Application of Sequential Design of Experiments (SDoE) to Large Pilot-Scale Solvent-Based CO2 Capture Process at Technology Centre Mongstad (TCM)

Conference · Mon Mar 15 04:00:00 EDT 2021

DOI:https://doi.org/10.2139/ssrn.3811695· OSTI ID:2439763

Morgan, Joshua ^[1]; Omell, Benjamin ^[2]; Matuszewski, Michael ^[1]; Miller, David ^[2]; Shah, Muhammad Ismail ^[3]; Benquet, Christophe ^[3]; Nesse Knarvik, Anette Beate ^[3]; Cazenove, Thomas De ^[3]; Anderson-Cook, Christine ^[4]; Ahmed, Towfiq ^[4]; Tong, Charles ^[5]; Ng, Brenda ^[5]; Bhattacharyya, Debangsu ^[6]

---

1. NETL Site Support Contractor, National Energy Technology Laboratory
2. NETL
3. Technology Centre Mongstad
4. Los Alamos National Laboratory (LANL)
5. Lawrence Livermore National Laboratory (LLNL)
6. West Virginia University (WVU)

The United States Department of Energy’s Carbon Capture Simulation for Industry Impact (CCSI2) program has developed a framework for sequential design of experiments (SDoE) that aims to maximize knowledge gained from budget- and schedule-limited pilot scale testing. SDoE was applied to the planning and execution of campaigns for testing CO2 capture systems at pilot-scale in order to optimally allocate resources available for the testing. In this methodology, a stochastic process model is developed by quantifying the parametric uncertainty in submodels of interest; for a solvent-based CO2 capture system, these may include physical properties and equipment performance submodels (e.g., mass transfer, interfacial area). This uncertainty is propagated through the full process model, over variable operating conditions, for estimating the resulting uncertainty in key model outputs (e.g., percentage of CO2 capture, solvent regeneration energy requirement). In developing a data collection plan, the predicted output uncertainty is incorporated into an algorithm that seeks simultaneously to select process operating conditions for which the predicted uncertainty is relatively high and to ensure that the entire space of operation is well represented. This test plan is then used to guide operation of the pilot plant at varying steady-state conditions, with resulting process data incorporated into the existing model using Bayesian inference to refine parameter distributions. The updated stochastic model, with reduced parametric uncertainty from data collected, is then used to guide additional data collection, thus the sequential nature of the experimental design. The SDoE process was implemented at the pilot test unit (12 MWe in scale) at Norway’s Technology Centre Mongstad (TCM) in a summer 2018 test campaign with aqueous monoethanolamine (MEA). During the test campaign, the varied operating conditions included the flowrates of circulated solvent, flue gas, and reboiler steam and the CO2 concentration in the flue gas. The process data were used to update probability distributions of mass transfer and interfacial area parameters of a stochastic process model developed by the CCSI2 team. Two iterations of the SDoE process were executed, resulting in the uncertainty in model predicted CO2 capture percentage decreasing by an average of 58.0 ± 4.7% over the full input space of interest. This work demonstrates the potential of the SDoE process for model refinement through reduction in process model parametric uncertainty, and ultimately risk in scale-up, in CO2 capture technology performance.

• Research Organization: National Energy Technology Laboratory (NETL), Pittsburgh, PA, Morgantown, WV, and Albany, OR (United States)
• Sponsoring Organization: USDOE Office of Fossil Energy and Carbon Management (FECM), Office of Carbon Management (FE-20)
• OSTI ID: 2439763
• Country of Publication: United States
• Language: English