Microstrain partitioning, Transformation Induced Plasticity, and the evolution of damage during deformation of an austenitic-martensitic 1.5&nbsp;GPa Quench and Partition steel

Pelligra, Concetta; Samei, Javad; Shalchi Amirkhiz, Babak; Hector, Jr, Louis G.; Wilkinson, David S.

doi:10.1016/j.msea.2024.146181

Microstrain partitioning, Transformation Induced Plasticity, and the evolution of damage during deformation of an austenitic-martensitic 1.5 GPa Quench and Partition steel

Journal Article · Thu Feb 29 23:00:00 EST 2024 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2024.146181· OSTI ID:2369856

; Samei, Javad; Shalchi Amirkhiz, Babak; ;

Not Available

View Accepted Manuscript (Publisher)

🛈

This content will become publicly available on Fri Feb 27 19:00:00 EST 2026

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: AC02-06CH11357

OSTI ID:: 2369856

Alternate ID(s):: OSTI ID: 2581202

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Issue: C Vol. 895; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (79)

Extension of the Martensite Transformation Temperature Relation to Larger Alloying Elements and Contents Barbier, David Advanced Engineering Materials, Vol. 16, Issue 1 https://doi.org/10.1002/adem.201300116	journal	October 2013
The Role of Transformation-Induced Plasticity in the Development of Advanced High Strength Steels Liu, Li; He, Binbin; Huang, Mingxin Advanced Engineering Materials, Vol. 20, Issue 6 https://doi.org/10.1002/adem.201701083	journal	March 2018
Behaviour Model of Austenitic Stainless Steels for Automotive Structural Parts Santacreu, Pierre-Olivier; Glez, Jean-Christophe; Chinouilh, Guillaume steel research international, Vol. 77, Issue 9-10 https://doi.org/10.1002/srin.200606448	journal	September 2006
Early stages of yielding and strain aging of a vanadium-containing dual-phase steel Davies, R. G. Metallurgical Transactions A, Vol. 10, Issue 10 https://doi.org/10.1007/BF02812021	journal	October 1979
Fracture toughness of high-alloy austenitic-martensitic TRIP steels after Q&P processing Eckner, R.; Krüger, L.; Ullrich, C. International Journal of Fracture, Vol. 215, Issue 1-2 https://doi.org/10.1007/s10704-018-0332-5	journal	December 2018
Analysis and design of a three-phase TRIP steel microstructure for enhanced fracture resistance Li, Zhi; Kiran, Ravi; Hu, Jun International Journal of Fracture, Vol. 221, Issue 1 https://doi.org/10.1007/s10704-019-00405-6	journal	December 2019
Optimization of Digital Image Correlation for High-Resolution Strain Mapping of Ceramic Composites Rajan, V. P.; Rossol, M. N.; Zok, F. W. Experimental Mechanics, Vol. 52, Issue 9 https://doi.org/10.1007/s11340-012-9617-1	journal	April 2012
A Review of Speckle Pattern Fabrication and Assessment for Digital Image Correlation Dong, Y. L.; Pan, B. Experimental Mechanics, Vol. 57, Issue 8 https://doi.org/10.1007/s11340-017-0283-1	journal	May 2017
Application of Quenching and Partitioning Processing to Medium Mn Steel Seo, Eun Jung; Cho, Lawrence; De Cooman, Bruno C. Metallurgical and Materials Transactions A, Vol. 46, Issue 1 https://doi.org/10.1007/s11661-014-2657-7	journal	November 2014
Fracture Toughness to Understand Stretch-Flangeability and Edge Cracking Resistance in AHSS Casellas, Daniel; Lara, Antoni; Frómeta, David Metallurgical and Materials Transactions A, Vol. 48, Issue 1 https://doi.org/10.1007/s11661-016-3815-x	journal	October 2016
