Optimization and Experimental Validation of Annular Finned PCM-HX for a Domestic Hot Water Heater Application
Conference
·
OSTI ID:2459310
- University of Maryland; University of Maryland
- University of Maryland
The load profile for domestic water heating is time-dependent and can result in high energy demand during peak operating times. Shifting this peak load can have significant environmental and economic impacts. Phase change material (PCM)-based thermal energy storage (TES) is a potentially useful technology for peak load shifting in domestic hot water (DHW) applications thanks to its high latent heat and energy density. In this study, an annular finned-tube PCM-HX design concept was optimized for a load-shifting TES unit to meet the Department of Energy standard for a medium-usage DHW heater using a resistance-capacitance model (RCM) integrated with a Multi-Objective Genetic Algorithm. The optimized design comprised 70 identical annular finned-tube PCM-HX units connected in parallel and utilizing RT62HC as the PCM. A single PCM-HX unit was prototyped and tested in a vertically oriented setup with upward heat transfer fluid (HTF) flow. The hot water supply time was defined based on a cutoff temperature of 51.7°C. The as-designed mass flow rate (1.5 g/s) was tested to assess the performance of the prototyped PCM-HX unit for RCM validation. For the experimental investigation, RTD sensor bundles measured HTF temperature at the PCM-HX inlet and outlet, and a Coriolis flow meter accurately measured the HTF mass flow rate. The simulated discharging power underpredicted the experimental result by about 12%, and the simulated hot water supply time underpredicted the experimental result by approximately 13% for the as-designed mass flow rate (1.5 g/s). The average deviation of the hot water supply temperature between the experimental and RCM results during the complete PCM solidification process was 1.3 K for the as-designed mass flow rate. The overall good agreement between the experimental and RCM results provides confidence that computationally efficient models such as RCM can be utilized for design optimization of PCM-HXs.
- Research Organization:
- University of Maryland
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Building Technologies Office
- Contributing Organization:
- University of Maryland
- DOE Contract Number:
- EE0009158
- OSTI ID:
- 2459310
- Report Number(s):
- DOEBTO-UMD-9158-24-TA1
- Country of Publication:
- United States
- Language:
- English
Similar Records
Experimental Investigation of a Phase Change Material Charged Finned-Tube Heat Exchanger
A Novel Framework for Performance Evaluation and Design Optimization of PCM Embedded Heat Exchangers for the Built Environment
Experimental Investigation of a Phase Change Material Charged Serpentine Heat Exchanger with Louvered Fins
Conference
·
Fri Dec 31 23:00:00 EST 2021
· 19th International Refrigeration and Air Conditioning
Conference at Purdue
·
OSTI ID:1876549
A Novel Framework for Performance Evaluation and Design Optimization of PCM Embedded Heat Exchangers for the Built Environment
Technical Report
·
Tue Aug 12 00:00:00 EDT 2025
·
OSTI ID:2575584
Experimental Investigation of a Phase Change Material Charged Serpentine Heat Exchanger with Louvered Fins
Conference
·
Mon May 15 00:00:00 EDT 2023
·
OSTI ID:2466177