation and Stabilization Hawkins, W. Lincoln Polymers Properties and Applications https://doi.org/10.1007/978-3-642-69376-2	book	January 1984
Circular Economy: Global Perspective Ghosh, Sadhan Kumar https://doi.org/10.1007/978-981-15-1052-6	book	January 2020
On viscosity ? melt flow index relationship Dutta, A. Rheologica Acta, Vol. 23, Issue 5 https://doi.org/10.1007/bf01329290	journal	September 1984
From melt flow index to rheogram Shenoy, A. V.; Chattopadhyay, S.; Nadkarni, V. M. Rheologica Acta, Vol. 22, Issue 1 https://doi.org/10.1007/bf01679833	journal	January 1983
Chemical aspects of polymer recycling Chanda, Manas Advanced Industrial and Engineering Polymer Research, Vol. 4, Issue 3 https://doi.org/10.1016/j.aiepr.2021.06.002	journal	July 2021
Residence time distribution (RTD) revisited Rodrigues, Alírio E. Chemical Engineering Science, Vol. 230 https://doi.org/10.1016/j.ces.2020.116188	journal	February 2021
Mixed post-consumer recycled polyolefins as a property tuning material for virgin polypropylene Curtzwiler, Greg W.; Schweitzer, Matthew; Li, Yifan Journal of Cleaner Production, Vol. 239 https://doi.org/10.1016/j.jclepro.2019.117978	journal	December 2019
Plastics in the context of the circular economy and sustainable plastics recycling: Comprehensive review on research development, standardization and market Shamsuyeva, Madina; Endres, Hans-Josef Composites Part C: Open Access, Vol. 6 https://doi.org/10.1016/j.jcomc.2021.100168	journal	October 2021
Dissolution of adhesive resins present in plastic waste to recover polyolefin by sink-float separation processes Mumbach, Guilherme Davi; de Sousa Cunha, Ricardo; Machado, Ricardo Antonio Francisco Journal of Environmental Management, Vol. 243 https://doi.org/10.1016/j.jenvman.2019.05.021	journal	August 2019
Open-loop recycling to apply refrigerator plastics from post-consumer waste polypropylene Ha, Kyung Ho Materials & Design, Vol. 35 https://doi.org/10.1016/j.matdes.2011.09.062	journal	March 2012
Study of the degradation mechanisms of polyethylene during reprocessing Mendes, A. A.; Cunha, A. M.; Bernardo, C. A. Polymer Degradation and Stability, Vol. 96, Issue 6 https://doi.org/10.1016/j.polymdegradstab.2011.02.015	journal	June 2011
Effect of talc content on the degradation of re-extruded polypropylene/talc composites Wang, K.; Bahlouli, N.; Addiego, F. Polymer Degradation and Stability, Vol. 98, Issue 7 https://doi.org/10.1016/j.polymdegradstab.2013.04.006	journal	July 2013
Thermo-mechanical degradation of polypropylene (PP) and low-density polyethylene (LDPE) blends exposed to simulated recycling Saikrishnan, Sainiwetha; Jubinville, Dylan; Tzoganakis, Costas Polymer Degradation and Stability, Vol. 182 https://doi.org/10.1016/j.polymdegradstab.2020.109390	journal	December 2020
A statistical approach to the development of flame retardant and mechanically strong natural fibers biocomposites Pérez-Chávez, Ricardo; Sánchez-Aguilar, Jöns; Calderas, Fausto Polymer Degradation and Stability, Vol. 201 https://doi.org/10.1016/j.polymdegradstab.2022.109991	journal	July 2022
Recycling of personal protective equipment: Sanitisation, degradation and polymer blend formulations Infurna, Giulia; Romani, Alessia; Riccelli, Maria Chiara Polymer Degradation and Stability, Vol. 234 https://doi.org/10.1016/j.polymdegradstab.2025.111249	journal	April 2025
Rheological properties of polypropylene during multiple extrusion da Costa, Helson M.; Ramos, Valéria D.; Rocha, Marisa C. G. Polymer Testing, Vol. 24, Issue 1 https://doi.org/10.1016/j.polymertesting.2004.06.006	journal	February 2005
