Solute and phase heterogeneous distribution at different scales and its effect on ageing physical phenomena in a laser powder bed fusion produced maraging steel

Santana, Ana; Eres-Castellanos, Adriana; Poplawsky, Jonathan D.; San-Martin, David; Jimenez, Jose Antonio; Urones-Garrote, Esteban; Clarke, Amy J.; Capdevila, Carlos; Caballero, Francisca G.

doi:10.1016/j.addma.2024.104494

Solute and phase heterogeneous distribution at different scales and its effect on ageing physical phenomena in a laser powder bed fusion produced maraging steel

Journal Article · Thu Aug 01 00:00:00 EDT 2024 · Additive Manufacturing

DOI:https://doi.org/10.1016/j.addma.2024.104494· OSTI ID:2472969

; ; Poplawsky, Jonathan D.; ; ; ; Clarke, Amy J.; Capdevila, Carlos; Caballero, Francisca G.

Not Available

View Journal Article

Sponsoring Organization:: USDOE

OSTI ID:: 2472969

Journal Information:: Additive Manufacturing, Journal Name: Additive Manufacturing Journal Issue: C Vol. 94; ISSN 2214-8604

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (91)

Extension of the Martensite Transformation Temperature Relation to Larger Alloying Elements and Contents Barbier, David Advanced Engineering Materials, Vol. 16, Issue 1 https://doi.org/10.1002/adem.201300116	journal	October 2013
Fracture characteristics of a burst tested maraging steel rocket motor case Diwakar, V.; Arumugham, S.; Lakshmanan, T. S. Journal of Materials Science, Vol. 20, Issue 4 https://doi.org/10.1007/BF01026331	journal	April 1985
Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels Vasudevan, Vijay K.; Kim, Sung J.; Wayman, C. Marvin Metallurgical Transactions A, Vol. 21, Issue 10 https://doi.org/10.1007/BF02646061	journal	October 1990
Phase chemistry and precipitation reactions in maraging steels: Part IV. Discussion and conclusions Sha, W.; Cerezo, A.; Smith, G. D. W. Metallurgical Transactions A, Vol. 24, Issue 6 https://doi.org/10.1007/BF02668193	journal	June 1993
Influence of temperature and aging time on hardness and magnetic properties of the maraging steel grade 300 Pardal, J. M.; Tavares, S. S. M.; Cindra Fonseca, M. P. Journal of Materials Science, Vol. 42, Issue 7 https://doi.org/10.1007/s10853-006-1317-8	journal	April 2007
Study of the austenite quantification by X-ray diffraction in the 18Ni-Co-Mo-Ti maraging 300 steel Pardal, J. M.; Tavares, S. S. M.; Cindra Fonseca, M. P. Journal of Materials Science, Vol. 41, Issue 8 https://doi.org/10.1007/s10853-006-7170-y	journal	April 2006
Effects of aging time on the microstructure and mechanical properties of laser-cladded 18Ni300 maraging steel Zhu, H. M.; Zhang, J. W.; Hu, J. P. Journal of Materials Science, Vol. 56, Issue 14 https://doi.org/10.1007/s10853-021-05841-1	journal	February 2021
Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels Zeisl, Stefan; Van Steenberge, Nele; Schnitzer, Ronald Journal of Materials Science, Vol. 58, Issue 16 https://doi.org/10.1007/s10853-023-08472-w	journal	April 2023
Observation of Precipitation Evolution in Fe-Ni-Mn-Ti-Al Maraging Steel by Atom Probe Tomography Pereloma, E. V.; Stohr, R. A.; Miller, M. K. Metallurgical and Materials Transactions A, Vol. 40, Issue 13 https://doi.org/10.1007/s11661-009-9993-z	journal	September 2009
Austenite Formation from Martensite in a 13Cr6Ni2Mo Supermartensitic Stainless Steel Bojack, A.; Zhao, L.; Morris, P. F. Metallurgical and Materials Transactions A, Vol. 47, Issue 5 https://doi.org/10.1007/s11661-016-3404-z	journal	February 2016
