Microstructure and thermal stability of a structurally graded tungsten and reduced activation ferritic/martensitic steel joint

Robin, Ishtiaque K.; Gräning, Tim; Yang, Ying; Katoh, Yutai; Zinkle, Steven J.

doi:10.1016/j.jmrt.2024.04.087

Microstructure and thermal stability of a structurally graded tungsten and reduced activation ferritic/martensitic steel joint

Journal Article · Wed May 01 00:00:00 EDT 2024 · Journal of Materials Research and Technology

DOI:https://doi.org/10.1016/j.jmrt.2024.04.087· OSTI ID:2336848

; Gräning, Tim; Yang, Ying; Katoh, Yutai; Zinkle, Steven J.

Not Available

View Journal Article

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

Sponsoring Organization:: USDOE; USDOE Advanced Research Projects Agency - Energy (ARPA-E); USDOE Office of Science (SC), Fusion Energy Sciences (FES)

Grant/Contract Number:: AC05-00OR22725; AC05-76RL01830

OSTI ID:: 2336848

Alternate ID(s):: OSTI ID: 2438732
OSTI ID: 2440000

Report Number(s):: PNNL-SA--197749; S2238785424008615; PII: S2238785424008615

Journal Information:: Journal of Materials Research and Technology, Journal Name: Journal of Materials Research and Technology Journal Issue: C Vol. 30; ISSN 2238-7854

Publisher:: ElsevierCopyright Statement

Country of Publication:: Brazil

Language:: English

References (64)

