Enhancing the fatigue resistance of high and medium entropy alloys by manufacturing-driven microstructural developments

Kim, You Sub; Luo, Mao-Yuan; Yu, Dunji; An, Ke; Chen, Yan; Oh, In-Hwan; Shin, Eunjoo; Woo, Wanchuck; Chae, Hobyung; Na, Young-Sang; Liaw, Peter K.; Jain, Jayant; Han, Jun Hyun; Huang, E-Wen; Lee, Soo Yeol

doi:10.1016/j.addma.2024.104332

Enhancing the fatigue resistance of high and medium entropy alloys by manufacturing-driven microstructural developments

Journal Article · Mon Jul 01 00:00:00 EDT 2024 · Additive Manufacturing

DOI:https://doi.org/10.1016/j.addma.2024.104332· OSTI ID:2429766

Kim, You Sub; Luo, Mao-Yuan; Yu, Dunji; ; Chen, Yan; ; ; Woo, Wanchuck; Chae, Hobyung; ; Liaw, Peter K.; Jain, Jayant; Han, Jun Hyun; ; Lee, Soo Yeol

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE

OSTI ID:: 2429766

Journal Information:: Additive Manufacturing, Journal Name: Additive Manufacturing Journal Issue: C Vol. 91; ISSN 2214-8604

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (82)