Evaluation of evaporation losses during electron-beam melting of Ti-Al-V alloys Ivanchenko, V. G.; Ivasishin, O. M.; Semiatin, S. L. Metallurgical and Materials Transactions B, Vol. 34, Issue 6 https://doi.org/10.1007/s11663-003-0097-7	journal	December 2003
Kinetics of Reverted Austenite in 18 wt.% Ni Grade 300 Maraging Steel: An In-Situ Synchrotron X-Ray Diffraction and Texture Study dos Santos, Luis Paulo Mourão; Béreš, Miloslav; de Castro, Mirela Oliveira JOM, Vol. 72, Issue 10 https://doi.org/10.1007/s11837-020-04254-w	journal	July 2020
Effect of Cr Contents and Heat Treating on Reverted Austenite in Maraging Steel Weldments Kim, S. W.; Lee, H. W. Metals and Materials International, Vol. 24, Issue 3 https://doi.org/10.1007/s12540-018-0078-7	journal	March 2018
Metallurgical Analysis of Defects in the Weld Joints of Large-Sized Maraging Steel Rocket Motor Casing Narayana Murty, S. V. S.; Sudarsana Rao, G.; Venugopal, A. Metallography, Microstructure, and Analysis, Vol. 3, Issue 6 https://doi.org/10.1007/s13632-014-0161-5	journal	November 2014
Precipitation hardening in a PH 13-8 Mo stainless steel Seetharaman, V.; Sundararaman, M.; Krishnan, R. Materials Science and Engineering, Vol. 47, Issue 1 https://doi.org/10.1016/0025-5416(81)90034-3	journal	January 1981
The precipitation of the intermetallic compound NiAl in Fe-19wt.%Cr alloys Taillard, R.; Pineau, A.; Thomas, B. J. Materials Science and Engineering, Vol. 54, Issue 2 https://doi.org/10.1016/0025-5416(82)90115-X	journal	July 1982
Reverted austenite during aging in 18Ni(350) maraging steel Li, Xiaodong; Yin, Zhongda Materials Letters, Vol. 24, Issue 4 https://doi.org/10.1016/0167-577X(95)00109-3	journal	July 1995
A new empirical formula for the calculation of MS temperatures in pure iron and super-low carbon alloy steels Liu, Cheng; Zhao, Zhenbo; Northwood, Derek O. Journal of Materials Processing Technology, Vol. 113, Issue 1-3 https://doi.org/10.1016/S0924-0136(01)00625-2	journal	June 2001
Microstructural evolution in a PH13-8 stainless steel after ageing Guo, Z.; Sha, W.; Vaumousse, D. Acta Materialia, Vol. 51, Issue 1 https://doi.org/10.1016/S1359-6454(02)00353-1	journal	January 2003
Precipitation in 18 wt% Ni maraging steel of grade 350 Tewari, R.; Mazumder, S.; Batra, I. S. Acta Materialia, Vol. 48, Issue 5 https://doi.org/10.1016/S1359-6454(99)00370-5	journal	March 2000
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting Murr, Lawrence E.; Martinez, Edwin; Hernandez, Jennifer Journal of Materials Research and Technology, Vol. 1, Issue 3 https://doi.org/10.1016/S2238-7854(12)70029-7	journal	October 2012
Ageing behaviour of an Fe–20Ni–1.8Mn–1.6Ti–0.59Al (wt%) maraging alloy: clustering, precipitation and hardening Pereloma, E. V.; Shekhter, A.; Miller, M. K. Acta Materialia, Vol. 52, Issue 19 https://doi.org/10.1016/j.actamat.2004.08.018	journal	November 2004
Effect of Cu on the evolution of precipitation in an Fe–Cr–Ni–Al–Ti maraging steel Schnitzer, Ronald; Schober, Michael; Zinner, Silvia Acta Materialia, Vol. 58, Issue 10 https://doi.org/10.1016/j.actamat.2010.03.010	journal	June 2010
Smaller is less stable: Size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels Wang, M-M.; Tasan, C. C.; Ponge, D. Acta Materialia, Vol. 79 https://doi.org/10.1016/j.actamat.2014.07.020	journal	October 2014