In Situ Local Measurement of Austenite Mechanical Stability and Transformation Behavior in Third-Generation Advanced High-Strength Steels Abu-Farha, Fadi; Hu, Xiaohua; Sun, Xin Metallurgical and Materials Transactions A, Vol. 49, Issue 7 https://doi.org/10.1007/s11661-018-4660-x	journal	May 2018
Microstructural Evolution During Deformation of a QP980 Steel Salehiyan, Diyar; Samei, Javad; Amirkhiz, Babak Shalchi Metallurgical and Materials Transactions A, Vol. 51, Issue 9 https://doi.org/10.1007/s11661-020-05882-2	journal	June 2020
Fracture Resistance of Advanced High-Strength Steel Sheets for Automotive Applications Frómeta, D.; Lara, A.; Grifé, L. Metallurgical and Materials Transactions A, Vol. 52, Issue 2 https://doi.org/10.1007/s11661-020-06119-y	journal	January 2021
The Reliability of Single-Step and Double-Step Quench and Partitioning Heat Treatments on an AISI 420A Low Carbon Martensitic Stainless Steel Barella, S.; Gruttadauria, A.; Menezes, J. T. O. Metallurgical and Materials Transactions A, Vol. 54, Issue 10 https://doi.org/10.1007/s11661-023-07145-2	journal	July 2023
Analysis of Microstructure Effects on Edge Crack of Thin Strip During Cold Rolling Xie, Haibo; Jiang, Zhengyi; Yuen, W. Y. Daniel Metallurgical and Materials Transactions B, Vol. 42, Issue 6 https://doi.org/10.1007/s11663-011-9540-3	journal	June 2011
Nanoscale Solute Partitioning and Carbide Precipitation in a Multiphase TRIP Steel Analyzed by Atom Probe Tomography Devaraj, Arun; Xu, Zeren; Abu-Farha, Fadi JOM, Vol. 70, Issue 9 https://doi.org/10.1007/s11837-018-2974-1	journal	June 2018
Processing routes, resulting microstructures, and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications Nanda, Tarun; Singh, Vishal; Singh, Gurpreet Archives of Civil and Mechanical Engineering, Vol. 21, Issue 1 https://doi.org/10.1007/s43452-020-00149-4	journal	January 2021
Enhancement of fracture toughness in high strength steel by microstructural control Parker, E. R.; Zackay, V. F. Engineering Fracture Mechanics, Vol. 5, Issue 1 https://doi.org/10.1016/0013-7944(73)90013-1	journal	February 1973
Observation of deformation and transformation behavior of retained austenite in a 0.14C-1.2Si-1.5Mn steel with ferrite-bainite-austenite structure Jeong, W. C.; Matlock, D. K.; Krauss, G. Materials Science and Engineering: A, Vol. 165, Issue 1 https://doi.org/10.1016/0921-5093(93)90620-T	journal	June 1993
Correlation between nanoindentation and tensile propertiesInfluence of the indentation size effect Rodriguez, R.; Gutierrez, I. Materials Science and Engineering A, Vol. 361, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00563-X	journal	November 2003
Metallographic Methods for Revealing the Multiphase Microstructure of TRIP-Assisted Steels Girault, E.; Jacques, P.; Harlet, Ph. Materials Characterization, Vol. 40, Issue 2 https://doi.org/10.1016/S1044-5803(97)00154-X	journal	February 1998
On the role of martensitic transformation on damage and cracking resistance in TRIP-assisted multiphase steels Jacques, P. Acta Materialia, Vol. 49, Issue 1 https://doi.org/10.1016/S1359-6454(00)00215-9	journal	January 2001
Carbon partitioning into austenite after martensite transformation Speer, J.; Matlock, D. K.; De Cooman, B. C. Acta Materialia, Vol. 51, Issue 9 https://doi.org/10.1016/S1359-6454(03)00059-4	journal	May 2003
Strain induced martensite formation and its effect on strain hardening behavior in the cold drawn 304 austenitic stainless steels Choi, Jeom-Yong; Jin, Won Scripta Materialia, Vol. 36, Issue 1 https://doi.org/10.1016/S1359-6462(96)00338-7	journal	January 1997
Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation Beese, Allison M.; Mohr, Dirk Acta Materialia, Vol. 59, Issue 7 https://doi.org/10.1016/j.actamat.2010.12.040	journal	April 2011
Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomography and correlative transmission electron microscopy Toji, Yuki; Matsuda, Hiroshi; Herbig, Michael Acta Materialia, Vol. 65 https://doi.org/10.1016/j.actamat.2013.10.064	journal	February 2014
High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels Yan, Dingshun; Tasan, Cemal Cem; Raabe, Dierk Acta Materialia, Vol. 96 https://doi.org/10.1016/j.actamat.2015.05.038	journal	September 2015
Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach Hu, X. H.; Sun, X.; Hector, L. G. Acta Materialia, Vol. 132 https://doi.org/10.1016/j.actamat.2017.04.028	journal	June 2017
Quenching and partitioning (Q&P) processing of fully austenitic stainless steels Wendler, M.; Ullrich, C.; Hauser, M. Acta Materialia, Vol. 133 https://doi.org/10.1016/j.actamat.2017.05.049	journal	July 2017
New insights into martensite strength and the damage behaviour of dual phase steels Scott, C. P.; Shalchi Amirkhiz, B.; Pushkareva, I. Acta Materialia, Vol. 159 https://doi.org/10.1016/j.actamat.2018.08.010	journal	October 2018
Phase transformation mechanisms during Quenching and Partitioning of a ductile cast iron Nishikawa, Arthur S.; Miyamoto, Goro; Furuhara, Tadashi Acta Materialia, Vol. 179 https://doi.org/10.1016/j.actamat.2019.08.001	journal	October 2019
The dual role of TRIP effect on ductility and toughness of a medium Mn steel Hu, C.; Huang, C. P.; Liu, Y. X. Acta Materialia, Vol. 245 https://doi.org/10.1016/j.actamat.2022.118629	journal	February 2023
Mechanistic role of Mn heterogeneity in austenite decomposition and stabilization in a commercial quenching and partitioning steel Ding, Ran; Zhang, Chaofan; Wang, Yan Acta Materialia, Vol. 250 https://doi.org/10.1016/j.actamat.2023.118869	journal	May 2023
An in situ investigation of neighborhood effects in a ferrite-containing quenching and partitioning steel: Mechanical stability, strain partitioning, and damage Kang, Jiyun; Pottore, Narayan S.; Zhu, Hong Acta Materialia, Vol. 254 https://doi.org/10.1016/j.actamat.2023.118985	journal	August 2023
Study the effect of martensite banding on the failure initiation in dual-phase steel Ramazani, A.; Ebrahimi, Z.; Prahl, U. Computational Materials Science, Vol. 87 https://doi.org/10.1016/j.commatsci.2014.01.051	journal	May 2014
On the correlation between fracture toughness and crash resistance of advanced high strength steels Frómeta, D.; Lara, A.; Molas, S. Engineering Fracture Mechanics, Vol. 205 https://doi.org/10.1016/j.engfracmech.2018.10.005	journal	January 2019
Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations Tasan, C. C.; Hoefnagels, J. P. M.; Diehl, M. International Journal of Plasticity, Vol. 63 https://doi.org/10.1016/j.ijplas.2014.06.004	journal	December 2014
Microstructural analysis of ductility and fracture in fine-grained and ultrafine-grained vanadium-added DP1300 steels Samei, Javad; Zhou, Linfeng; Kang, Jidong International Journal of Plasticity, Vol. 117 https://doi.org/10.1016/j.ijplas.2017.12.009	journal	June 2019
Crystal plasticity modeling of 3rd generation multi-phase AHSS with martensitic transformation Park, Taejoon; Hector, Louis G.; Hu, Xiaohua International Journal of Plasticity, Vol. 120 https://doi.org/10.1016/j.ijplas.2019.03.010	journal	September 2019
Mesoscopic origin of damage nucleation in dual-phase steels Tang, Ao; Liu, Haiting; Chen, Ran International Journal of Plasticity, Vol. 137 https://doi.org/10.1016/j.ijplas.2020.102920	journal	February 2021
