Isogeometric large-eddy simulations of turbulent particle-laden flows

Zhu, Qiming; Zhu, Minjiang; Yan, Jinhui

doi:10.1142/s0218202522500609

Isogeometric large-eddy simulations of turbulent particle-laden flows

Journal Article · Tue Nov 01 00:00:00 EDT 2022 · Mathematical Models and Methods in Applied Sciences

DOI:https://doi.org/10.1142/s0218202522500609· OSTI ID:2425003

Zhu, Qiming ^[1]; Zhu, Minjiang ^[1]; Yan, Jinhui ^[1]

Department of Civil and Environmental Engineering, University of Illinois Urbana-Champaign, 205 N Mathews Ave, Urbana, IL 61801, USA

In recent years, isogeometric analysis (IGA) has attracted significant attention from the computational mechanics community due to its ability to integrate design and analysis. Besides, IGA is also a higher-order discretization technique for solving partial differential equations, showing high approximation capability per degree of freedom. In this paper, we extend the application realm of IGA to particle-laden flows based on Eulerian–Eulerian description that couples Navier–Stokes equations with a density transport equation through a Boussinesq approximation. The coupled systems are solved by using quadratic non-uniform rational B-spline (NURBS) functions and a recently developed residual-based variational multiscale (VMS) formulation, which introduces coupling between the fine velocity scales and density equation residuals. We deploy the proposed approach to perform large-eddy simulations (LES) of dilute particle-laden flows over a flat surface at Reynolds number = 10,000. We compare the simulation results against direct numerical simulation (DNS) results from the literature. We find that combining VMS and IGA, the proposed approach enables accurate prediction of a wide range of flow/particle statistics with a relatively lower mesh resolution.

Research Organization:: FOA Grant 0002234

Sponsoring Organization:: USDOE

OSTI ID:: 2425003

Journal Information:: Mathematical Models and Methods in Applied Sciences, Journal Name: Mathematical Models and Methods in Applied Sciences Journal Issue: 12 Vol. 32; ISSN 0218-2025

Publisher:: World Scientific

Country of Publication:: United States

Language:: English

References (114)