Massive nanoprecipitation in an Fe-19Ni- x Al maraging steel triggered by the intrinsic heat treatment during laser metal deposition Kürnsteiner, Philipp; Wilms, Markus B.; Weisheit, Andreas Acta Materialia, Vol. 129 https://doi.org/10.1016/j.actamat.2017.02.069	journal	May 2017
Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel Niu, Mengchao; Zhou, Gang; Wang, Wei Acta Materialia, Vol. 179 https://doi.org/10.1016/j.actamat.2019.08.042	journal	October 2019
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L Bertsch, K. M.; Meric de Bellefon, G.; Kuehl, B. Acta Materialia, Vol. 199 https://doi.org/10.1016/j.actamat.2020.07.063	journal	October 2020
Synergistic alloying effects on nanoscale precipitation and mechanical properties of ultrahigh-strength steels strengthened by Ni3Ti, Mo-enriched, and Cr-rich co-precipitates Niu, M. C.; Yin, L. C.; Yang, K. Acta Materialia, Vol. 209 https://doi.org/10.1016/j.actamat.2021.116788	journal	May 2021
Atomic-scale understanding of solute interaction effects on grain boundary segregation, precipitation, and fracture of ultrahigh-strength maraging steels Niu, M. C.; Chen, C. J.; Li, W. Acta Materialia, Vol. 253 https://doi.org/10.1016/j.actamat.2023.118972	journal	July 2023
Precipitation and reverted austenite formation in maraging 350 steel: Competition or cooperation? Feitosa, A. L. M.; Ribamar, G. G.; Escobar, J. Acta Materialia, Vol. 270 https://doi.org/10.1016/j.actamat.2024.119865	journal	May 2024
Microstructure and corrosion behavior of a novel additively manufactured maraging stainless steel Shahriari, Ayda; Khaksar, Ladan; Nasiri, Ali Electrochimica Acta, Vol. 339 https://doi.org/10.1016/j.electacta.2020.135925	journal	April 2020
Modeling of precipitation hardening during the aging and overaging of 18Ni–Co–Mo–Ti maraging 300 steel Pardal, J. M.; Tavares, S. S. M.; Terra, V. F. Journal of Alloys and Compounds, Vol. 393, Issue 1-2 https://doi.org/10.1016/j.jallcom.2004.09.049	journal	May 2005
A comprehensive review on laser powder bed fusion of steels: Processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends Narasimharaju, Shubhavardhan Ramadurga; Zeng, Wenhan; See, Tian Long Journal of Manufacturing Processes, Vol. 75 https://doi.org/10.1016/j.jmapro.2021.12.033	journal	March 2022
Melt pool temperature measurement and monitoring during laser powder bed fusion based additive manufacturing via single-camera two-wavelength imaging pyrometry (STWIP) Vallabh, Chaitanya Krishna Prasad; Zhao, Xiayun Journal of Manufacturing Processes, Vol. 79 https://doi.org/10.1016/j.jmapro.2022.04.058	journal	July 2022
Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl Klassen, Alexander; Forster, Vera E.; Juechter, Vera Journal of Materials Processing Technology, Vol. 247 https://doi.org/10.1016/j.jmatprotec.2017.04.016	journal	September 2017
Characterization of a novel maraging steel for laser-based powder bed fusion: optimization of process parameters and post heat treatments Nouri, Niki; Li, Qing; Damon, James Journal of Materials Research and Technology, Vol. 18 https://doi.org/10.1016/j.jmrt.2022.02.126	journal	May 2022
Effect of layer thickness and laser emission mode on the microstructure of an additive manufactured maraging steel Santana, Ana; Eres-Castellanos, Adriana; Jimenez, Jose Antonio Journal of Materials Research and Technology, Vol. 25 https://doi.org/10.1016/j.jmrt.2023.07.114	journal	July 2023