A correlation between the variable melt flow index and the molecular mass distribution of virgin and recycled polypropylene used in the manufacturing of battery cases Ferg, E. E.; Bolo, L. L. Polymer Testing, Vol. 32, Issue 8 https://doi.org/10.1016/j.polymertesting.2013.09.009	journal	December 2013
Optimized design of environmentally-friendly polydopamine nanoparticles for the stabilization of both thermo- and photo-oxidation of polypropylene: Size effects Chen, Jiaxing; Xia, Lei; Kong, Miqiu Polymer Testing, Vol. 116 https://doi.org/10.1016/j.polymertesting.2022.107795	journal	December 2022
Nanoscale particles for polymer degradation and stabilization—Trends and future perspectives Kumar, Annamalai Pratheep; Depan, Dilip; Singh Tomer, Namrata Progress in Polymer Science, Vol. 34, Issue 6 https://doi.org/10.1016/j.progpolymsci.2009.01.002	journal	June 2009
A case study of the open-loop recycling of mixed plastic waste for use in a sports-field drainage system Williams, Thomas G. J. L.; Heidrich, Oliver; Sallis, Paul J. Resources, Conservation and Recycling, Vol. 55, Issue 2 https://doi.org/10.1016/j.resconrec.2010.08.002	journal	December 2010
Conceptualizing the circular economy: An analysis of 114 definitions Kirchherr, Julian; Reike, Denise; Hekkert, Marko Resources, Conservation and Recycling, Vol. 127 https://doi.org/10.1016/j.resconrec.2017.09.005	journal	December 2017
The challenges in recycling post-consumer polyolefins for food contact applications: A review Cecon, Victor S.; Da Silva, Paulo F.; Curtzwiler, Greg W. Resources, Conservation and Recycling, Vol. 167 https://doi.org/10.1016/j.resconrec.2021.105422	journal	April 2021
Recycling of a post-industrial printed multilayer plastic film containing polyurethane inks by solvent-targeted recovery and precipitation Sánchez-Rivera, Kevin L.; Munguía-López, Aurora del Carmen; Zhou, Panzheng Resources, Conservation and Recycling, Vol. 197 https://doi.org/10.1016/j.resconrec.2023.107086	journal	October 2023
A comprehensive review of global production and recycling methods of polyolefin (PO) based products and their post-recycling applications Jubinville, Dylan; Esmizadeh, Elnaz; Saikrishnan, Sainiwetha Sustainable Materials and Technologies, Vol. 25 https://doi.org/10.1016/j.susmat.2020.e00188	journal	September 2020
Post-consumer polymers (PCR) for color retention of delicatessen meats and elucidation of the light blocking mechanism Olson, Emily; Liu, Fei; Bahns, Ted Sustainable Materials and Technologies, Vol. 25 https://doi.org/10.1016/j.susmat.2020.e00193	journal	September 2020
Mechanical and chemical recycling of solid plastic waste Ragaert, Kim; Delva, Laurens; Van Geem, Kevin Waste Management, Vol. 69 https://doi.org/10.1016/j.wasman.2017.07.044	journal	November 2017
Data-Driven Machine Learning Approach for Modeling the Production and Predicting the Characteristics of Aligned Electrospun Nanofibers López-Flores, Francisco Javier; Ornelas-Guillén, Jorge Andrés; Pérez-Nava, Alejandra Industrial & Engineering Chemistry Research, Vol. 63, Issue 22 https://doi.org/10.1021/acs.iecr.4c00075	journal	March 2024
Waste Polypropylene Plastic Recycling toward Climate Change Mitigation and Circular Economy: Energy, Environmental, and Technoeconomic Perspectives Bora, Raaj R.; Wang, Ralph; You, Fengqi ACS Sustainable Chemistry & Engineering, Vol. 8, Issue 43 https://doi.org/10.1021/acssuschemeng.0c06311	journal	October 2020