The effect of vanadium on microstrain partitioning and localized damage during deformation of unnotched and notched DP1300 steels Pelligra, Concetta; Samei, Javad; Kang, Jidong International Journal of Plasticity, Vol. 158 https://doi.org/10.1016/j.ijplas.2022.103435	journal	November 2022
Grain size effects in multiphase steels assisted by transformation-induced plasticity Turteltaub, S.; Suiker, A. S. J. International Journal of Solids and Structures, Vol. 43, Issue 24 https://doi.org/10.1016/j.ijsolstr.2006.06.017	journal	November 2006
Micromechanics of plastic deformation and phase transformation in a three-phase TRIP-assisted advanced high strength steel: Experiments and modeling Srivastava, Ankit; Ghassemi-Armaki, Hassan; Sung, Hyokyung Journal of the Mechanics and Physics of Solids, Vol. 78 https://doi.org/10.1016/j.jmps.2015.01.014	journal	May 2015
Design of tough, ductile direct quenched and partitioned advanced high-strength steel with tailored silicon content Ghosh, Sumit; Kaikkonen, Pentti; Javaheri, Vahid Journal of Materials Research and Technology, Vol. 17 https://doi.org/10.1016/j.jmrt.2022.01.073	journal	March 2022
Controlling the work hardening of martensite to increase the strength/ductility balance in quenched and partitioned steels Findley, K. O.; Hidalgo, J.; Huizenga, R. M. Materials & Design, Vol. 117 https://doi.org/10.1016/j.matdes.2016.12.065	journal	March 2017
In-situ X-ray tomography analysis of the evolution of pores during deformation of AlSi10Mg fabricated by selective laser melting Samei, Javad; Amirmaleki, Maedeh; Shirinzadeh Dastgiri, Mohammad Materials Letters, Vol. 255 https://doi.org/10.1016/j.matlet.2019.126512	journal	November 2019
Microstructural design for damage tolerance in high strength steels Samei, Javad; Pelligra, Concetta; Amirmaleki, M. Materials Letters, Vol. 269 https://doi.org/10.1016/j.matlet.2020.127664	journal	June 2020
Effect of martensite distribution on damage behaviour in DP600 dual phase steels Avramovic-Cingara, G.; Ososkov, Y.; Jain, M. K. Materials Science and Engineering: A, Vol. 516, Issue 1-2 https://doi.org/10.1016/j.msea.2009.03.055	journal	August 2009
Structure-properties relationship of ultra-fine grained V-microalloyed dual phase steels Scott, C. P.; Fazeli, F.; Shalchi Amirkhiz, B. Materials Science and Engineering: A, Vol. 703 https://doi.org/10.1016/j.msea.2017.07.051	journal	August 2017
One-step quenching and partitioning treatment of a commercial low silicon boron steel Kong, H.; Chao, Q.; Cai, M. H. Materials Science and Engineering: A, Vol. 707 https://doi.org/10.1016/j.msea.2017.09.038	journal	November 2017
Deformation mode and strain path dependence of martensite phase transformation in a medium manganese TRIP steel Wu, Wei; Wang, Yu-Wei; Makrygiannis, Panagiotis Materials Science and Engineering: A, Vol. 711 https://doi.org/10.1016/j.msea.2017.11.008	journal	January 2018
Fracture mechanisms and microstructure in a medium Mn quenching and partitioning steel exhibiting macrosegregation Hidalgo, J.; Celada-Casero, C.; Santofimia, M. J. Materials Science and Engineering: A, Vol. 754 https://doi.org/10.1016/j.msea.2019.03.055	journal	April 2019
Mechanical property development of a 0.15C–6Mn–2Al–1Si third-generation advanced high strength steel using continuous galvanizing heat treatments Pallisco, Daniella M.; McDermid, Joseph R. Materials Science and Engineering: A, Vol. 778 https://doi.org/10.1016/j.msea.2020.139111	journal	March 2020