Additive manufacturing of 18% nickel maraging steels: Defect, structure and mechanical properties: A review Guo, Lulu; Zhang, Lina; Andersson, Joel Journal of Materials Science & Technology, Vol. 120 https://doi.org/10.1016/j.jmst.2021.10.056	journal	September 2022
On the role of cellular microstructure in austenite reversion in selective laser melted maraging steel Yao, Yingjie; Fan, Luyao; Ding, Ran Journal of Materials Science & Technology, Vol. 184 https://doi.org/10.1016/j.jmst.2023.10.032	journal	June 2024
Microstructural evolution and the variation of tensile behavior after aging heat treatment of precipitation hardened martensitic steel Shin, Jong-Ho; Jeong, JaeSuk; Lee, Jong-Wook Materials Characterization, Vol. 99 https://doi.org/10.1016/j.matchar.2014.11.024	journal	January 2015
High-temperature creep resistance and effects on the austenite reversion and precipitation of 18 Ni (300) maraging steel Reis, Adriano Gonçalves dos; Reis, Danieli Aparecida Pereira; Abdalla, Antônio Jorge Materials Characterization, Vol. 107 https://doi.org/10.1016/j.matchar.2015.08.002	journal	September 2015
Microstructural evolution and mechanical properties of maraging steel produced by wire + arc additive manufacture process Xu, Xiangfang; Ganguly, Supriyo; Ding, Jialuo Materials Characterization, Vol. 143 https://doi.org/10.1016/j.matchar.2017.12.002	journal	September 2018
Precipitation in 300 grade maraging steel built by selective laser melting: Aging at 510 °C for 2 h Bodziak, Sabrina; Al-Rubaie, Kassim S.; Valentina, Luiz Dalla Materials Characterization, Vol. 151 https://doi.org/10.1016/j.matchar.2019.02.033	journal	May 2019
Microstructure, texture, and anisotropic mechanical behavior of selective laser melted maraging stainless steels Sanjari, Mehdi; Mahmoudiniya, Mahdi; Pirgazi, Hadi Materials Characterization, Vol. 192 https://doi.org/10.1016/j.matchar.2022.112185	journal	October 2022
Reverted austenite in PH 13-8 Mo maraging steels Schnitzer, Ronald; Radis, Rene; Nöhrer, Matthias Materials Chemistry and Physics, Vol. 122, Issue 1 https://doi.org/10.1016/j.matchemphys.2010.02.058	journal	July 2010
Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel Tan, Chaolin; Zhou, Kesong; Ma, Wenyou Materials & Design, Vol. 134 https://doi.org/10.1016/j.matdes.2017.08.026	journal	November 2017
Non-metallic inclusions in 17-4PH stainless steel parts produced by selective laser melting Sun, Yu; Hebert, Rainer J.; Aindow, Mark Materials & Design, Vol. 140 https://doi.org/10.1016/j.matdes.2017.11.063	journal	February 2018
Meta-equilibrium transition microstructure for maximum austenite stability and minimum hardness in a Ti-stabilized supermartensitic stainless steel Escobar, J. D.; Oliveira, J. P.; Salvador, C. A. F. Materials & Design, Vol. 156 https://doi.org/10.1016/j.matdes.2018.07.018	journal	October 2018
The role of titanium on the microstructure and mechanical properties of additively manufactured C300 maraging steels Dehgahi, S.; Ghoncheh, M. H.; Hadadzadeh, A. Materials & Design, Vol. 194 https://doi.org/10.1016/j.matdes.2020.108965	journal	September 2020
Metal vaporization and its influence during laser powder bed fusion process Liu, Jinge; Wen, Peng Materials & Design, Vol. 215 https://doi.org/10.1016/j.matdes.2022.110505	journal	March 2022