Recent Advances on High‐Entropy Alloys for 3D Printing Han, Changjun; Fang, Qihong; Shi, Yusheng Advanced Materials, Vol. 32, Issue 26 https://doi.org/10.1002/adma.201903855	journal	May 2020
Nanoprecipitate‐Strengthened High‐Entropy Alloys Liu, Liyuan; Zhang, Yang; Han, Jihong Advanced Science, Vol. 8, Issue 23 https://doi.org/10.1002/advs.202100870	journal	October 2021
Fatigue behavior of high-entropy alloys: A review Chen, PeiYong; Lee, Chanho; Wang, Shao-Yu Science China Technological Sciences, Vol. 61, Issue 2 https://doi.org/10.1007/s11431-017-9137-4	journal	November 2017
First In Situ Lattice Strains Measurements Under Load at VULCAN An, Ke; Skorpenske, Harley D.; Stoica, Alexandru D. Metallurgical and Materials Transactions A, Vol. 42, Issue 1 https://doi.org/10.1007/s11661-010-0495-9	journal	October 2010
High-Resolution EBSD Study of Adiabatic Shear Band and Neighboring Grains After Dynamic Impact Loading of Mn-Steel Used in Vehicle Structure Eskandari, M.; Mohtadi-Bonab, M. A.; Zarei-Hanzaki, A. Journal of Materials Engineering and Performance, Vol. 25, Issue 4 https://doi.org/10.1007/s11665-016-1923-9	journal	February 2016
Low Cycle Fatigue Behavior and Failure Mechanism of Wire Arc Additive Manufacturing 16MND5 Bainitic Steel Mu, Sida; Li, Yajing; Song, Danrong Journal of Materials Engineering and Performance, Vol. 30, Issue 7 https://doi.org/10.1007/s11665-021-05554-1	journal	March 2021
Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing Patlan, V.; Vinogradov, A.; Higashi, K. Materials Science and Engineering: A, Vol. 300, Issue 1-2 https://doi.org/10.1016/S0921-5093(00)01682-8	journal	February 2001
A study on fatigue crack growth behavior subjected to a single tensile overload Lee, S. Y.; Liaw, P. K.; Choo, H. Acta Materialia, Vol. 59, Issue 2 https://doi.org/10.1016/j.actamat.2010.09.049	journal	January 2011
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys Tsai, K. -Y.; Tsai, M. -H.; Yeh, J. -W. Acta Materialia, Vol. 61, Issue 13 https://doi.org/10.1016/j.actamat.2013.04.058	journal	August 2013
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy Otto, F.; Dlouhý, A.; Somsen, Ch. Acta Materialia, Vol. 61, Issue 15 https://doi.org/10.1016/j.actamat.2013.06.018	journal	September 2013
Deformation behavior of solid-solution-strengthened Mg–9 wt.% Al alloy: In situ neutron diffraction and elastic–viscoplastic self-consistent modeling Lee, S. Y.; Wang, H.; Gharghouri, M. A. Acta Materialia, Vol. 73 https://doi.org/10.1016/j.actamat.2014.03.038	journal	July 2014
Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction Wu, Wei; Liaw, Peter K.; An, Ke Acta Materialia, Vol. 85 https://doi.org/10.1016/j.actamat.2014.11.030	journal	February 2015
Additive manufacturing of metals Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric Acta Materialia, Vol. 117 https://doi.org/10.1016/j.actamat.2016.07.019	journal	September 2016
A remarkable improvement of low-cycle fatigue resistance of high-Mn austenitic TWIP alloys with similar tensile properties: Importance of slip mode Shao, C. W.; Zhang, P.; Liu, R. Acta Materialia, Vol. 118 https://doi.org/10.1016/j.actamat.2016.07.034	journal	October 2016
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy Laplanche, G.; Kostka, A.; Horst, O. M. Acta Materialia, Vol. 118 https://doi.org/10.1016/j.actamat.2016.07.038	journal	October 2016
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi Laplanche, G.; Kostka, A.; Reinhart, C. Acta Materialia, Vol. 128 https://doi.org/10.1016/j.actamat.2017.02.036	journal	April 2017
Stacking fault energies of face-centered cubic concentrated solid solution alloys Zhao, Shijun; Stocks, G. Malcolm; Zhang, Yanwen Acta Materialia, Vol. 134 https://doi.org/10.1016/j.actamat.2017.05.001	journal	August 2017
Critical stress for twinning nucleation in CrCoNi-based medium and high entropy alloys Huang, He; Li, Xiaoqing; Dong, Zhihua Acta Materialia, Vol. 149 https://doi.org/10.1016/j.actamat.2018.02.037	journal	May 2018
Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction Wang, Yiqiang; Liu, Bin; Yan, Kun Acta Materialia, Vol. 154 https://doi.org/10.1016/j.actamat.2018.05.013	journal	August 2018
Lattice distortion in a strong and ductile refractory high-entropy alloy Lee, Chanho; Song, Gian; Gao, Michael C. Acta Materialia, Vol. 160 https://doi.org/10.1016/j.actamat.2018.08.053	journal	November 2018
Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure Wu, S. W.; Wang, G.; Wang, Q. Acta Materialia, Vol. 165 https://doi.org/10.1016/j.actamat.2018.12.012	journal	February 2019
On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure Picak, S.; Wegener, T.; Sajadifar, S. V. Acta Materialia, Vol. 205 https://doi.org/10.1016/j.actamat.2020.116540	journal	February 2021
Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading Lu, Kaiju; Chauhan, Ankur; Tirunilai, Aditya Srinivasan Acta Materialia, Vol. 215 https://doi.org/10.1016/j.actamat.2021.117089	journal	August 2021
Fracture and fatigue in additively manufactured metals Becker, Thorsten Hermann; Kumar, Punit; Ramamurty, Upadrasta Acta Materialia, Vol. 219 https://doi.org/10.1016/j.actamat.2021.117240	journal	October 2021
Towards stacking fault energy engineering in FCC high entropy alloys Khan, Tasneem Z.; Kirk, Tanner; Vazquez, Guillermo Acta Materialia, Vol. 224 https://doi.org/10.1016/j.actamat.2021.117472	journal	February 2022
Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys Woo, W.; Kim, Y. S.; Chae, H. B. Acta Materialia, Vol. 246 https://doi.org/10.1016/j.actamat.2023.118699	journal	March 2023
A deformation twin mediated sliding-opening zig-zag fracture mechanism in multi-principal element alloys Zhu, Qi; Li, Zhi; Wei, Siyuan Acta Materialia, Vol. 275 https://doi.org/10.1016/j.actamat.2024.120073	journal	August 2024
Effect of grain size on fatigue behavior of Type 301LN stainless steel Järvenpää, Antti; Karjalainen, L. Pentti; Jaskari, Matias International Journal of Fatigue, Vol. 65 https://doi.org/10.1016/j.ijfatigue.2013.05.012	journal	August 2014
Low cycle fatigue behaviour of a precipitation hardened Cu-Ni-Si alloy Delbove, Maxime; Vogt, Jean-Bernard; Bouquerel, Jérémie International Journal of Fatigue, Vol. 92 https://doi.org/10.1016/j.ijfatigue.2016.07.019	journal	November 2016
Additive manufacturing of fatigue resistant materials: Challenges and opportunities Yadollahi, Aref; Shamsaei, Nima International Journal of Fatigue, Vol. 98 https://doi.org/10.1016/j.ijfatigue.2017.01.001	journal	May 2017
Microstructures and mechanical properties of C-containing FeCoCrNi high-entropy alloy fabricated by selective laser melting Zhou, Rui; Liu, Yong; Zhou, Chengshang Intermetallics, Vol. 94 https://doi.org/10.1016/j.intermet.2018.01.002	journal	March 2018
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy Bhattacharjee, P. P.; Sathiaraj, G. D.; Zaid, M. Journal of Alloys and Compounds, Vol. 587 https://doi.org/10.1016/j.jallcom.2013.10.237	journal	February 2014
Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property Li, Ruidi; Niu, Pengda; Yuan, Tiechui Journal of Alloys and Compounds, Vol. 746 https://doi.org/10.1016/j.jallcom.2018.02.298	journal	May 2018
Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property Tong, Zhaopeng; Ren, Xudong; Jiao, Jiafei Journal of Alloys and Compounds, Vol. 785 https://doi.org/10.1016/j.jallcom.2019.01.213	journal	May 2019
Post-processing of additively manufactured high-entropy alloys - A review Khodashenas, Hasti; Mirzadeh, Hamed Journal of Materials Research and Technology, Vol. 21 https://doi.org/10.1016/j.jmrt.2022.11.027	journal	November 2022
Effect of grain size on fatigue cracking at twin boundaries in a CoCrFeMnNi high-entropy alloy Wang, A. G.; An, X. H.; Gu, J. Journal of Materials Science & Technology, Vol. 39 https://doi.org/10.1016/j.jmst.2019.09.010	journal	February 2020
Can experiment determine the stacking fault energy of metastable alloys? Sun, Xun; Lu, Song; Xie, Ruiwen Materials & Design, Vol. 199 https://doi.org/10.1016/j.matdes.2020.109396	journal	February 2021
Additive manufactured high entropy alloys: A review of the microstructure and properties Zhang, Wei; Chabok, Ali; Kooi, Bart J. Materials & Design, Vol. 220 https://doi.org/10.1016/j.matdes.2022.110875 110875	journal	August 2022
First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials Fujieda, Tadashi; Shiratori, Hiroshi; Kuwabara, Kosuke Materials Letters, Vol. 159 https://doi.org/10.1016/j.matlet.2015.06.046	journal	November 2015
Deformation twinning in difficult-to-work alloys during severe plastic deformation Karaman, I.; Yapici, G. G.; Chumlyakov, Y. I. Materials Science and Engineering: A, Vol. 410-411 https://doi.org/10.1016/j.msea.2005.08.021	journal	November 2005
The strain-controlled fatigue behavior and modeling of Haynes® HASTELLOY® C-2000® superalloy McDaniels, R. L.; Chen, L.; Steward, R. Materials Science and Engineering: A, Vol. 528, Issue 12 https://doi.org/10.1016/j.msea.2010.10.024	journal	May 2011
Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel Guo, Pengcheng; Qian, Lihe; Meng, Jiangying Materials Science and Engineering: A, Vol. 584 https://doi.org/10.1016/j.msea.2013.07.020	journal	November 2013
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel Yadollahi, Aref; Shamsaei, Nima; Thompson, Scott M. Materials Science and Engineering: A, Vol. 644 https://doi.org/10.1016/j.msea.2015.07.056	journal	September 2015