Preparation of Fe-W amorphous films by an electroplating method Nishi, Y.; Mogi, Y.; Oguri, K. Journal of Materials Science Letters, Vol. 14, Issue 1 https://doi.org/10.1007/BF02565266	journal	January 1995
A thermodynamic evaluation of the C−Fe−W system Gustafson, Per Metallurgical Transactions A, Vol. 18, Issue 2 https://doi.org/10.1007/BF02825699	journal	February 1987
Calculating phase diagrams using PANDAT and panengine Chen, S. -L.; Zhang, F.; Xie, F. -Y. JOM, Vol. 55, Issue 12 https://doi.org/10.1007/s11837-003-0010-5	journal	December 2003
A theory of multiphase binary diffusion Shatynski, S. R.; Hirth, J. P.; Rapp, R. A. Acta Metallurgica, Vol. 24, Issue 12 https://doi.org/10.1016/0001-6160(76)90023-7	journal	December 1976
Recrystallization, grain growth and the ductile-brittle transition in tungsten sheet Farrell, K.; Schaffhauser, A. C.; Stiegler, J. O. Journal of the Less Common Metals, Vol. 13, Issue 2 https://doi.org/10.1016/0022-5088(67)90177-4	journal	August 1967
Reference vanadium alloy V4Cr4Ti for fusion application Smith, D. L.; Chung, H. M.; Loomis, B. A. Journal of Nuclear Materials, Vol. 233-237 https://doi.org/10.1016/S0022-3115(96)00231-0	journal	October 1996
Tungsten/steel diffusion bonding using Cu/W–Ni/Ni multi-interlayer Yang, Zong-hui; Shen, Yi-fu; Wang, Zhi-yang Transactions of Nonferrous Metals Society of China, Vol. 24, Issue 8 https://doi.org/10.1016/S1003-6326(14)63382-3	journal	August 2014
PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation Cao, W.; Chen, S. -L.; Zhang, F. Calphad, Vol. 33, Issue 2 https://doi.org/10.1016/j.calphad.2008.08.004	journal	June 2009
Impact of affluence, nuclear and alternative energy on US carbon emissions from 1960 to 2014 Pan, Binbin; Zhang, Yulong Energy Strategy Reviews, Vol. 32 https://doi.org/10.1016/j.esr.2020.100581	journal	November 2020
W/steel joint fabrication using the pulse plasma sintering (PPS) method Rosiński, Marcin; Kruszewski, Mirosław J.; Michalski, Andrzej Fusion Engineering and Design, Vol. 86, Issue 9-11 https://doi.org/10.1016/j.fusengdes.2011.01.083	journal	October 2011
Investigation of tungsten/EUROFER97 diffusion bonding using Nb interlayer Basuki, W. W.; Aktaa, J. Fusion Engineering and Design, Vol. 86, Issue 9-11 https://doi.org/10.1016/j.fusengdes.2011.03.017	journal	October 2011
Interfacial microstructures of HIP joined W and ferritic–martensitic steel with Ti interlayers Jung, Yang-Il; Park, Jeong-Yong; Choi, Byoung-Kwon Fusion Engineering and Design, Vol. 88, Issue 9-10 https://doi.org/10.1016/j.fusengdes.2013.02.049	journal	October 2013
Characterization of W/Fe functionally graded materials manufactured by resistance sintering under ultra-high pressure Qu, Dandan; Zhou, Zhangjian; Tan, Jun Fusion Engineering and Design, Vol. 91 https://doi.org/10.1016/j.fusengdes.2014.12.014	journal	February 2015
Microstructure and mechanical analysis of W/P91 steel HIP-joint with Ti interlayer Wang, Ji-chao; Wang, Wanjing; Sun, Zhaoxuan Fusion Engineering and Design, Vol. 112 https://doi.org/10.1016/j.fusengdes.2016.07.012	journal	November 2016
Influence of intermetallic compounds on the microstructure and strength properties of diffusion bonded W–steel joints using Ti/Ni composite interlayer Cai, Qingshan; Liu, Wensheng; Ma, Yunzhu Fusion Engineering and Design, Vol. 132 https://doi.org/10.1016/j.fusengdes.2018.05.027	journal	July 2018
Aiming at understanding thermo-mechanical loads in the first wall of DEMO: Stress–strain evolution in a Eurofer-tungsten test component featuring a functionally graded interlayer Heuer, S.; Weber, Th.; Pintsuk, G. Fusion Engineering and Design, Vol. 135 https://doi.org/10.1016/j.fusengdes.2018.07.011	journal	October 2018
Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer Cai, Qingshan; Liu, Wensheng; Ma, Yunzhu International Journal of Refractory Metals and Hard Materials, Vol. 48 https://doi.org/10.1016/j.ijrmhm.2014.09.002	journal	January 2015
