Effect of recycling on the time- and temperature-dependent mechanical properties of PP/MWCNT composite liner materials

Bata, Attila; Gerse, Péter; Kun, Krisztián; Slezák, Emese; Ronkay, Ferenc

doi:10.1016/j.rineng.2025.104150

Effect of recycling on the time- and temperature-dependent mechanical properties of PP/MWCNT composite liner materials

Journal Article · Fri Feb 28 23:00:00 EST 2025 · Results in Engineering

DOI:https://doi.org/10.1016/j.rineng.2025.104150· OSTI ID:2529519

Bata, Attila; Gerse, Péter; Kun, Krisztián; Slezák, Emese;

Not Available

View Journal Article

Sponsoring Organization:: USDOE

OSTI ID:: 2529519

Journal Information:: Results in Engineering, Journal Name: Results in Engineering Journal Issue: C Vol. 25; ISSN 2590-1230

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (42)

Dispersion and mechanical properties of polypropylene/multiwall carbon nanotubes composites obtained via dynamic packing injection molding Xiao, Yan; Zhang, Xiaoqing; Cao, Wen Journal of Applied Polymer Science, Vol. 104, Issue 3 https://doi.org/10.1002/app.25852	journal	February 2007
Creep Resistant Polymer Nanocomposites Reinforced with Multiwalled Carbon Nanotubes Yang, Jinglei; Zhang, Zhong; Friedrich, Klaus Macromolecular Rapid Communications, Vol. 28, Issue 8 https://doi.org/10.1002/marc.200600866	journal	April 2007
Evaluation of surface modification impact on PP/MWCNT nanocomposites by rheological and mechanical characterization, assisted with morphological image processing Zadhoush, Ali; Reyhani, Reyhaneh; Naeimirad, Mohammadreza Polymer Composites, Vol. 40, Issue S1 https://doi.org/10.1002/pc.24799	journal	February 2018
Alteration of the mechanical behaviour of polypropylene owing to successive introduction of multiwall carbon nanotubes and stretching Katerelos, D. T. G.; Joffe, R.; Labou, D. Mechanics of Composite Materials, Vol. 45, Issue 4 https://doi.org/10.1007/s11029-009-9092-7	journal	July 2009
Multiwalled carbon nanotube/polypropylene composites : investigation of the melt processing by injection molding and analysis of the resulting mechanical behaviour Thiébaud, F.; Gelin, J. C. International Journal of Material Forming, Vol. 2, Issue S1 https://doi.org/10.1007/s12289-009-0474-0	journal	August 2009
Thermal and mechanical properties of single-walled carbon nanotubes–polypropylene composites prepared by melt processing Manchado, M. A. López; Valentini, L.; Biagiotti, J. Carbon, Vol. 43, Issue 7 https://doi.org/10.1016/j.carbon.2005.01.031	journal	June 2005
Gas barrier performance of graphene/polymer nanocomposites Cui, Yanbin; Kundalwal, S. I.; Kumar, S. Carbon, Vol. 98 https://doi.org/10.1016/j.carbon.2015.11.018	journal	March 2016
Mechanism of gas barrier improvement of graphene/polypropylene nanocomposites for new-generation light-weight hydrogen storage Liu, Mufeng; Lin, Kailing; Zhou, Mingyu Composites Science and Technology, Vol. 249 https://doi.org/10.1016/j.compscitech.2024.110483	journal	April 2024
Flexural properties of multi-wall carbon nanotube/polypropylene composites: Experimental investigation and nonlocal modeling Patti, A.; Barretta, R.; Marotti de Sciarra, F. Composite Structures, Vol. 131 https://doi.org/10.1016/j.compstruct.2015.05.002	journal	November 2015
Electrical resistivity and rheological behaviors of carbon nanotubes-filled polypropylene composites Seo, Min-Kang; Park, Soo-Jin Chemical Physics Letters, Vol. 395, Issue 1-3 https://doi.org/10.1016/j.cplett.2004.07.047	journal	September 2004
An overview on the technologies used to store hydrogen AlZohbi, G.; Almoaikel, A.; AlShuhail, L. Energy Reports, Vol. 9 https://doi.org/10.1016/j.egyr.2023.08.072	journal	October 2023
A review on the factors of liner collapse in type IV hydrogen storage vessels Kis, Dávid István; Kókai, Eszter International Journal of Hydrogen Energy, Vol. 50 https://doi.org/10.1016/j.ijhydene.2023.09.316	journal	January 2024
A study of pyrolysis and pyrolysis products of flame-retardant cotton fabrics by DSC, TGA, and PY–GC–MS Zhu, Ping; Sui, Shuying; Wang, Bing Journal of Analytical and Applied Pyrolysis, Vol. 71, Issue 2 https://doi.org/10.1016/j.jaap.2003.09.005	journal	June 2004