Expanding plastics recycling technologies: chemical aspects, technology status and challenges Li, Houqian; Aguirre-Villegas, Horacio A.; Allen, Robert D. Green Chemistry, Vol. 24, Issue 23 https://doi.org/10.1039/D2GC02588D	journal	January 2022
Quantifying the environmental benefits of a solvent-based separation process for multilayer plastic films Munguía-López, Aurora del Carmen; Göreke, Dilara; Sánchez-Rivera, Kevin L. Green Chemistry, Vol. 25, Issue 4 https://doi.org/10.1039/d2gc04262b	journal	January 2023
High-purity Polypropylene from Disposable Face Masks via Solvent-Targeted Recovery and Precipitation Yu, Jiuling; Munguía-López, Aurora del Carmen; Cecon, Victor S. Green Chemistry https://doi.org/10.1039/d3gc00205e	journal	January 2023
Internal and External Residence-Time Distributions Buffham, B. A. Chemical Engineering Communications, Vol. 22, Issue 1-2 https://doi.org/10.1080/00986448308940048	journal	July 1983
Plastics recycling: challenges and opportunities Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward Philosophical Transactions of the Royal Society B: Biological Sciences, Vol. 364, Issue 1526 https://doi.org/10.1098/rstb.2008.0311	journal	July 2009
Production, use, and fate of all plastics ever made Geyer, Roland; Jambeck, Jenna R.; Law, Kara Lavender Science Advances, Vol. 3, Issue 7 https://doi.org/10.1126/sciadv.1700782	journal	July 2017
Recycling of Plastics, Metals, and Their Composites Ilyas, R. A.; Sapuan, S. M.; Bayraktar, Emin https://doi.org/10.1201/9781003148760	book	January 2021
Understanding Polymer Processing: Processes and Governing Equations Osswald, Tim A.; Román, Allen Jonathan https://doi.org/10.3139/9781569909379	book	January 2025
Plastic Recycling Goodship, Vannessa Science Progress, Vol. 90, Issue 4 https://doi.org/10.3184/003685007x228748	journal	October 2007
Predicting Properties of Fused Filament Fabrication Parts through Sensors and Machine Learning Liu, Zijie; Mazzei Capote, Gerardo A.; Grubis, Evan Journal of Manufacturing and Materials Processing, Vol. 7, Issue 5 https://doi.org/10.3390/jmmp7050186	journal	October 2023
Optimization of Polymer Processing: A Review (Part I—Extrusion) Gaspar-Cunha, António; Covas, José A.; Sikora, Janusz Materials, Vol. 15, Issue 1 https://doi.org/10.3390/ma15010384	journal	January 2022
Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling Ceretti, Daniel V. A.; Edeleva, Mariya; Cardon, Ludwig Molecules, Vol. 28, Issue 5 https://doi.org/10.3390/molecules28052344	journal	March 2023
Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials Jamnongkan, Tongsai; Intraramongkol, Nitchanan; Samoechip, Wesarach Polymers, Vol. 14, Issue 24 https://doi.org/10.3390/polym14245482	journal	December 2022
The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene Delva, Laurens; Ragaert, Kim; Degrieck, Joris Polymers, Vol. 6, Issue 12 https://doi.org/10.3390/polym6122912	journal	December 2014
Sustainable Additive Manufacturing: Mechanical Response of Polypropylene over Multiple Recycling Processes Vidakis, Nectarios; Petousis, Markos; Tzounis, Lazaros Sustainability, Vol. 13, Issue 1 https://doi.org/10.3390/su13010159	journal	December 2020

Similar Records

In‐mold rheology and automated process control for injection molding of recycled polypropylene

Journal Article · Wed Jun 19 00:00:00 EDT 2024 · Polymer Engineering and Science · OSTI ID:2375534

Correlating processing variables to material properties in recycled polypropylene: A data‐driven approach

Citation Formats

References (52)

Similar Records

Related Subjects