Interdiffusion in Cr–Fe–Co–Ni medium-entropy alloys Durand, A.; Peng, L.; Laplanche, G. Intermetallics, Vol. 122 https://doi.org/10.1016/j.intermet.2020.106789	journal	July 2020
Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer Zhong, Zhihong; Hinoki, Tatsuya; Nozawa, Takashi Journal of Alloys and Compounds, Vol. 489, Issue 2 https://doi.org/10.1016/j.jallcom.2009.09.105	journal	January 2010
Effect of joining temperature on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer Zhong, Zhihong; Jung, Hun-chea; Hinoki, Tatsuya Journal of Materials Processing Technology, Vol. 210, Issue 13 https://doi.org/10.1016/j.jmatprotec.2010.06.012	journal	October 2010
Microstructure, properties, and formation mechanisms of tungsten/steel hot isostatic pressing diffusion bonding joint utilizing a Ni-Si-B interlayer Wang, Yue; Chen, Shuai; Yang, Jian Journal of Materials Processing Technology, Vol. 299 https://doi.org/10.1016/j.jmatprotec.2021.117303	journal	January 2022
Thermal fatigue response of W-EUROFER brazed joints by the application of High Heat Flux loads Izaguirre, I.; Loewenhoff, T.; de Prado, J. Journal of Materials Processing Technology, Vol. 319 https://doi.org/10.1016/j.jmatprotec.2023.118056	journal	October 2023
A novel design of transitional layer structure between reduced activation ferritic martensitic steels and tungsten for plasma facing materials Gräning, Tim; Tan, Lizhen; Robin, Ishtiaque Journal of Materials Research and Technology, Vol. 24 https://doi.org/10.1016/j.jmrt.2023.04.019	journal	May 2023
Synchrotron based investigation of anisotropy and microstructure of wire arc additive manufactured Grade 91 steel Robin, Ishtiaque K.; Sprouster, David J.; Sridharan, Niyanth Journal of Materials Research and Technology, Vol. 29 https://doi.org/10.1016/j.jmrt.2024.02.230	journal	March 2024
Additive manufacturing of copper-stainless steel hybrid components using laser-aided directed energy deposition Zhang, Xinchang; Pan, Tan; Chen, Yitao Journal of Materials Science & Technology, Vol. 80 https://doi.org/10.1016/j.jmst.2020.11.048	journal	July 2021
Dissimilar laser welding of CrMnFeCoNi high entropy alloy and 316LN stainless steel for cryogenic application Xin, Jijun; Wang, Wei; Yang, Xiao Journal of Materials Science & Technology, Vol. 163 https://doi.org/10.1016/j.jmst.2023.04.030	journal	November 2023
Materials design data for reduced activation martensitic steel type EUROFER Tavassoli, A. -A. F.; Alamo, A.; Bedel, L. Journal of Nuclear Materials, Vol. 329-333 https://doi.org/10.1016/j.jnucmat.2004.04.020	journal	August 2004
Development of rapidly quenched brazing foils to join tungsten alloys with ferritic steel Kalin, B. A.; Fedotov, V. T.; Sevrjukov, O. N. Journal of Nuclear Materials, Vol. 329-333 https://doi.org/10.1016/j.jnucmat.2004.04.170	journal	August 2004
Mechanical characterization and modeling of brazed EUROFER-tungsten-joints Chehtov, T.; Aktaa, J.; Kraft, O. Journal of Nuclear Materials, Vol. 367-370 https://doi.org/10.1016/j.jnucmat.2007.03.224	journal	August 2007
Characterization of thick plasma spray tungsten coating on ferritic/martensitic steel F82H for high heat flux armor Yahiro, Y.; Mitsuhara, M.; Tokunakga, K. Journal of Nuclear Materials, Vol. 386-388 https://doi.org/10.1016/j.jnucmat.2008.12.219	journal	April 2009
Tungsten as material for plasma-facing components in fusion devices Philipps, V. Journal of Nuclear Materials, Vol. 415, Issue 1 https://doi.org/10.1016/j.jnucmat.2011.01.110	journal	August 2011
Development of high-grade VPS-tungsten coatings on F82H reduced activation steel Tokunaga, Tomonori; Watanabe, Hideo; Yoshida, Naoaki Journal of Nuclear Materials, Vol. 442, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2012.11.004	journal	November 2013
Thermomechanical analysis of diffusion-bonded tungsten/EUROFER97 with a vanadium interlayer Basuki, Widodo Widjaja; Dahm, Ralf; Aktaa, Jarir Journal of Nuclear Materials, Vol. 455, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.09.007	journal	December 2014