A new formulation for air-blast fluid–structure interaction using an immersed approach: part II—coupling of IGA and meshfree discretizations Bazilevs, Y.; Moutsanidis, G.; Bueno, J. Computational Mechanics, Vol. 60, Issue 1 https://doi.org/10.1007/s00466-017-1395-2	journal	March 2017
Computational Cardiovascular Flow Analysis with the Variational Multiscale Methods Takizawa, Kenji; Bazilevs, Yuri; E. Tezduyar, Tayfun Journal of Advanced Engineering and Computation, Vol. 3, Issue 2 https://doi.org/10.25073/jaec.201932.245	journal	June 2019
Stabilized methods for high-speed compressible flows: toward hypersonic simulations Codoni, David; Moutsanidis, Georgios; Hsu, Ming-Chen Computational Mechanics, Vol. 67, Issue 3 https://doi.org/10.1007/s00466-020-01963-6	journal	January 2021
Computational engineering analysis with the new-generation space–time methods Takizawa, Kenji Computational Mechanics, Vol. 54, Issue 2 https://doi.org/10.1007/s00466-014-0999-z	journal	March 2014
Special methods for aerodynamic-moment calculations from parachute FSI modeling Takizawa, Kenji; Tezduyar, Tayfun E.; Boswell, Cody Computational Mechanics, Vol. 55, Issue 6 https://doi.org/10.1007/s00466-014-1074-5	journal	October 2014
On predicting particle-laden turbulent flows Elghobashi, S. Applied Scientific Research, Vol. 52, Issue 4 https://doi.org/10.1007/BF00936835	journal	June 1994
Space–time VMS computation of wind-turbine rotor and tower aerodynamics Takizawa, Kenji; Tezduyar, Tayfun E.; McIntyre, Spenser Computational Mechanics, Vol. 53, Issue 1 https://doi.org/10.1007/s00466-013-0888-x	journal	July 2013
Space–time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film Kuraishi, Takashi; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 64, Issue 6 https://doi.org/10.1007/s00466-019-01746-8	journal	July 2019
Patient-specific isogeometric fluid–structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device Bazilevs, Y.; Gohean, J. R.; Hughes, T. J. R. Computer Methods in Applied Mechanics and Engineering, Vol. 198, Issue 45-46 https://doi.org/10.1016/j.cma.2009.04.015	journal	September 2009
Variational multiscale modeling of Langmuir turbulent boundary layers in shallow water using Isogeometric Analysis Zhu, Qiming; Yan, Jinhui; Tejada-Martínez, Andrés E. Mechanics Research Communications, Vol. 108 https://doi.org/10.1016/j.mechrescom.2020.103570	journal	September 2020
Stochastic model for the hydrodynamic force in Euler–Lagrange simulations of particle-laden flows Lattanzi, Aaron M.; Tavanashad, Vahid; Subramaniam, Shankar Physical Review Fluids, Vol. 7, Issue 1 https://doi.org/10.1103/PhysRevFluids.7.014301	journal	January 2022
Eulerian-Eulerian modelling of particle-laden two-phase flow Kartushinsky, A.; Tisler, S.; Oliveira, J. L. G. Powder Technology, Vol. 301 https://doi.org/10.1016/j.powtec.2016.07.053	journal	November 2016
Space–Time Variational Multiscale Isogeometric Analysis of a tsunami-shelter vertical-axis wind turbine Otoguro, Yuto; Mochizuki, Hiroki; Takizawa, Kenji Computational Mechanics, Vol. 66, Issue 6 https://doi.org/10.1007/s00466-020-01910-5	journal	August 2020
Methods for 3D computation of fluid–object interactions in spatially periodic flows Johnson, Andrew; Tezduyar, Tayfun Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issue 24-25 https://doi.org/10.1016/S0045-7825(00)00389-3	journal	March 2001
A multi-element group preconditioned GMRES algorithm for nonsymmetric systems arising in finite element analysis Shakib, Farzin; Hughes, Thomas J. R.; Johan, Zdeněk Computer Methods in Applied Mechanics and Engineering, Vol. 75, Issue 1-3 https://doi.org/10.1016/0045-7825(89)90040-6	journal	October 1989
Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization Takizawa, Kenji; Tezduyar, Tayfun E.; Uchikawa, Hiroaki Computers & Fluids, Vol. 179 https://doi.org/10.1016/j.compfluid.2018.05.025	journal	January 2019
The bending strip method for isogeometric analysis of Kirchhoff–Love shell structures comprised of multiple patches Kiendl, J.; Bazilevs, Y.; Hsu, M. -C. Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issue 37-40 https://doi.org/10.1016/j.cma.2010.03.029	journal	August 2010