A study of the back stress and the friction stress behaviors of Ti-6Al-4V alloy during low cycle fatigue at room temperature Xu, Haifeng; Ye, Duyi; Mei, Linbo Materials Science and Engineering: A, Vol. 700 https://doi.org/10.1016/j.msea.2017.06.051	journal	July 2017
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing Pham, M. S.; Dovgyy, B.; Hooper, P. A. Materials Science and Engineering: A, Vol. 704 https://doi.org/10.1016/j.msea.2017.07.082	journal	September 2017
Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing Yin, Y. J.; Sun, J. Q.; Guo, J. Materials Science and Engineering: A, Vol. 744 https://doi.org/10.1016/j.msea.2018.12.092	journal	January 2019
Strain controlled isothermal low cycle fatigue life, deformation and fracture characteristics of Superni 263 superalloy Jadav, J.; Rajulapati, K. V.; Rao, K. Bhanu Sankara Materials Science and Engineering: A, Vol. 760 https://doi.org/10.1016/j.msea.2019.05.119	journal	July 2019
Plastic anisotropy and deformation-induced phase transformation of additive manufactured stainless steel Chae, Hobyung; Huang, E-Wen; Jain, Jayant Materials Science and Engineering: A, Vol. 762 https://doi.org/10.1016/j.msea.2019.138065	journal	August 2019
Low-cycle fatigue properties of CoCrFeMnNi high-entropy alloy compared with its conventional counterparts Shams, S. A. A.; Jang, G.; Won, J. W. Materials Science and Engineering: A, Vol. 792 https://doi.org/10.1016/j.msea.2020.139661	journal	August 2020
Effect of grain size on the low-cycle fatigue behavior of carbon-containing high-entropy alloys Shams, Seyed Amir Arsalan; Kim, Geonhyeong; Won, Jong Woo Materials Science and Engineering: A, Vol. 810 https://doi.org/10.1016/j.msea.2021.140985	journal	April 2021
Multiple deformation scheme in direct energy deposited CoCrNi medium entropy alloy at 210K Kim, You Sub; Chae, Hobyung; Woo, Wanchuck Materials Science and Engineering: A, Vol. 828 https://doi.org/10.1016/j.msea.2021.142059	journal	November 2021
Tailoring the strengthening mechanisms of high-entropy alloys toward excellent strength-ductility synergy by metalloid silicon alloying: A review Sohrabi, Mohammad Javad; Kalhor, Alireza; Mirzadeh, Hamed Progress in Materials Science, Vol. 144 https://doi.org/10.1016/j.pmatsci.2024.101295	journal	August 2024
Microstructural parameters from X-ray diffraction peak broadening Ungár, T. Scripta Materialia, Vol. 51, Issue 8 https://doi.org/10.1016/j.scriptamat.2004.05.007	journal	October 2004
Unexpected cyclic stress-strain response of dual-phase high-entropy alloys induced by partial reversibility of deformation Niendorf, Thomas; Wegener, Thomas; Li, Zhiming Scripta Materialia, Vol. 143 https://doi.org/10.1016/j.scriptamat.2017.09.013	journal	January 2018
In-situ neutron diffraction investigation on twinning/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel Xie, Q.; Chen, Y.; Yang, P. Scripta Materialia, Vol. 150 https://doi.org/10.1016/j.scriptamat.2018.03.017	journal	June 2018
Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting Zhu, Z. G.; Nguyen, Q. B.; Ng, F. L. Scripta Materialia, Vol. 154 https://doi.org/10.1016/j.scriptamat.2018.05.015	journal	September 2018
Deformation of CoCrFeNi high entropy alloy at large strain Wang, Bing; He, Haiyan; Naeem, Muhammad Scripta Materialia, Vol. 155 https://doi.org/10.1016/j.scriptamat.2018.06.013	journal	October 2018
A comparison study of local lattice distortion in Ni 80 Pd 20 binary alloy and FeCoNiCrPd high-entropy alloy Tong, Y.; Zhao, S.; Jin, K. Scripta Materialia, Vol. 156 https://doi.org/10.1016/j.scriptamat.2018.07.002	journal	November 2018
Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy Shukla, Shivakant; Wang, Tianhao; Cotton, Shomari Scripta Materialia, Vol. 156 https://doi.org/10.1016/j.scriptamat.2018.07.022	journal	November 2018
Cocktail effects in understanding the stability and properties of face-centered-cubic high-entropy alloys at ambient and cryogenic temperatures Cao, B. X.; Wang, C.; Yang, T. Scripta Materialia, Vol. 187 https://doi.org/10.1016/j.scriptamat.2020.06.008	journal	October 2020
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi Lu, Kaiju; Chauhan, Ankur; Walter, Mario Scripta Materialia, Vol. 194 https://doi.org/10.1016/j.scriptamat.2020.113667	journal	March 2021
Grain-size-dependent microstructure effects on cyclic deformation mechanisms in CoCrFeMnNi high-entropy-alloys Luo, Mao-Yuan; Lam, Tu-Ngoc; Wang, Pei-Te Scripta Materialia, Vol. 210 https://doi.org/10.1016/j.scriptamat.2021.114459	journal	March 2022