Process optimization for diffusion bonding of tungsten with EUROFER97 using a vanadium interlayer Basuki, Widodo Widjaja; Aktaa, Jarir Journal of Nuclear Materials, Vol. 459 https://doi.org/10.1016/j.jnucmat.2015.01.033	journal	April 2015
Investigation on W/Fe diffusion bonding using Ti foil and Ti powder interlayer by SPS Chen, Hong-Yu; Luo, Lai-Ma; Zhang, Jun Journal of Nuclear Materials, Vol. 467 https://doi.org/10.1016/j.jnucmat.2015.10.045	journal	December 2015
Development of castable nanostructured alloys as a new generation RAFM steels Tan, L.; Katoh, Y.; Snead, L. L. Journal of Nuclear Materials, Vol. 511 https://doi.org/10.1016/j.jnucmat.2018.05.024	journal	December 2018
Ferritic-martensitic steels for fission and fusion applications Cabet, C.; Dalle, F.; Gaganidze, E. Journal of Nuclear Materials, Vol. 523 https://doi.org/10.1016/j.jnucmat.2019.05.058	journal	September 2019
Effects of carbonitrides and carbides on microstructure and properties of castable nanostructured alloys Tan, L.; Graening, T.; Hu, X. Journal of Nuclear Materials, Vol. 540 https://doi.org/10.1016/j.jnucmat.2020.152376	journal	November 2020
Thermomechanical characterisation of W-Eurofer 97 brazed joints Tejado, E.; de Prado, J.; Tarancón, S. Journal of Nuclear Materials, Vol. 542 https://doi.org/10.1016/j.jnucmat.2020.152504	journal	December 2020
The effects of fusion reactor thermal transients on the microstructure of Eurofer-97 steel Kumar, D.; Hargreaves, J.; Bharj, A. Journal of Nuclear Materials, Vol. 554 https://doi.org/10.1016/j.jnucmat.2021.153084	journal	October 2021
Microstructure and mechanical properties of diffusion bonded W/steel joint using V/Ni composite interlayer Liu, W. S.; Cai, Q. S.; Ma, Y. Z. Materials Characterization, Vol. 86 https://doi.org/10.1016/j.matchar.2013.10.013	journal	December 2013
Mechanical properties and quality of plasma sprayed, functionally graded tungsten/steel coatings after process upscaling Grammes, Thilo; Mishra, Ashwini Kumar; Battalov, Kamil Materials Chemistry and Physics, Vol. 311 https://doi.org/10.1016/j.matchemphys.2023.128530	journal	January 2024
Investigation on diffusion bonding of functionally graded WC–Co/Ni composite and stainless steel Feng, Keqin; Chen, Hongsheng; Xiong, Ji Materials & Design (1980-2015), Vol. 46 https://doi.org/10.1016/j.matdes.2012.11.006	journal	April 2013
Microstructural and micromechanical assessment of aged ultra-fast sintered functionally graded iron/tungsten composites Heuer, S.; Li, B. -S.; Armstrong, D. E. J. Materials & Design, Vol. 191 https://doi.org/10.1016/j.matdes.2020.108652	journal	June 2020
Growth of intermetallic layer in multi-laminated Ti/Al diffusion couples Xu, L.; Cui, Y. Y.; Hao, Y. L. Materials Science and Engineering: A, Vol. 435-436 https://doi.org/10.1016/j.msea.2006.07.077	journal	November 2006
Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer Zhong, Zhihong; Hinoki, Tatsuya; Kohyama, Akira Materials Science and Engineering: A, Vol. 518, Issue 1-2 https://doi.org/10.1016/j.msea.2009.04.043	journal	August 2009
Impact toughness of commercial and model FeCrAl alloys Sun, Zhiqian; Yamamoto, Yukinori; Chen, Xiang Materials Science and Engineering: A, Vol. 734 https://doi.org/10.1016/j.msea.2018.07.074	journal	September 2018
Microstructure and deformation behaviour of austenitic low-density steels: The defining role of B2 intermetallic phase Mishra, Bidyapati; Sarkar, R.; Singh, Vajinder Materialia, Vol. 20 https://doi.org/10.1016/j.mtla.2021.101198	journal	December 2021
Recrystallization behavior of hot-rolled pure tungsten and its alloy plates during high-temperature annealing Tsuchida, Kohei; Miyazawa, Takeshi; Hasegawa, Akira Nuclear Materials and Energy, Vol. 15 https://doi.org/10.1016/j.nme.2018.04.004	journal	May 2018
Enhanced TiAl/Ti3SiC2 diffusion bonding by introducing amorphous intergranular films in Ti3SiC2 through Al doping Wang, Qi; Chen, Guo-qing; Wang, Kang Scripta Materialia, Vol. 178 https://doi.org/10.1016/j.scriptamat.2019.12.031	journal	March 2020