New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods Bazilevs, Yuri; Takizawa, Kenji; Tezduyar, Tayfun E. Mathematical Models and Methods in Applied Sciences, Vol. 25, Issue 12 https://doi.org/10.1142/S0218202515020029	journal	August 2015
Parallel finite element simulation of large ram-air parachutes Kalro, V.; Aliabadi, S.; Garrard, W. International Journal for Numerical Methods in Fluids, Vol. 24, Issue 12 https://doi.org/10.1002/(SICI)1097-0363(199706)24:12<1353::AID-FLD564>3.0.CO;2-6	journal	June 1997
GPU acceleration of Eulerian–Lagrangian particle-laden turbulent flow simulations Sweet, James; Richter, David H.; Thain, Douglas International Journal of Multiphase Flow, Vol. 99 https://doi.org/10.1016/j.ijmultiphaseflow.2017.11.010	journal	February 2018
Isogeometric rotation-free bending-stabilized cables: Statics, dynamics, bending strips and coupling with shells Raknes, S. B.; Deng, X.; Bazilevs, Y. Computer Methods in Applied Mechanics and Engineering, Vol. 263 https://doi.org/10.1016/j.cma.2013.05.005	journal	August 2013
3D Simulation of fluid-particle interactions with the number of particles reaching 100 Johnson, A. A.; Tezduyar, T. E. Computer Methods in Applied Mechanics and Engineering, Vol. 145, Issue 3-4 https://doi.org/10.1016/S0045-7825(96)01223-6	journal	June 1997
Fluid–structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation Hsu, Ming-Chen; Kamensky, David; Bazilevs, Yuri Computational Mechanics, Vol. 54, Issue 4 https://doi.org/10.1007/s00466-014-1059-4	journal	August 2014
Coupling of IGA and peridynamics for air-blast fluid-structure interaction using an immersed approach Behzadinasab, Masoud; Moutsanidis, Georgios; Trask, Nathaniel Forces in Mechanics, Vol. 4 https://doi.org/10.1016/j.finmec.2021.100045	journal	October 2021
NURBS-based isogeometric analysis for the computation of flows about rotating components Bazilevs, Y.; Hughes, T. J. R. Computational Mechanics, Vol. 43, Issue 1 https://doi.org/10.1007/s00466-008-0277-z	journal	April 2008
Hyperbolic phase field modeling of brittle fracture: Part II—immersed IGA–RKPM coupling for air-blast–structure interaction Moutsanidis, Georgios; Kamensky, David; Chen, J. S. Journal of the Mechanics and Physics of Solids, Vol. 121 https://doi.org/10.1016/j.jmps.2018.07.008	journal	December 2018
Isogeometric Fluid–structure Interaction Analysis with Applications to Arterial Blood Flow Bazilevs, Y.; Calo, V. M.; Zhang, Y. Computational Mechanics, Vol. 38, Issue 4-5 https://doi.org/10.1007/s00466-006-0084-3	journal	June 2006
Space–time VMS method for flow computations with slip interfaces (ST-SI) Takizawa, Kenji; Tezduyar, Tayfun E.; Mochizuki, Hiroki Mathematical Models and Methods in Applied Sciences, Vol. 25, Issue 12 https://doi.org/10.1142/S0218202515400126	journal	August 2015
Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations Brooks, Alexander N.; Hughes, Thomas J. R. Computer Methods in Applied Mechanics and Engineering, Vol. 32, Issue 1-3 https://doi.org/10.1016/0045-7825(82)90071-8	journal	September 1982
Ventricle-valve-aorta flow analysis with the Space–Time Isogeometric Discretization and Topology Change Terahara, Takuya; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 65, Issue 5 https://doi.org/10.1007/s00466-020-01822-4	journal	February 2020
Turbocharger turbine and exhaust manifold flow computation with the Space–Time Variational Multiscale Method and Isogeometric Analysis Otoguro, Yuto; Takizawa, Kenji; Tezduyar, Tayfun E. Computers & Fluids, Vol. 179 https://doi.org/10.1016/j.compfluid.2018.05.019	journal	January 2019
Space–time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle Otoguro, Yuto; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 64, Issue 5 https://doi.org/10.1007/s00466-019-01722-2	journal	May 2019
Computational free-surface fluid–structure interaction with application to floating offshore wind turbines Yan, J.; Korobenko, A.; Deng, X. Computers & Fluids, Vol. 141 https://doi.org/10.1016/j.compfluid.2016.03.008	journal	December 2016
Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method: I. Computational framework Kuraishi, Takashi; Zhang, Fulin; Takizawa, Kenji Computational Mechanics, Vol. 68, Issue 1 https://doi.org/10.1007/s00466-021-02022-4	journal	May 2021
Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows van Opstal, T. M.; Yan, J.; Coley, C. Computer Methods in Applied Mechanics and Engineering, Vol. 316 https://doi.org/10.1016/j.cma.2016.10.015	journal	April 2017
Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines Yan, J.; Deng, X.; Korobenko, A. Computers & Fluids, Vol. 158 https://doi.org/10.1016/j.compfluid.2016.06.016	journal	November 2017
Isogeometric fluid–structure interaction analysis with emphasis on non-matching discretizations, and with application to wind turbines Bazilevs, Y.; Hsu, M. -C.; Scott, M. A. Computer Methods in Applied Mechanics and Engineering, Vol. 249-252 https://doi.org/10.1016/j.cma.2012.03.028	journal	December 2012
Isogeometric analysis using T-splines Bazilevs, Y.; Calo, V. M.; Cottrell, J. A. Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issue 5-8 https://doi.org/10.1016/j.cma.2009.02.036	journal	January 2010
Isogeometric analysis of multi-phase flows with surface tension and with application to dynamics of rising bubbles Yan, J.; Lin, S.; Bazilevs, Y. Computers & Fluids, Vol. 179 https://doi.org/10.1016/j.compfluid.2018.04.017	journal	January 2019
U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization Aydinbakar, Levent; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 67, Issue 3 https://doi.org/10.1007/s00466-020-01965-4	journal	February 2021
Numerical Simulations of Two Back-To-Back Horizontal Axis Tidal Stream Turbines in Free-Surface Flows Yan, Jinhui; Deng, Xiaowei; Xu, Fei Journal of Applied Mechanics, Vol. 87, Issue 6 https://doi.org/10.1115/1.4046317	journal	March 2020
Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows Bazilevs, Y.; Calo, V. M.; Cottrell, J. A. Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issue 1-4 https://doi.org/10.1016/j.cma.2007.07.016	journal	December 2007
Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement Hughes, T. J. R.; Cottrell, J. A.; Bazilevs, Y. Computer Methods in Applied Mechanics and Engineering, Vol. 194, Issue 39-41 https://doi.org/10.1016/j.cma.2004.10.008	journal	October 2005
Penalty coupling of non-matching isogeometric Kirchhoff–Love shell patches with application to composite wind turbine blades Herrema, Austin J.; Johnson, Emily L.; Proserpio, Davide Computer Methods in Applied Mechanics and Engineering, Vol. 346 https://doi.org/10.1016/j.cma.2018.08.038	journal	April 2019
Challenges and Directions in Computational Fluid–Structure Interaction Bazilevs, Yuri; Takizawa, Kenji; Tezduyar, Tayfun E. Mathematical Models and Methods in Applied Sciences, Vol. 23, Issue 02 https://doi.org/10.1142/S0218202513400010	journal	January 2013
Krylov subspace methods for solving large unsymmetric linear systems Saad, Y. Mathematics of Computation, Vol. 37, Issue 155 https://doi.org/10.1090/S0025-5718-1981-0616364-6	journal	September 1981
3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics Bazilevs, Y.; Hsu, M. -C.; Akkerman, I. International Journal for Numerical Methods in Fluids, Vol. 65, Issue 1-3 https://doi.org/10.1002/fld.2400	journal	August 2010
Space–time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method Otoguro, Yuto; Takizawa, Kenji; Tezduyar, Tayfun E. Computers & Fluids, Vol. 158 https://doi.org/10.1016/j.compfluid.2017.04.017	journal	November 2017
Performance and near-wake analysis of a vertical-axis hydrokinetic turbine under a turbulent inflow Dhalwala, M.; Bayram, A.; Oshkai, P. Ocean Engineering, Vol. 257 https://doi.org/10.1016/j.oceaneng.2022.111703	journal	August 2022
Advanced mesh generation and update methods for 3D flow simulations Johnson, A. A.; Tezduyar, T. E. Computational Mechanics, Vol. 23, Issue 2 https://doi.org/10.1007/s004660050393	journal	March 1999