Transformation-induced plasticity (TRIP) in advanced steels: A review Soleimani, Maryam; Kalhor, Alireza; Mirzadeh, Hamed Materials Science and Engineering: A, Vol. 795 https://doi.org/10.1016/j.msea.2020.140023	journal	September 2020
In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation Yang, Hao; Wang, Huamiao; Yang, Zhaolong Materials Science and Engineering: A, Vol. 802 https://doi.org/10.1016/j.msea.2020.140425	journal	January 2021
Microstructure and mechanical properties of partially ferritic Q&P steels Kickinger, Christoph; Suppan, Clemens; Hebesberger, Thomas Materials Science and Engineering: A, Vol. 815 https://doi.org/10.1016/j.msea.2021.141296	journal	May 2021
Effects of CGL-compatible thermal processing, starting microstructure, and Sn micro-alloying on the mechanical properties of a medium-Mn third generation advanced high strength steel Bhadhon, K. M. H.; Wang, X.; McDermid, J. R. Materials Science and Engineering: A, Vol. 833 https://doi.org/10.1016/j.msea.2021.142563	journal	January 2022
Improving mechanical properties and retained-austenite stability of a medium carbon Q&P steel by adjusting phase ratio Dong, X. X.; Shen, Y. F.; Jia, N. Materials Science and Engineering: A, Vol. 833 https://doi.org/10.1016/j.msea.2021.142580	journal	January 2022
Analysis of work hardening mechanisms in Quenching and Partitioning steels combining experiments with a 3D micro-mechanical model Celada-Casero, Carola; Vercruysse, Florian; Linke, Bernd Materials Science and Engineering: A, Vol. 846 https://doi.org/10.1016/j.msea.2022.143301	journal	June 2022
Hole Expansion Characteristics of Ultra High Strength Steels Chen, Xinping; Jiang, Haoming; Cui, Zhenxiang Procedia Engineering, Vol. 81 https://doi.org/10.1016/j.proeng.2014.10.066	journal	January 2014
Digital image correlation studies for microscopic strain distribution and damage in dual phase steels Kang, J.; Ososkov, Y.; Embury, J. Scripta Materialia, Vol. 56, Issue 11 https://doi.org/10.1016/j.scriptamat.2007.01.031	journal	June 2007
Enhanced mechanical properties of a hot stamped advanced high-strength steel treated by quenching and partitioning process Liu, Heping; Lu, Xianwen; Jin, Xuejun Scripta Materialia, Vol. 64, Issue 8 https://doi.org/10.1016/j.scriptamat.2010.12.037	journal	April 2011
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel Xiong, X. C.; Chen, B.; Huang, M. X. Scripta Materialia, Vol. 68, Issue 5 https://doi.org/10.1016/j.scriptamat.2012.11.003	journal	March 2013
Martensite size effects on damage in quenching and partitioning steels Wang, M. -M.; Hell, J. -C.; Tasan, C. C. Scripta Materialia, Vol. 138 https://doi.org/10.1016/j.scriptamat.2017.05.021	journal	September 2017
The role of microstructure on edge cracks in dual phase and quench and partitioning steels subject to severe cold rolling Samei, Javad; Salib, Youssef; Amirmaleki, Maedeh Scripta Materialia, Vol. 173 https://doi.org/10.1016/j.scriptamat.2019.08.012	journal	December 2019
Evaluation of edge formability in high strength sheets through a fracture mechanics approach Frómeta, D.; Lara, A.; Parareda, S. AIP Conference Proceedings https://doi.org/10.1063/1.5112704	conference	January 2019
An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design Tasan, C. C.; Diehl, M.; Yan, D. Annual Review of Materials Research, Vol. 45, Issue 1 https://doi.org/10.1146/annurev-matsci-070214-021103	journal	July 2015