Hard-to-recycle plastics in the automotive sector: Economic, environmental and technical analyses of possible actions. Ravina, Marco; Bianco, Isabella; Ruffino, Barbara Journal of Cleaner Production, Vol. 394 https://doi.org/10.1016/j.jclepro.2023.136227	journal	March 2023
Characterization and some physical studies of PVA/PVP filled with MWCNTs Zidan, Hamdy M.; Abdelrazek, Elmetwally M.; Abdelghany, Amr M. Journal of Materials Research and Technology, Vol. 8, Issue 1 https://doi.org/10.1016/j.jmrt.2018.04.023	journal	January 2019
Effect of multi walled carbon nanotube on mechanical, thermal and rheological properties of polypropylene Yetgin, Salih Hakan Journal of Materials Research and Technology, Vol. 8, Issue 5 https://doi.org/10.1016/j.jmrt.2019.08.018	journal	September 2019
Effect of MWCNT Composition on the Hardness of PP/MWCNT Composites Bansal, Siddharth; Kumar, Navin; Jindal, Prashant Materials Today: Proceedings, Vol. 4, Issue 2 https://doi.org/10.1016/j.matpr.2017.02.285	journal	January 2017
Reinforcement of polymers with carbon nanotubes. The role of an ordered polymer interfacial region. Experiment and modeling Coleman, Jonathan N.; Cadek, Martin; Ryan, Kevin P. Polymer, Vol. 47, Issue 26 https://doi.org/10.1016/j.polymer.2006.10.014	journal	December 2006
Preparation and properties of biodegradable PBS/multi-walled carbon nanotube nanocomposites Shih, Y. F.; Chen, L. S.; Jeng, R. J. Polymer, Vol. 49, Issue 21 https://doi.org/10.1016/j.polymer.2008.08.015	journal	October 2008
Energy futures and green hydrogen production: Is Saudi Arabia trend? Hassan, Qusay; Sameen, Aws Zuhair; Salman, Hayder M. Results in Engineering, Vol. 18 https://doi.org/10.1016/j.rineng.2023.101165	journal	June 2023
A theoretical study on the hydrogen filling process of the on-board storage cylinder in hydrogen refueling station Li, Ji-Qiang; Li, Ji-Chao; Wang, Xiang-Yang Results in Engineering, Vol. 18 https://doi.org/10.1016/j.rineng.2023.101168	journal	June 2023
Review on the thermal neutrality of application-oriented liquid organic hydrogen carrier for hydrogen energy storage and delivery Yang, Yikun; Wu, Zhen; Li, Ruiqing Results in Engineering, Vol. 19 https://doi.org/10.1016/j.rineng.2023.101394	journal	September 2023
Comparative analysis of solar cells and hydrogen fuel: A mini-review Shaker, Lina M.; Mohammed, Jabbar K.; Basem, Ali Results in Engineering, Vol. 23 https://doi.org/10.1016/j.rineng.2024.102507	journal	September 2024
High entropy alloys for hydrogen storage applications: A machine learning-based approach Radhika, N.; Niketh, Madabhushi Siri; Akhil, U. V. Results in Engineering, Vol. 23 https://doi.org/10.1016/j.rineng.2024.102780	journal	September 2024
Innovative hybrid energy storage systems with sustainable integration of green hydrogen and energy management solutions for standalone PV microgrids based on reduced fractional gradient descent algorithm Younis, Ramy Adel; Touti, Ezzeddine; Aoudia, Mouloud Results in Engineering, Vol. 24 https://doi.org/10.1016/j.rineng.2024.103229	journal	December 2024
Dynamic mechanical properties of multiwall carbon nanotube reinforced ABS composites and their correlation with entanglement density, adhesion, reinforcement and C factor Jyoti, Jeevan; Singh, Bhanu Pratap; Arya, Abhishek K. RSC Advances, Vol. 6, Issue 5 https://doi.org/10.1039/C5RA25561A	journal	January 2016
Cole–Cole relation for long-chain branching from general rigid bead–rod theory Coombs, S. J.; Kanso, M. A.; Giacomin, A. J. Physics of Fluids, Vol. 32, Issue 9 https://doi.org/10.1063/5.0024402	journal	September 2020
Effect of natural filler materials on fiber reinforced hybrid polymer composites: An Overview Jagadeesh, Praveenkumara; Puttegowda, Madhu; Thyavihalli Girijappa, Yashas Gowda Journal of Natural Fibers, Vol. 19, Issue 11 https://doi.org/10.1080/15440478.2020.1854145	journal	December 2020
A Review on Applicability, Limitations, and Improvements of Polymeric Materials in High-Pressure Hydrogen Gas Atmospheres Balasooriya, Winoj; Clute, Clara; Schrittesser, Bernd Polymer Reviews, Vol. 62, Issue 1 https://doi.org/10.1080/15583724.2021.1897997	journal	March 2021