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off Li, Zhiming; Pradeep, Konda Gokuldoss; Deng, Yun Nature, Vol. 534, Issue 7606 https://doi.org/10.1038/nature17981	journal	May 2016
Additively manufactured hierarchical stainless steels with high strength and ductility Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T. Nature Materials, Vol. 17, Issue 1 https://doi.org/10.1038/nmat5021	journal	October 2017
High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys Liang, Yao-Jian; Wang, Linjing; Wen, Yuren Nature Communications, Vol. 9, Issue 1 https://doi.org/10.1038/s41467-018-06600-8	journal	October 2018
Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy Feng, Rui; Rao, You; Liu, Chuhao Nature Communications, Vol. 12, Issue 1 https://doi.org/10.1038/s41467-021-23689-6	journal	June 2021
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes Lei, Zhifeng; Liu, Xiongjun; Wu, Yuan Nature, Vol. 563, Issue 7732 https://doi.org/10.1038/s41586-018-0685-y	journal	November 2018
Short-range order and its impact on the CrCoNi medium-entropy alloy Zhang, Ruopeng; Zhao, Shiteng; Ding, Jun Nature, Vol. 581, Issue 7808 https://doi.org/10.1038/s41586-020-2275-z	journal	May 2020
Direct observation of chemical short-range order in a medium-entropy alloy Chen, Xuefei; Wang, Qi; Cheng, Zhiying Nature, Vol. 592, Issue 7856 https://doi.org/10.1038/s41586-021-03428-z	journal	April 2021
Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing Ren, Jie; Zhang, Yin; Zhao, Dexin Nature, Vol. 608, Issue 7921 https://doi.org/10.1038/s41586-022-04914-8	journal	August 2022
High fatigue resistance in a titanium alloy via near-void-free 3D printing Qu, Zhan; Zhang, Zhenjun; Liu, Rui Nature, Vol. 626, Issue 8001 https://doi.org/10.1038/s41586-024-07048-1	journal	February 2024
Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy Okamoto, Norihiko L.; Fujimoto, Shu; Kambara, Yuki Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep35863	journal	October 2016
Stacking faults and twin boundaries in fcc crystals determined by x-ray diffraction profile analysis Balogh, Levente; Ribárik, Gábor; Ungár, Tamás Journal of Applied Physics, Vol. 100, Issue 2 https://doi.org/10.1063/1.2216195	journal	July 2006
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys Ding, Jun; Yu, Qin; Asta, Mark Proceedings of the National Academy of Sciences, Vol. 115, Issue 36 https://doi.org/10.1073/pnas.1808660115	journal	August 2018
Predicting Ductile Crack Initiation of Steel Bridge Structures Due to Extremely Low-Cycle Fatigue Using Local and Non-Local Models Kang, Lan; Ge, Hanbin Journal of Earthquake Engineering, Vol. 17, Issue 3 https://doi.org/10.1080/13632469.2012.746211	journal	November 2012
MWP-fit : a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions Ribárik, G.; Ungár, T.; Gubicza, J. Journal of Applied Crystallography, Vol. 34, Issue 5 https://doi.org/10.1107/S0021889801011451	journal	September 2001
A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength Fu, Zhiqiang; Jiang, Lin; Wardini, Jenna L. Science Advances, Vol. 4, Issue 10 https://doi.org/10.1126/sciadv.aat8712	journal	October 2018
A fracture-resistant high-entropy alloy for cryogenic applications Gludovatz, B.; Hohenwarter, A.; Catoor, D. Science, Vol. 345, Issue 6201 https://doi.org/10.1126/science.1254581	journal	September 2014
Segregation of Solute Atoms to Stacking Faults Suzuki, Hideji Journal of the Physical Society of Japan, Vol. 17, Issue 2 https://doi.org/10.1143/JPSJ.17.322	journal	February 1962
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility Leuders, Stefan; Lieneke, Tobias; Lammers, Stefan Journal of Materials Research, Vol. 29, Issue 17 https://doi.org/10.1557/jmr.2014.157	journal	July 2014
Effect of Grain Size on Fatigue Behavior in AZ61 Mg Alloys Fabricated by MDFing Uematsu, Yoshihiko; Kakiuchi, Toshifumi; Miura, Hiromi MATERIALS TRANSACTIONS, Vol. 57, Issue 9 https://doi.org/10.2320/matertrans.MH201508	journal	January 2016
State-of-the-Art Diffusion Studies in the High Entropy Alloys Dąbrowa, Juliusz; Danielewski, Marek Metals, Vol. 10, Issue 3 https://doi.org/10.3390/met10030347	journal	March 2020

Similar Records

Engineering heterogeneous microstructures in additively manufactured high entropy alloys for high st

Journal Article · Mon Aug 01 00:00:00 EDT 2022 · Mat. Sci. Eng. A · OSTI ID:1876072

Engineering heterogeneous microstructures in additively manufactured high entropy alloys for high st

Journal Article · Mon Aug 01 00:00:00 EDT 2022 · Mat. Sci. Eng. A · OSTI ID:1879749

Enhancing the fatigue resistance of high and medium entropy alloys by manufacturing-driven microstructural developments

Citation Formats

References (82)

Similar Records

Related Subjects