Subdivision surfaces: a new paradigm for thin-shell finite-element analysis Cirak, Fehmi; Ortiz, Michael; Schr�der, Peter International Journal for Numerical Methods in Engineering, Vol. 47, Issue 12 https://doi.org/10.1002/(SICI)1097-0207(20000430)47:12<2039::AID-NME872>3.0.CO;2-1	journal	April 2000
Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries Ueda, Yuki; Otoguro, Yuto; Takizawa, Kenji Mathematical Models and Methods in Applied Sciences, Vol. 30, Issue 11 https://doi.org/10.1142/S0218202520500402	journal	October 2020
A new finite element formulation for computational fluid dynamics: III. The generalized streamline operator for multidimensional advective-diffusive systems Hughes, Thomas J. R.; Mallet, Michel Computer Methods in Applied Mechanics and Engineering, Vol. 58, Issue 3 https://doi.org/10.1016/0045-7825(86)90152-0	journal	November 1986
A framework for isogeometric‐analysis‐based optimization of wind turbine blade structures Herrema, Austin J.; Kiendl, Josef; Hsu, Ming‐Chen Wind Energy, Vol. 22, Issue 2 https://doi.org/10.1002/we.2276	journal	December 2018
Particle-laden flows forced by the disperse phase: Comparison between Lagrangian and Eulerian simulations Vié, Aymeric; Pouransari, Hadi; Zamansky, Rémi International Journal of Multiphase Flow, Vol. 79 https://doi.org/10.1016/j.ijmultiphaseflow.2015.10.010	journal	March 2016
Element length calculation in B-spline meshes for complex geometries Otoguro, Yuto; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 65, Issue 4 https://doi.org/10.1007/s00466-019-01809-w	journal	January 2020
A variational multiscale framework for atmospheric turbulent flows over complex environmental terrains Ravensbergen, M.; Helgedagsrud, T. A.; Bazilevs, Y. Computer Methods in Applied Mechanics and Engineering, Vol. 368 https://doi.org/10.1016/j.cma.2020.113182	journal	August 2020
Computational Methods for Parachute Fluid–Structure Interactions Takizawa, Kenji; Tezduyar, Tayfun E. Archives of Computational Methods in Engineering, Vol. 19, Issue 1 https://doi.org/10.1007/s11831-012-9070-4	journal	February 2012
Computer Modeling of Wind Turbines: 1. ALE-VMS and ST-VMS Aerodynamic and FSI Analysis Korobenko, Artem; Bazilevs, Yuri; Takizawa, Kenji Archives of Computational Methods in Engineering, Vol. 26, Issue 4 https://doi.org/10.1007/s11831-018-9292-1	journal	September 2018
Simulation of stably stratified turbulent channel flow using residual-based variational multiscale method and isogeometric analysis Cen, H.; Zhou, Q.; Korobenko, A. Computers & Fluids, Vol. 214 https://doi.org/10.1016/j.compfluid.2020.104765	journal	January 2021
Space–time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation Kuraishi, Takashi; Yamasaki, Satoshi; Takizawa, Kenji Computational Mechanics, Vol. 70, Issue 1 https://doi.org/10.1007/s00466-022-02155-0	journal	April 2022
Computational analysis methods for complex unsteady flow problems Bazilevs, Yuri; Takizawa, Kenji; Tezduyar, Tayfun E. Mathematical Models and Methods in Applied Sciences, Vol. 29, Issue 05 https://doi.org/10.1142/S0218202519020020	journal	May 2019
Aerodynamic and FSI Analysis of Wind Turbines with the ALE-VMS and ST-VMS Methods Bazilevs, Yuri; Takizawa, Kenji; Tezduyar, Tayfun E. Archives of Computational Methods in Engineering, Vol. 21, Issue 4 https://doi.org/10.1007/s11831-014-9119-7	journal	May 2014
The actuator line method for wind turbine modelling applied in a variational multiscale framework Ravensbergen, M.; Bayram Mohamed, A.; Korobenko, A. Computers & Fluids, Vol. 201 https://doi.org/10.1016/j.compfluid.2020.104465	journal	April 2020
Ram-air parachute structural and fluid mechanics computations with the Space–Time Isogeometric Analysis (ST-IGA) Takizawa, Kenji; Tezduyar, Tayfun E.; Terahara, Takuya Computers & Fluids, Vol. 141 https://doi.org/10.1016/j.compfluid.2016.05.027	journal	December 2016
High-resolution simulations of particle-driven gravity currents Necker, F.; Härtel, C.; Kleiser, L. International Journal of Multiphase Flow, Vol. 28, Issue 2 https://doi.org/10.1016/S0301-9322(01)00065-9	journal	February 2002