Microstructural evolution in 13Cr–8Ni–2.5Mo–2Al martensitic precipitation-hardened stainless steel Ping, D. H.; Ohnuma, M.; Hirakawa, Y. Materials Science and Engineering: A, Vol. 394, Issue 1-2 https://doi.org/10.1016/j.msea.2004.12.002	journal	March 2005
Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel Erlach, S. D.; Leitner, H.; Bischof, M. Materials Science and Engineering: A, Vol. 429, Issue 1-2 https://doi.org/10.1016/j.msea.2006.05.071	journal	August 2006
Effect of retained austenite and high temperature Laves phase on the work hardening of an experimental maraging steel Ooi, S. W.; Hill, P.; Rawson, M. Materials Science and Engineering: A, Vol. 564 https://doi.org/10.1016/j.msea.2012.12.016	journal	March 2013
Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel Conde, F. F.; Escobar, J. D.; Oliveira, J. P. Materials Science and Engineering: A, Vol. 758 https://doi.org/10.1016/j.msea.2019.03.129	journal	June 2019
Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting Bai, Yuchao; Wang, Di; Yang, Yongqiang Materials Science and Engineering: A, Vol. 760 https://doi.org/10.1016/j.msea.2019.05.115	journal	July 2019
Steels in additive manufacturing: A review of their microstructure and properties Bajaj, P.; Hariharan, A.; Kini, A. Materials Science and Engineering: A, Vol. 772 https://doi.org/10.1016/j.msea.2019.138633	journal	January 2020
A trade-off between powder layer thickness and mechanical properties in additively manufactured maraging steels Shamsdini, SeyedAmirReza; Shakerin, Sajad; Hadadzadeh, Amir Materials Science and Engineering: A, Vol. 776 https://doi.org/10.1016/j.msea.2020.139041	journal	March 2020
Synergistic enhancement of strength and ductility of cobalt-free maraging steel via nanometer-scaled microstructures Li, Hu; Liu, Yong; Liu, Bin Materials Science and Engineering: A, Vol. 842 https://doi.org/10.1016/j.msea.2022.143099	journal	May 2022
Effect of heat treatment on the strength and fracture resistance of a laser powder bed fusion-processed 18Ni-300 maraging steel Paul, Moses J.; Muniandy, Yokasundery; Kruzic, Jamie J. Materials Science and Engineering: A, Vol. 844 https://doi.org/10.1016/j.msea.2022.143167	journal	June 2022
Abnormal three-stage plastic deformation in a 17-4 PH stainless steel fabricated by laser powder bed fusion Zhao, Dandan; Guo, Yifeng; Lai, Richen Materials Science and Engineering: A, Vol. 858 https://doi.org/10.1016/j.msea.2022.144160	journal	November 2022
The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels Zeisl, S.; Landefeld, A.; Van Steenberge, N. Materials Science and Engineering: A, Vol. 861 https://doi.org/10.1016/j.msea.2022.144313	journal	December 2022
Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel Kempen, K.; Yasa, E.; Thijs, L. Physics Procedia, Vol. 12 https://doi.org/10.1016/j.phpro.2011.03.033	journal	January 2011
Additive manufacturing of metallic components – Process, structure and properties DebRoy, T.; Wei, H. L.; Zuback, J. S. Progress in Materials Science, Vol. 92 https://doi.org/10.1016/j.pmatsci.2017.10.001	journal	March 2018
Clustering, nano-scale precipitation and strengthening of steels Xiong, Zhiping; Timokhina, Ilana; Pereloma, Elena Progress in Materials Science, Vol. 118 https://doi.org/10.1016/j.pmatsci.2020.100764	journal	May 2021
