Thermal Conductivity of a Novel Salt-Hydrogel Complex as a Phase Change Material for Building Thermal Management

Conference · Thu Apr 13 04:00:00 EDT 2023

DOI:https://doi.org/10.2172/2540063· OSTI ID:2540063

Hsieh, Daniel ^[1]; Lee, Youngmun ^[1]; Prabhudesai, Mayur ^[1]; Kang, Sung Bum ^[1]; Chang, Ho Chan ^[1]; Fu, Wuchen ^[1]; Taylor, Jay ^[1]; Braun, Paul ^[2]; Miljkovic, Nenad ^[3]; Sinha, Sanjiv ^[1]

---

1. University of Illinois Urbana-Champaign
2. University of Illinois Urbana-Champaign; Materials Research Laboratory
3. University of Illinois Urbana-Champaign,Materials Research Laboratory

Use of electricity for space heating, ventilation and air conditioning in buildings may be better managed through temporary energy storage. Compared with electrochemical storage, the levelized cost of thermal energy storage systems can be lower depending on geographical location and thermophysical properties [1]. In any phase change material (PCM), the rate of absorption and release of thermal energy increases with higher thermal conductivity [2]. However, leading PCMs like paraffin waxes have thermal conductivities on the order of 0.1 W/mK. Glauber’s salt, a salt hydrate, possesses a relatively high thermal conductivity but suffers from supercooling and phase segregation. Research has shown that polymer-based composites with salt hydrates can prevent phase segregation and limit supercooling over hundreds of cycles [3] though the thermal conductivity of the composite may be reduced leading to low energy storage rates. Here, we report thermal conductivity measurements on polymer hydrogels which are stable in solutions of Glauber’s salt. To measure thermal conductivity of soft gels, we use a 3-omega method [4] where heat flows bidirectionally through a substrate below and through a gel placed on top. This suits measurements of both gels and liquids unlike transient plane heat source or transient hot wire methods. We report measurements of thermal conductivity of salt-hydrogel complexes as a function of temperature, cross-linking and salt concentration. In addition, we present modeling of thermal conductivity of sodium sulfate solutions with available theories. We finally employ polarized optical microscopy to observe inside the transparent hydrogel networks, showing that precipitating crystals may influence thermal conductivity measurements for high salt concentrations. Our thermal conductivity results combined with enthalpy of phase change, mass density and specific heat are essential to accurately design thermal storage systems for energy-efficient buildings.

• Research Organization: University of Illinois Urbana-Champaign
• Sponsoring Organization: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Building Technologies Office
• DOE Contract Number: EE0009680
• OSTI ID: 2540063
• Report Number(s): DOE-UIUC-0009680-2
• Country of Publication: United States
• Language: English

Related Subjects

composite
thermal conductivity