Large eddy simulation of turbulent Taylor–Couette flow using isogeometric analysis and the residual-based variational multiscale method Bazilevs, Y.; Akkerman, I. Journal of Computational Physics, Vol. 229, Issue 9 https://doi.org/10.1016/j.jcp.2010.01.008	journal	May 2010
Isogeometric fluid-structure interaction: theory, algorithms, and computations Bazilevs, Y.; Calo, V. M.; Hughes, T. J. R. Computational Mechanics, Vol. 43, Issue 1 https://doi.org/10.1007/s00466-008-0315-x	journal	August 2008
Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly enforced boundary conditions on unstretched meshes Bazilevs, Y.; Michler, C.; Calo, V. M. Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issue 13-16 https://doi.org/10.1016/j.cma.2008.11.020	journal	February 2010
Aorta modeling with the element-based zero-stress state and isogeometric discretization Takizawa, Kenji; Tezduyar, Tayfun E.; Sasaki, Takafumi Computational Mechanics, Vol. 59, Issue 2 https://doi.org/10.1007/s00466-016-1344-5	journal	November 2016
Fluid–structure interaction modeling of ringsail parachutes with disreefing and modified geometric porosity Takizawa, Kenji; Fritze, Matthew; Montes, Darren Computational Mechanics, Vol. 50, Issue 6 https://doi.org/10.1007/s00466-012-0761-3	journal	August 2012
Thinner biological tissues induce leaflet flutter in aortic heart valve replacements Johnson, Emily L.; Wu, Michael C. H.; Xu, Fei Proceedings of the National Academy of Sciences, Vol. 117, Issue 32 https://doi.org/10.1073/pnas.2002821117	journal	July 2020
A numerical formulation for cavitating flows around marine propellers based on variational multiscale method Bayram, A.; Korobenko, A. Computational Mechanics, Vol. 68, Issue 2 https://doi.org/10.1007/s00466-021-02039-9	journal	June 2021
Aerodynamic Simulation of Vertical-Axis Wind Turbines Korobenko, A.; Hsu, M. -C.; Akkerman, I. Journal of Applied Mechanics, Vol. 81, Issue 2 https://doi.org/10.1115/1.4024415	journal	September 2013
Two- and three-dimensional Direct Numerical Simulation of particle-laden gravity currents Espath, L. F. R.; Pinto, L. C.; Laizet, S. Computers & Geosciences, Vol. 63 https://doi.org/10.1016/j.cageo.2013.10.006	journal	February 2014
Fluid–Structure Interaction Modeling of Vertical-Axis Wind Turbines Bazilevs, Y.; Korobenko, A.; Deng, X. Journal of Applied Mechanics, Vol. 81, Issue 8 https://doi.org/10.1115/1.4027466	journal	May 2014
Isogeometric analysis of multilayer composite shell structures: Plasticity, damage, delamination and impact modeling Alaydin, M. D.; Behzadinasab, M.; Bazilevs, Y. International Journal of Solids and Structures, Vol. 252 https://doi.org/10.1016/j.ijsolstr.2022.111782	journal	October 2022
GMRES: A Generalized Minimal Residual Algorithm for Solving Nonsymmetric Linear Systems Saad, Youcef; Schultz, Martin H. SIAM Journal on Scientific and Statistical Computing, Vol. 7, Issue 3 https://doi.org/10.1137/0907058	journal	July 1986
Fluid–structure interaction modeling of clusters of spacecraft parachutes with modified geometric porosity Takizawa, Kenji; Tezduyar, Tayfun E.; Boben, Joseph Computational Mechanics, Vol. 52, Issue 6 https://doi.org/10.1007/s00466-013-0880-5	journal	July 2013
High-performance computing of wind turbine aerodynamics using isogeometric analysis Hsu, Ming-Chen; Akkerman, Ido; Bazilevs, Yuri Computers & Fluids, Vol. 49, Issue 1 https://doi.org/10.1016/j.compfluid.2011.05.002	journal	October 2011
Wall-function-based weak imposition of Dirichlet boundary condition for stratified turbulent flows Cen, Haoyang; Zhou, Qi; Korobenko, Artem Computers & Fluids, Vol. 234 https://doi.org/10.1016/j.compfluid.2021.105257	journal	February 2022
An Euler–Lagrange strategy for simulating particle-laden flows Capecelatro, Jesse; Desjardins, Olivier Journal of Computational Physics, Vol. 238 https://doi.org/10.1016/j.jcp.2012.12.015	journal	April 2013
Multiscale space–time methods for thermo-fluid analysis of a ground vehicle and its tires Takizawa, Kenji; Tezduyar, Tayfun E.; Kuraishi, Takashi Mathematical Models and Methods in Applied Sciences, Vol. 25, Issue 12 https://doi.org/10.1142/S0218202515400072	journal	August 2015