On measurement of retained austenite in multiphase TRIP steels — results of blind round robin test involving six different techniques Jacques, P. J.; Allain, S.; Bouaziz, O. Materials Science and Technology, Vol. 25, Issue 5 https://doi.org/10.1179/174328408X353723	journal	May 2009
State-of-the-knowledge on TWIP steel De Cooman, B. C.; Kwon, O.; Chin, K-G Materials Science and Technology, Vol. 28, Issue 5 https://doi.org/10.1179/1743284711Y.0000000095	journal	May 2012
Austenite stability for quenching and partitioning treated steel revealed by colour tint-etching method Zhao, H. S.; Zhu, X.; Li, W. Materials Science and Technology, Vol. 30, Issue 9 https://doi.org/10.1179/1743284714Y.0000000517	journal	July 2014
Critical Assessment 7: Quenching and partitioning Speer, J. G.; De Moor, E.; Clarke, A. J. Materials Science and Technology, Vol. 31, Issue 1 https://doi.org/10.1179/1743284714Y.0000000628	journal	August 2014
Microscopic Strain Mapping Using Scanning Electron Microscopy Topography Image Correlation at Large Strain Kang, J.; Jain, M.; Wilkinson, D. S. The Journal of Strain Analysis for Engineering Design, Vol. 40, Issue 6 https://doi.org/10.1243/030932405X16151	journal	August 2005
Twinning effects on strength and plasticity of metallic materials Wang, Jian; Zhang, Xinghang MRS Bulletin, Vol. 41, Issue 4 https://doi.org/10.1557/mrs.2016.67	journal	April 2016
The "quenching and partitioning" process: background and recent progress Speer, John G.; Assunção, Fernando C. Rizzo; Matlock, David K. Materials Research, Vol. 8, Issue 4 https://doi.org/10.1590/S1516-14392005000400010	journal	December 2005
Deformation Behavior of Low Carbon TRIP Sheet Steels at High Strain Rates. Choi, I. D.; Bruce, D. M.; Kim, S. J. ISIJ International, Vol. 42, Issue 12 https://doi.org/10.2355/isijinternational.42.1483	journal	January 2002
Effect of Carbon and Manganese on the Quenching and Partitioning Response of CMnSi Steels Moor, Emmanuel De; Speer, John Gordon; Matlock, David Kidder ISIJ International, Vol. 51, Issue 1 https://doi.org/10.2355/isijinternational.51.137	journal	January 2011
Role of Silicon in Quenching and Partitioning Treatment of Low-carbon Martensitic Stainless Steel Tobata, Junya; Ngo-Huynh, Kinh-Luan; Nakada, Nobuo ISIJ International, Vol. 52, Issue 7 https://doi.org/10.2355/isijinternational.52.1377	journal	January 2012
The Influence of Vanadium Additions on Isothermally Formed Bainite Microstructures in Medium Carbon Steels Containing Retained Austenite Pushkareva, Irina; Shalchi-Amirkhiz, Babak; Allain, Sébastien Yves Pierre Metals, Vol. 10, Issue 3 https://doi.org/10.3390/met10030392	journal	March 2020
The Influence of Edge Preparation Method on the Hole Expansion Performance of Automotive Sheet Steels Hance, Brandon M.; Comstock, Robert J.; Scherrer, Daniel K. SAE Technical Paper Series https://doi.org/10.4271/2013-01-1167	conference	April 2013

Similar Records

Microstrain partitioning, Transformation Induced Plasticity, and the evolution of damage during deformation of an austenitic-martensitic 1.5 GPa Quench and Partition steel

Journal Article · Thu Feb 29 23:00:00 EST 2024 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:2581202

Kinetics of martensitic transformation in the plastic deformation of chromium-nickel austenitic steels

Journal Article · Thu May 01 00:00:00 EDT 1986 · Strength Mater. (Engl. Transl.); (United States) · OSTI ID:5474981

Microstrain partitioning, Transformation Induced Plasticity, and the evolution of damage during deformation of an austenitic-martensitic 1.5 GPa Quench and Partition steel

Citation Formats

References (79)

Similar Records

Related Subjects