Mechanical and microstructural characterization of thermally grown alumina on Kanthal APMT

Beck, Peter; Hassan, Md. Mehadi; van Veelen, Arjen; Saleh, Tarik; Matthews, Christopher; Kardoulaki, Erofili; Eftink, Benjamin

doi:10.1016/j.jnucmat.2025.155753

Mechanical and microstructural characterization of thermally grown alumina on Kanthal APMT

Journal Article · Thu May 01 00:00:00 EDT 2025 · Journal of Nuclear Materials

DOI:https://doi.org/10.1016/j.jnucmat.2025.155753· OSTI ID:2530660

; Hassan, Md. Mehadi; ; Saleh, Tarik; Matthews, Christopher; ;

Not Available

View Journal Article

Sponsoring Organization:: USDOE Advanced Research Projects Agency - Energy (ARPA-E); USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: 89233218CNA000001

OSTI ID:: 2530660

Journal Information:: Journal of Nuclear Materials, Journal Name: Journal of Nuclear Materials Journal Issue: C Vol. 609; ISSN 0022-3115

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (44)

The tensile straining of oxidized Fe‐Cr‐Al‐Y alloys Golightly, F. A.; Stott, F. H.; Wood, G. C. Materials and Corrosion, Vol. 30, Issue 7 https://doi.org/10.1002/maco.19790300705	journal	July 1979
Temperature dependence of metastable alumina formation during thermal oxidation of FeCrAl foils Berthomé, G.; N'Dah, E.; Wouters, Y. Materials and Corrosion, Vol. 56, Issue 6 https://doi.org/10.1002/maco.200403851	journal	June 2005
Ruby structure peculiarities derived from X-ray diffraction data localization of chromium atoms and electron deformation density Tsirelson, V. G.; Yu. Antipin, M.; Gerr, R. G. physica status solidi (a), Vol. 87, Issue 2 https://doi.org/10.1002/pssa.2210870204	journal	February 1985
The Metallurgy of Anodizing Aluminum Runge, Jude Mary https://doi.org/10.1007/978-3-319-72177-4	book	January 2018
The influence of alloying elements on the development and maintenance of protective scales Stott, F. H.; Wood, G. C.; Stringer, J. Oxidation of Metals, Vol. 44, Issue 1-2 https://doi.org/10.1007/BF01046725	journal	August 1995
The mechanical failure of oxide scales under tensile or compressive load Nagl, M. M.; Evans, W. T. Journal of Materials Science, Vol. 28, Issue 23 https://doi.org/10.1007/BF01352181	journal	December 1993
Effects of the alumina scale on the room-temperature tensile behavior of preoxidized MA 956 Chao, J.; González-Carrasco, J. L.; Ibáñez, J. Metallurgical and Materials Transactions A, Vol. 27, Issue 12 https://doi.org/10.1007/BF02595630	journal	December 1996
Effect of Al and Cr Content on Air and Steam Oxidation of FeCrAl Alloys and Commercial APMT Alloy Unocic, Kinga A.; Yamamoto, Yukinori; Pint, Bruce A. Oxidation of Metals, Vol. 87, Issue 3-4 https://doi.org/10.1007/s11085-017-9745-1	journal	March 2017
Oxidation of FeCrAl alloy: influence of temperature and atmosphere on scale growth rate and mechanism Badini, C.; Laurella, F. Surface and Coatings Technology, Vol. 135, Issue 2-3 https://doi.org/10.1016/S0257-8972(00)00989-0	journal	January 2001
The displacement of the thermally grown oxide in thermal barrier systems upon temperature cycling Karlsson, A. M.; Hutchinson, J. W.; Evans, A. G. Materials Science and Engineering: A, Vol. 351, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00843-2	journal	June 2003
A review of focused ion beam milling techniques for TEM specimen preparation Giannuzzi, L. A.; Stevie, F. A. Micron, Vol. 30, Issue 3 https://doi.org/10.1016/S0968-4328(99)00005-0	journal	June 1999
Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation Tolpygo, V. K.; Clarke, D. R. Acta Materialia, Vol. 48, Issue 13 https://doi.org/10.1016/S1359-6454(00)00156-7	journal	August 2000
Yielding and strain hardening of thin metal films on substrates Nix, William D. Scripta Materialia, Vol. 39, Issue 4-5 https://doi.org/10.1016/S1359-6462(98)00195-X	journal	August 1998