Iron–tungsten alloys electrodeposited under direct current from citrate–ammonia plating baths Tsyntsaru, N.; Bobanova, J.; Ye, X. Surface and Coatings Technology, Vol. 203, Issue 20-21 https://doi.org/10.1016/j.surfcoat.2009.03.041	journal	July 2009
Development of advanced stellarator with identical permanent magnet blocks Lu, Zhiyuan; Xu, Guosheng; Chen, Dehong Cell Reports Physical Science, Vol. 3, Issue 1 https://doi.org/10.1016/j.xcrp.2021.100709	journal	January 2022
EBSD Image Quality Mapping Wright, Stuart I.; Nowell, Matthew M. Microscopy and Microanalysis, Vol. 12, Issue 01 https://doi.org/10.1017/S1431927606060090	journal	December 2005
NIH Image to ImageJ: 25 years of image analysis Schneider, Caroline A.; Rasband, Wayne S.; Eliceiri, Kevin W. Nature Methods, Vol. 9, Issue 7 https://doi.org/10.1038/nmeth.2089	journal	June 2012
Microstructure of aluminium oxide formed on ferritic FeCrAl alloy after high-temperature steam oxidation Falaakh, Dayu Fajrul; Kim, Sungyu; Bahn, Chi Bum Materials at High Temperatures, Vol. 37, Issue 3 https://doi.org/10.1080/09603409.2020.1742526	journal	March 2020
Materials for DEMO and reactor applications—boundary conditions and new concepts Coenen, J. W.; Antusch, S.; Aumann, M. Physica Scripta, Vol. T167 https://doi.org/10.1088/0031-8949/2016/T167/014002	journal	December 2015
Overview of challenges and developments in joining tungsten and steel for future fusion reactors Heuer, S.; Coenen, J. W.; Pintsuk, G. Physica Scripta, Vol. T171 https://doi.org/10.1088/1402-4896/ab47a4	journal	January 2020
Development of advanced high heat flux and plasma-facing materials Linsmeier, Ch.; Rieth, M.; Aktaa, J. Nuclear Fusion, Vol. 57, Issue 9 https://doi.org/10.1088/1741-4326/aa6f71	journal	June 2017
Evolution of interfacial structure of the joints between a tungsten-copper composite and austenitic stainless steel Huang, Youting; Zha, Yuanfei; Zhou, Xiaolong Materials Research Express, Vol. 8, Issue 1 https://doi.org/10.1088/2053-1591/abd731	journal	January 2021
Investigation of tungsten/MA956 steel diffusion bonding with an Nb/Ni composite interlayer Chen, Boyan; Li, Xianfen; Cui, Hanlin International Journal of Modern Physics B, Vol. 34, Issue 12 https://doi.org/10.1142/S0217979220501234	journal	May 2020
Welding and weldability of candidate ferritic alloys for future advanced ultrasupercritical fossil power plants David, S. A.; Siefert, J. A.; Feng, Z. Science and Technology of Welding and Joining, Vol. 18, Issue 8 https://doi.org/10.1179/1362171813Y.0000000152	journal	November 2013
Overview of processing technologies for tungsten-steel composites and FGMs for fusion applications Matějíček, Jiří; Nevrlá, Barbara; Vilémová, Monika Nukleonika, Vol. 60, Issue 2 https://doi.org/10.1515/nuka-2015-0049	journal	June 2015
Evaluation of Feasibility of Tungsten/Oxide Dispersion Strengthened Steel Bonding with Vanadium Insert Noto, Hiroyuki; Kimura, Akihiko; Kurishita, Hiroaki MATERIALS TRANSACTIONS, Vol. 54, Issue 4 https://doi.org/10.2320/matertrans.MG201213	journal	January 2013
Diffusion Bonding of 9Cr Martensitic/Ferritic Heat-Resistant Steels with an Electrodeposited Ni Interlayer Gao, Yan; Wang, Zumin; Liu, Yongchang Metals, Vol. 8, Issue 12 https://doi.org/10.3390/met8121012	journal	December 2018

Similar Records

Deformation Microstructure of a Reduced-Activation Ferritic/Martensitic Steel Irradiated in HFIR

Journal Article · Mon Sep 15 00:00:00 EDT 2003 · Fusion Science and Technology · OSTI ID:20849563

Related Subjects

36 MATERIALS SCIENCE
Diffusion kinetics
Fusion plasma facing materials
SPS
Solid state diffusion bond
W-steel transition layer bond

Microstructure and thermal stability of a structurally graded tungsten and reduced activation ferritic/martensitic steel joint

Citation Formats

References (64)

Similar Records

Related Subjects