Austenite grain size and the martensite-start temperature Yang, H.; Bhadeshia, H. Scripta Materialia, Vol. 60, Issue 7 https://doi.org/10.1016/j.scriptamat.2008.11.043	journal	April 2009
The influence of the plasma-nitriding temperature on the microstructure evolution and surface properties of additive-manufactured 18Ni300 maraging steel Godec, Matjaž; Ruiz-Zepeda, Francisco; Podgornik, Bojan Surface and Coatings Technology, Vol. 433 https://doi.org/10.1016/j.surfcoat.2022.128089	journal	March 2022
Effect of heat treatment on the fatigue crack growth behaviour in additive manufactured AISI 18Ni300 steel Santos, L. M. S.; Borrego, L. P.; Ferreira, J. A. M. Theoretical and Applied Fracture Mechanics, Vol. 102 https://doi.org/10.1016/j.tafmec.2019.04.005	journal	August 2019
Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing Ren, Neng; Li, Jun; Zhang, Ruiyao Nature Communications, Vol. 14, Issue 1 https://doi.org/10.1038/s41467-023-43563-x	journal	December 2023
Effect of processing parameters on texture and variant selection of as-built 300 maraging steel processed by laser powder bed fusion Eres-Castellanos, Adriana; Santana, Ana; De-Castro, David Scientific Reports, Vol. 12, Issue 1 https://doi.org/10.1038/s41598-022-19835-9	journal	September 2022
Printability of alloys for additive manufacturing Mukherjee, T.; Zuback, J. S.; De, A. Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep19717	journal	January 2016
Microstructural characterization and properties of selective laser melted maraging steel with different build directions Tan, Chaolin; Zhou, Kesong; Kuang, Min Science and Technology of Advanced Materials, Vol. 19, Issue 1 https://doi.org/10.1080/14686996.2018.1527645	journal	October 2018
Additive manufacturing of multi-scale heterostructured high-strength steels Tan, Chaolin; Chew, Youxiang; Duan, Ranxi Materials Research Letters, Vol. 9, Issue 7 https://doi.org/10.1080/21663831.2021.1904299	journal	March 2021
Study of the aging treatment on selective laser melted maraging 300 steel Campanelli, S. L.; Contuzzi, N.; Posa, P. Materials Research Express, Vol. 6, Issue 6 https://doi.org/10.1088/2053-1591/ab0c6e	journal	March 2019
Physical processes in fusion welding DebRoy, T.; David, S. A. Reviews of Modern Physics, Vol. 67, Issue 1 https://doi.org/10.1103/RevModPhys.67.85	journal	January 1995
R values in analysis of powder diffraction data using Rietveld refinement Jansen, E.; Schäfer, W.; Will, G. Journal of Applied Crystallography, Vol. 27, Issue 4 https://doi.org/10.1107/S0021889893012348	journal	August 1994
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging Cunningham, Ross; Zhao, Cang; Parab, Niranjan Science, Vol. 363, Issue 6429 https://doi.org/10.1126/science.aav4687	journal	February 2019
Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting Jägle, Eric A.; Choi, Pyuck-Pa; Van Humbeeck, Jan Journal of Materials Research, Vol. 29, Issue 17 https://doi.org/10.1557/jmr.2014.204	journal	August 2014
Effect of Repeated Thermal Cycling on the Formation of Retained Austenite in 18%Ni 350 Grade Maraging Steel Farooque, M.; Ayub, H.; Haq, A. ul Materials Transactions, JIM, Vol. 39, Issue 9 https://doi.org/10.2320/matertrans1989.39.995	journal	January 1998
Kinetics of Martensite Reversion to Austenite during Overaging in a Maraging 350 Steel Carvalho, Leandro Gomes de; Plaut, Ronald Lesley; Lima, Nelson Batista de ISIJ International, Vol. 59, Issue 6 https://doi.org/10.2355/isijinternational.ISIJINT-2018-610	journal	June 2019
