Helicon plasma source excited by a flat spiral coil
- Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)
- Department of Chemical and Nuclear Engineering, University of New Mexico, Albuquerque, New Mexico 87131 (United States)
We have characterized a new helicon plasma source with an end-launch antenna configuration. Power at 13.56 MHz is coupled via a four-turn flat spiral coil into an {ital m}=0 helicon mode with the application of a weak ({ital B}{gt}5 G) axial magnetic field. Plasma parameters were measured with Langmuir probes, and the structure and absorption of the helicon wave fields were determined with magnetic induction probes. Plasma densities of 10{sup 11}--10{sup 12} cm{sup {minus}3} were produced in argon for pressures in the 1--100 mTorr range with a 5--60 G magnetic field. Radio frequency power absorption occurs primarily via collisionless Landau damping for pressures below 5--10 mTorr and collisional damping dominates at higher pressures. Single pass absorption occurs for magnetic fields less than 20 G. This source does not require a separate source chamber, and thus combines the compactness of flat coil inductively coupled sources with the advantages of remote plasma generation found in wave supported sources. The source can be easily optimized for a variety of operating conditions, because the helicon parallel wavelength is not constrained. {copyright} {ital 1995} {ital American} {ital Vacuum} {ital Society}
- OSTI ID:
- 249416
- Journal Information:
- Journal of Vacuum Science and Technology, A, Journal Name: Journal of Vacuum Science and Technology, A Journal Issue: 5 Vol. 13; ISSN 0734-2101; ISSN JVTAD6
- Country of Publication:
- United States
- Language:
- English
Similar Records
Wave propagation and noncollisional heating in neutral loop and helicon discharges
Understanding helicon plasmas