Heart valve isogeometric sequentially-coupled FSI analysis with the space–time topology change method Terahara, Takuya; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 65, Issue 4 https://doi.org/10.1007/s00466-019-01813-0	journal	January 2020
Residual-based turbulence models and arbitrary Lagrangian–Eulerian framework for free surface flows Calderer, Ramon; Zhu, Lixing; Gibson, Richard Mathematical Models and Methods in Applied Sciences, Vol. 25, Issue 12 https://doi.org/10.1142/S0218202515400096	journal	August 2015
Ale-Vms and St-Vms Methods for Computer Modeling of Wind-Turbine Rotor Aerodynamics and Fluid–Structure Interaction Bazilevs, Yuri; Hsu, Ming-Chen; Takizawa, Kenji Mathematical Models and Methods in Applied Sciences, Vol. 22, Issue supp02 https://doi.org/10.1142/S0218202512300025	journal	July 2012
Space–time VMS isogeometric analysis of the Taylor–Couette flow Aydinbakar, Levent; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 67, Issue 5 https://doi.org/10.1007/s00466-021-02004-6	journal	April 2021
Variational multiscale framework for cavitating flows Bayram, A.; Korobenko, A. Computational Mechanics, Vol. 66, Issue 1 https://doi.org/10.1007/s00466-020-01840-2	journal	March 2020
Residual-based variational multi-scale modeling for particle-laden gravity currents over flat and triangular wavy terrains Xu, S.; Liu, N.; Yan, J. Computers & Fluids, Vol. 188 https://doi.org/10.1016/j.compfluid.2019.05.008	journal	June 2019
Simulation of multiple spheres falling in a liquid-filled tube Johnson, A. A.; Tezduyar, T. E. Computer Methods in Applied Mechanics and Engineering, Vol. 134, Issue 3-4 https://doi.org/10.1016/0045-7825(95)00988-4	journal	August 1996
A moving-domain CFD solver in FEniCS with applications to tidal turbine simulations in turbulent flows Zhu, Qiming; Yan, Jinhui Computers & Mathematics with Applications, Vol. 81 https://doi.org/10.1016/j.camwa.2019.07.034	journal	January 2021
Isogeometric hyperelastic shell analysis with out-of-plane deformation mapping Takizawa, Kenji; Tezduyar, Tayfun E.; Sasaki, Takafumi Computational Mechanics, Vol. 63, Issue 4 https://doi.org/10.1007/s00466-018-1616-3	journal	August 2018
Performance analysis of two vertical-axis hydrokinetic turbines using variational multiscale method Mohamed, A. Bayram; Bear, C.; Bear, M. Computers & Fluids, Vol. 200 https://doi.org/10.1016/j.compfluid.2020.104432	journal	March 2020
A new variational multiscale formulation for stratified incompressible turbulent flows Yan, J.; Korobenko, A.; Tejada-Martínez, A. E. Computers & Fluids, Vol. 158 https://doi.org/10.1016/j.compfluid.2016.12.004	journal	November 2017
Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method: II. Spatial and temporal resolution Kuraishi, Takashi; Zhang, Fulin; Takizawa, Kenji Computational Mechanics, Vol. 68, Issue 1 https://doi.org/10.1007/s00466-021-02025-1	journal	May 2021
Stabilized Methods for Compressible Flows Hughes, Thomas J. R.; Scovazzi, Guglielmo; Tezduyar, Tayfun E. Journal of Scientific Computing, Vol. 43, Issue 3 https://doi.org/10.1007/s10915-008-9233-5	journal	August 2008
Tire aerodynamics with actual tire geometry, road contact and tire deformation Kuraishi, Takashi; Takizawa, Kenji; Tezduyar, Tayfun E. Computational Mechanics, Vol. 63, Issue 6 https://doi.org/10.1007/s00466-018-1642-1	journal	October 2018
Computational flow analysis with boundary layer and contact representation: I. Tire aerodynamics with road contact Kuraishi, Takashi; Terahara, Takuya; Takizawa, Kenji Journal of Mechanics, Vol. 38 https://doi.org/10.1093/jom/ufac009	journal	March 2022
Engineering Analysis and Design with ALE-VMS and Space–Time Methods Takizawa, Kenji; Bazilevs, Yuri; Tezduyar, Tayfun E. Archives of Computational Methods in Engineering, Vol. 21, Issue 4 https://doi.org/10.1007/s11831-014-9113-0	journal	May 2014
A parallel 3D computational method for fluid–structure interactions in parachute systems Kalro, Vinay; Tezduyar, Tayfun E. Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issue 3-4 https://doi.org/10.1016/S0045-7825(00)00204-8	journal	October 2000