Austenite Reversion Behavior of Maraging Steel Additive-manufactured by Laser Powder Bed Fusion Takata, Naoki; Ito, Yuya; Nishida, Ryoya ISIJ International, Vol. 64, Issue 2 https://doi.org/10.2355/isijinternational.ISIJINT-2023-045	journal	January 2024
Precipitation Hardening in Maraging Steels -On the Martensitic Ternary Iron Alloys Suzuki, Tomoo Transactions of the Iron and Steel Institute of Japan, Vol. 14, Issue 2 https://doi.org/10.2355/isijinternational1966.14.67	journal	January 1974
Progress in understanding the metallurgy of 18% nickel maraging steels Rao, Muktinutalapati Nageswara International Journal of Materials Research, Vol. 97, Issue 11 https://doi.org/10.3139/146.101418	journal	November 2006
Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing Jägle, Eric; Sheng, Zhendong; Kürnsteiner, Philipp Materials, Vol. 10, Issue 1 https://doi.org/10.3390/ma10010008	journal	December 2016
Selective Laser Melting of 18NI-300 Maraging Steel Król, Mariusz; Snopiński, Przemysław; Hajnyš, Jiří Materials, Vol. 13, Issue 19 https://doi.org/10.3390/ma13194268	journal	September 2020
Vapor Pressure versus Temperature Relations of Common Elements Mondal, B.; Mukherjee, T.; Finch, N. W. Materials, Vol. 16, Issue 1 https://doi.org/10.3390/ma16010050	journal	December 2022
Effects of Gas Pressure during Electron Beam Energy Deposition in the EBM Additive Manufacturing Process Damri, Elroei; Tiferet, Eitan; Braun, Dor Metals, Vol. 11, Issue 4 https://doi.org/10.3390/met11040601	journal	April 2021
The Effect of Long-Term Ageing at 475 °C on Microstructure and Properties of a Precipitation Hardening MartensiticStainless Steel Vodárek, Vlastimil; Rožnovská, Gabriela; Kuboň, Zdeněk Metals, Vol. 12, Issue 10 https://doi.org/10.3390/met12101643	journal	September 2022
Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by Selective Laser Melting Casati, Riccardo; Lemke, Jannis; Tuissi, Ausonio Metals, Vol. 6, Issue 9 https://doi.org/10.3390/met6090218	journal	September 2016
Crystallographic Features of Microstructure in Maraging Steel Fabricated by Selective Laser Melting Takata, Naoki; Nishida, Ryoya; Suzuki, Asuka Metals, Vol. 8, Issue 6 https://doi.org/10.3390/met8060440	journal	June 2018
Effect of Process Parameters on Residual Stresses, Distortions, and Porosity in Selective Laser Melting of Maraging Steel 300 Mugwagwa, Lameck; Yadroitsev, Igor; Matope, Stephen Metals, Vol. 9, Issue 10 https://doi.org/10.3390/met9101042	journal	September 2019
Fundamentals of Solidification Kurz, W.; Fisher, D. J. https://doi.org/10.4028/www.scientific.net/RC.35	book	January 1998

Similar Records

Solute Redistribution During Aging in a Laser-Based Powder Bed Fusion-Produced Fe-18Ni-9Co-5Mo-Ti Maraging Steel

Journal Article · Tue Sep 02 20:00:00 EDT 2025 · JOM. Journal of the Minerals, Metals & Materials Society · OSTI ID:2999973

Ultrasonic characterization of material heterogeneities in stainless steel components produced by laser powder bed fusion

Journal Article · Sat Apr 05 00:00:00 EDT 2025 · Next Materials · OSTI ID:2568630

Solute and phase heterogeneous distribution at different scales and its effect on ageing physical phenomena in a laser powder bed fusion produced maraging steel

Citation Formats

References (91)

Similar Records

Related Subjects