Benchmarking of graphene-based materials: real commercial products versus ideal graphene Kovtun, Alessandro; Treossi, Emanuele; Mirotta, Nicola 2D Materials, Vol. 6, Issue 2 https://doi.org/10.1088/2053-1583/aafc6e	journal	January 2019
Multi-walled Carbon Nanotube Filled Polypropylene Nanocomposites: Electrical, Mechanical, Rheological, Thermal and Morphological Investigations Petchwattana, Nawadon; Covavisaruch, Sirijutaratana; Phetsang, Katabongkot The Proceedings of the 2nd International Conference on Industrial Application Engineering 2015 https://doi.org/10.12792/iciae2015.063	conference	January 2015
Polymer Composites Filled with Multiwall Carbon Nanotubes Kartel, M.; Sementsov, Yu.; Mahno, S. Universal Journal of Materials Science, Vol. 4, Issue 2 https://doi.org/10.13189/ujms.2016.040202	journal	March 2016
Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: Improvement of dispersion and mechanical properties through PP-g-MA addition Prashantha, K.; Soulestin, J.; Lacrampe, M. F. Express Polymer Letters, Vol. 2, Issue 10 https://doi.org/10.3144/expresspolymlett.2008.87	journal	January 2008
Validation of Selected Optical Methods for Assessing Polyethylene (PE) Liners Used in High Pressure Vessels for Hydrogen Storage Gąsior, Paweł; Wachtarczyk, Karol; Błachut, Aleksander Applied Sciences, Vol. 11, Issue 12 https://doi.org/10.3390/app11125667	journal	June 2021
Thermal and Mechanical Assessment of PLA-SEBS and PLA-SEBS-CNT Biopolymer Blends for 3D Printing Ádám, Balázs; Weltsch, Zoltán Applied Sciences, Vol. 11, Issue 13 https://doi.org/10.3390/app11136218	journal	July 2021
Fuel Cell Electric Vehicles—A Brief Review of Current Topologies and Energy Management Strategies Sorlei, Ioan-Sorin; Bizon, Nicu; Thounthong, Phatiphat Energies, Vol. 14, Issue 1 https://doi.org/10.3390/en14010252	journal	January 2021
A Review on Industrial Perspectives and Challenges on Material, Manufacturing, Design and Development of Compressed Hydrogen Storage Tanks for the Transportation Sector Alves, Mariana Pimenta; Gul, Waseem; Cimini Junior, Carlos Alberto Energies, Vol. 15, Issue 14 https://doi.org/10.3390/en15145152	journal	July 2022
Microstructure and Properties of Polypropylene/Carbon Nanotube Nanocomposites Bikiaris, Dimitrios Materials, Vol. 3, Issue 4 https://doi.org/10.3390/ma3042884	journal	April 2010
Controlled Thermal Release of L-Menthol with Cellulose-Acetate-Fiber-Shelled Metal-Organic Framework Cui, Xinjiao; Ye, Donghao; Wei, Jiankun Molecules, Vol. 27, Issue 18 https://doi.org/10.3390/molecules27186013	journal	September 2022
Mechanical Properties of Clay-Reinforced Polyamide 6 Nanocomposite Liner Materials of Type IV Hydrogen Storage Vessels Kis, Dávid István; Bata, Attila; Takács, János Nanomaterials, Vol. 14, Issue 17 https://doi.org/10.3390/nano14171385	journal	August 2024
Review on the Processing and Properties of Polymer Nanocomposites and Nanocoatings and Their Applications in the Packaging, Automotive and Solar Energy Fields Müller, Kerstin; Bugnicourt, Elodie; Latorre, Marcos Nanomaterials, Vol. 7, Issue 4 https://doi.org/10.3390/nano7040074	journal	March 2017
Recycling of Plastics in the Automotive Sector and Methods of Removing Paint for Its Revalorization: A Critical Review Zambrano, Carla; Tamarit, Pablo; Fernandez, Ana Inés Polymers, Vol. 16, Issue 21 https://doi.org/10.3390/polym16213023	journal	October 2024

Similar Records

Effect of Cusps in Time-Dependent Quantum Mechanics

Journal Article · Wed Feb 08 23:00:00 EST 2012 · Physical Review Letters · OSTI ID:1099133

Time Dependency of Electrical Properties of MWCNT-PVDF Films Subjected to Temperature Cycling.

Conference · Thu Feb 28 23:00:00 EST 2013 · OSTI ID:1657365

Hygrothermal aging and recycling effects on mechanical and thermal properties of recyclable thermoplastic glass fiber composites

Journal Article · Wed Nov 06 23:00:00 EST 2024 · Polymer Composites · OSTI ID:2547047

Effect of recycling on the time- and temperature-dependent mechanical properties of PP/MWCNT composite liner materials

Citation Formats

References (42)

Similar Records

Related Subjects