Rumpling induced by thermal cycling of an overlay coating: the effect of coating thickness Tolpygo, V. K.; Clarke, D. R. Acta Materialia, Vol. 52, Issue 3 https://doi.org/10.1016/j.actamat.2003.10.001	journal	February 2004
Surface oxide cracking associated with oxidation-induced grain boundary sliding in the underlying alloy Nychka, J. Acta Materialia, Vol. 52, Issue 5 https://doi.org/10.1016/j.actamat.2003.10.042	journal	March 2004
The stresses and distortions caused by formation of a thermally grown alumina: comparison between measurements and simulations Nychka, J. A.; Xu, T.; Clarke, D. R. Acta Materialia, Vol. 52, Issue 9 https://doi.org/10.1016/j.actamat.2004.02.004	journal	May 2004
Materials challenges in nuclear energy Zinkle, S. J.; Was, G. S. Acta Materialia, Vol. 61, Issue 3 https://doi.org/10.1016/j.actamat.2012.11.004	journal	February 2013
Effect of thermal cycling on protective properties of alumina scale grown on thin Haynes 214 foil Chyrkin, A.; Mortazavi, N.; Halvarsson, M. Corrosion Science, Vol. 98 https://doi.org/10.1016/j.corsci.2015.06.020	journal	September 2015
Carburization behavior of FeCrAl alloy APMT and the critical role of pre-oxidation Kosmidou, Maria; Nizolek, Thomas J.; Rizk, Jason T. Corrosion Science, Vol. 224 https://doi.org/10.1016/j.corsci.2023.111520	journal	November 2023
Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors Yamamoto, Y.; Pint, B. A.; Terrani, K. A. Journal of Nuclear Materials, Vol. 467 https://doi.org/10.1016/j.jnucmat.2015.10.019	journal	December 2015
Mandrel diameter effect on ring-pull testing of nuclear fuel cladding Beck, Peter M.; Hayne, Mathew L.; Liu, Cheng Journal of Nuclear Materials, Vol. 596 https://doi.org/10.1016/j.jnucmat.2024.155087	journal	August 2024
Mechanical failure of anodized aluminum under three and four-point bending tests Bargui, M.; Bensalah, W.; Elleuch, K. Materials & Design, Vol. 51 https://doi.org/10.1016/j.matdes.2013.03.087	journal	October 2013
Wrinkling behavior of alumina scales formed during isothermal oxidation of Fe–Al binary alloys Yang, Z. -G.; Hou, P. Y. Materials Science and Engineering: A, Vol. 391, Issue 1-2 https://doi.org/10.1016/j.msea.2004.05.016	journal	January 2005
Effect of Fe–Al substrate mechanical properties on alumina scale morphology Dryepondt, S.; Pint, B. A. Materials Science and Engineering: A, Vol. 497, Issue 1-2 https://doi.org/10.1016/j.msea.2008.07.005	journal	December 2008
Experimental assessment of micromechanical models for fragmentation analysis of thin metal oxide coatings on polymer films under uniaxial tensile deformation Tavares da Costa, Marcus Vinícius; Bolinsson, Jessica; Neagu, R. Cristian Surface and Coatings Technology, Vol. 370 https://doi.org/10.1016/j.surfcoat.2019.03.035	journal	July 2019
Chemical and Mechanical Pressure-Induced Photoluminescence Tuning via Structural Evolution and Hydrostatic Pressure Chen, Kuan-Chun; Fang, Mu-Huai; Huang, Wen-Tse Chemistry of Materials, Vol. 33, Issue 10 https://doi.org/10.1021/acs.chemmater.1c01041	journal	May 2021
High-Temperature Stress Measurements During the Oxidation of NiAl Schumann, E.; Sarioglu, C.; Blachere, J. R. Oxidation of Metals, Vol. 53, Issue 3/4, p. 259-272 https://doi.org/10.1023/A:1004585003083	journal	April 2000
Stress Relaxation in Thermally Grown Alumina Scales on Heating and Cooling FeCrAl and FeCrAlY Alloys Mennicke, C.; Clarke, D. R.; Rühle, M. Oxidation of Metals, Vol. 55, Issue 5/6, p. 551-569 https://doi.org/10.1023/A:1010316000529	journal	June 2001
The Fracture of Surface Coatings on a Strained Substrate Grosskreutz, J. C.; McNeil, M. B. Journal of Applied Physics, Vol. 40, Issue 1 https://doi.org/10.1063/1.1657059	journal	January 1969