Stabilized space–time computation of wind-turbine rotor aerodynamics Takizawa, Kenji; Henicke, Bradley; Tezduyar, Tayfun E. Computational Mechanics, Vol. 48, Issue 3 https://doi.org/10.1007/s00466-011-0589-2	journal	March 2011
Space–time Isogeometric flow analysis with built-in Reynolds-equation limit Kuraishi, Takashi; Takizawa, Kenji; Tezduyar, Tayfun E. Mathematical Models and Methods in Applied Sciences, Vol. 29, Issue 05 https://doi.org/10.1142/S0218202519410021	journal	May 2019
Isogeometric Fatigue Damage Prediction in Large-Scale Composite Structures Driven by Dynamic Sensor Data Bazilevs, Y.; Deng, X.; Korobenko, A. Journal of Applied Mechanics, Vol. 82, Issue 9 https://doi.org/10.1115/1.4030795	journal	September 2015
Compressible flows on moving domains: Stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling Xu, Fei; Moutsanidis, George; Kamensky, David Computers & Fluids, Vol. 158 https://doi.org/10.1016/j.compfluid.2017.02.006	journal	November 2017
IGA-MPM: The Isogeometric Material Point Method Moutsanidis, Georgios; Long, Christopher C.; Bazilevs, Yuri Computer Methods in Applied Mechanics and Engineering, Vol. 372 https://doi.org/10.1016/j.cma.2020.113346	journal	December 2020
Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method Bazilevs, Yuri; Takizawa, Kenji; Wu, Michael C. H. Computational Mechanics, Vol. 67, Issue 1 https://doi.org/10.1007/s00466-020-01919-w	journal	September 2020
Computational flow analysis with boundary layer and contact representation: II. Heart valve flow with leaflet contact Terahara, Takuya; Kuraishi, Takashi; Takizawa, Kenji Journal of Mechanics, Vol. 38 https://doi.org/10.1093/jom/ufac013	journal	March 2022
Space–Time and ALE-VMS Techniques for Patient-Specific Cardiovascular Fluid–Structure Interaction Modeling Takizawa, Kenji; Bazilevs, Yuri; Tezduyar, Tayfun E. Archives of Computational Methods in Engineering, Vol. 19, Issue 2 https://doi.org/10.1007/s11831-012-9071-3	journal	May 2012
Dynamic and fluid–structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models Hsu, Ming-Chen; Kamensky, David; Xu, Fei Computational Mechanics, Vol. 55, Issue 6 https://doi.org/10.1007/s00466-015-1166-x	journal	May 2015
Two- and Four-Way Coupled Euler–Lagrangian Large-Eddy Simulation of Turbulent Particle-Laden Channel Flow Vreman, Bert; Geurts, Bernard J.; Deen, N. G. Flow, Turbulence and Combustion, Vol. 82, Issue 1 https://doi.org/10.1007/s10494-008-9173-z	journal	August 2008
Computational Fluid-Structure Interaction: Methods and Applications Bazilevs, Yuri; Takizawa, Kenji; Tezduyar, Tayfun E. https://doi.org/10.1002/9781118483565	book	January 2013
Stabilization and discontinuity-capturing parameters for space–time flow computations with finite element and isogeometric discretizations Takizawa, Kenji; Tezduyar, Tayfun E.; Otoguro, Yuto Computational Mechanics, Vol. 62, Issue 5 https://doi.org/10.1007/s00466-018-1557-x	journal	April 2018
Anatomically realistic lumen motion representation in patient-specific space–time isogeometric flow analysis of coronary arteries with time-dependent medical-image data Yu, Yuxuan; Zhang, Yongjie Jessica; Takizawa, Kenji Computational Mechanics, Vol. 65, Issue 2 https://doi.org/10.1007/s00466-019-01774-4	journal	October 2019
Numerical-performance studies for the stabilized space–time computation of wind-turbine rotor aerodynamics Takizawa, Kenji; Henicke, Bradley; Montes, Darren Computational Mechanics, Vol. 48, Issue 6 https://doi.org/10.1007/s00466-011-0614-5	journal	June 2011

Similar Records

IGA-MPM: The Isogeometric Material Point Method

Journal Article · Sat Aug 22 00:00:00 EDT 2020 · Computer Methods in Applied Mechanics and Engineering · OSTI ID:1711396

An isogeometric variational multiscale method for large-eddy simulation of coupled multi-ion transport in turbulent flow

Journal Article · Tue Oct 15 00:00:00 EDT 2013 · Journal of Computational Physics · OSTI ID:22230807

Related Subjects

Mathematics

Isogeometric large-eddy simulations of turbulent particle-laden flows

Citation Formats

References (114)

Similar Records

Related Subjects