The Mechanical Properties of Anodic Oxides and their Influence on Fatigue Behaviour of Aluminium Alloys Hockenhull, B. S.; Gupta, S. S.; Hurst, R. C. Transactions of the IMF, Vol. 54, Issue 1 https://doi.org/10.1080/00202967.1976.11870384	journal	January 1976
Influence of tensile strain on the corrosion of preoxidized MA 956 in an S-O-C-bearing atmosphere Guttmann, V.; Mediavilla, A.; Ruano, O. Materials at High Temperatures, Vol. 11, Issue 1-4 https://doi.org/10.1080/09603409.1993.11689438	journal	January 1993
Experimental data on oxide fracture Nagl, M. M.; Saunders, S. R. J.; Guttmann, V. Materials at High Temperatures, Vol. 12, Issue 2-3 https://doi.org/10.1080/09603409.1994.11689482	journal	June 1994
Failure of oxide scales Hancock, P.; Nicholls, J. R. Materials at High Temperatures, Vol. 12, Issue 2-3 https://doi.org/10.1080/09603409.1994.11689488	journal	June 1994
Fracture of oxide films on strained aluminium Edeleanu, C.; Law, T. J. Philosophical Magazine, Vol. 7, Issue 76 https://doi.org/10.1080/14786436208212625	journal	April 1962
GSAS-II : the genesis of a modern open-source all purpose crystallography software package Toby, Brian H.; Von Dreele, Robert B. Journal of Applied Crystallography, Vol. 46, Issue 2 https://doi.org/10.1107/S0021889813003531	journal	March 2013
Positive and negative monoclinic deformation of corundum-type trigonal crystal structures of M ₂O₃ metal oxides Fabrykiewicz, Piotr; Przeniosło, Radosław; Sosnowska, Izabela Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials, Vol. 74, Issue 6 https://doi.org/10.1107/S2052520618014968	journal	November 2018
Residual Stresses in Meta/Ceramic Bonded Strips Hsueh, C. H.; Evans, A. G. Journal of the American Ceramic Society, Vol. 68, Issue 5 https://doi.org/10.1111/j.1151-2916.1985.tb15316.x	journal	May 1985
Structural Evolution of Corundum at High Temperatures Kondo, Saki; Tateishi, Kenji; Ishizawa, Nobuo Japanese Journal of Applied Physics, Vol. 47, Issue 1 https://doi.org/10.1143/JJAP.47.616	journal	January 2008
Mechanical Properties of Thin Films Alexopoulos, P. S.; O'Sullivan, T. C. Annual Review of Materials Science, Vol. 20, Issue 1 https://doi.org/10.1146/annurev.ms.20.080190.002135	journal	August 1990
The Mechanical Properties of Thin Anodic Films on Aluminum Bradhurst, D. H.; Llewelyn Leach, J. S. Journal of The Electrochemical Society, Vol. 113, Issue 12 https://doi.org/10.1149/1.2423797	journal	January 1966
Oxidation Studies on the Iron-Chromium-Aluminum Heater Alloys Gulbransen, Earl A.; Andrew, Kenneth F. Journal of The Electrochemical Society, Vol. 106, Issue 4 https://doi.org/10.1149/1.2427333	journal	January 1959
Limits to adherence of oxide scales Robertson, J.; Manning, M. I. Materials Science and Technology, Vol. 6, Issue 1 https://doi.org/10.1179/mst.1990.6.1.81	journal	January 1990
Redetermination of the chromium position in ruby McCauley, James W.; Gibbs, G. V. Zeitschrift für Kristallographie, Vol. 135, Issue 5-6 https://doi.org/10.1524/zkri.1972.135.5-6.453	journal	September 1972
The Influence of Al₂O₃on the Properties of Alkali-Activated Slag Cement Kim, Tae-Wan; Kang, Choong-Hyun Journal of the Korea Concrete Institute, Vol. 28, Issue 2 https://doi.org/10.4334/JKCI.2016.28.2.205	journal	April 2016

Similar Records

Microstructure, mechanical properties and strengthening mechanisms of friction stir welded Kanthal APMT™ steel

Journal Article · Sun Sep 30 20:00:00 EDT 2018 · Journal of Nuclear Materials · OSTI ID:1693648

Characterization of Kanthal APMT and T91 oxidation at beyond design-basis accident temperatures

Journal Article · Tue Mar 24 20:00:00 EDT 2020 · Corrosion Science · OSTI ID:1633642

Mechanical and microstructural characterization of thermally grown alumina on Kanthal APMT

Citation Formats

References (44)

Similar Records

Related Subjects