Additive manufacturing for energy: A review

Sun, Cheng; Wang, Yun; McMurtrey, Michael D.; Jerred, Nathan D.; Liou, Frank; Li, Ju

doi:10.1016/j.apenergy.2020.116041

Additive manufacturing for energy: A review

Journal Article · Fri Jan 01 00:00:00 EST 2021 · Applied Energy

DOI:https://doi.org/10.1016/j.apenergy.2020.116041· OSTI ID:2325364

Sun, Cheng; Wang, Yun; McMurtrey, Michael D.; Jerred, Nathan D.; Liou, Frank; Li, Ju

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE

OSTI ID:: 2325364

Alternate ID(s):: OSTI ID: 23188628

Journal Information:: Applied Energy, Journal Name: Applied Energy Journal Issue: PA Vol. 282; ISSN 0306-2619

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (125)

3D-Printed All-Fiber Li-Ion Battery toward Wearable Energy Storage Wang, Yibo; Chen, Chaoji; Xie, Hua Advanced Functional Materials, Vol. 27, Issue 43 https://doi.org/10.1002/adfm.201703140	journal	September 2017
A Stencil Printed, High Energy Density Silver Oxide Battery Using a Novel Photopolymerizable Poly(acrylic acid) Separator Braam, Kyle; Subramanian, Vivek Advanced Materials, Vol. 27, Issue 4 https://doi.org/10.1002/adma.201404149	journal	December 2014
3D Printing of Living Responsive Materials and Devices Liu, Xinyue; Yuk, Hyunwoo; Lin, Shaoting Advanced Materials, Vol. 30, Issue 4 https://doi.org/10.1002/adma.201704821	journal	December 2017
Extrusion-Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes Lacey, Steven D.; Kirsch, Dylan J.; Li, Yiju Advanced Materials, Vol. 30, Issue 12 https://doi.org/10.1002/adma.201705651	journal	January 2018
Rafting‐Enabled Recovery Avoids Recrystallization in 3D‐Printing‐Repaired Single‐Crystal Superalloys Chen, Kai; Huang, Runqiu; Li, Yao Advanced Materials, Vol. 32, Issue 12 https://doi.org/10.1002/adma.201907164	journal	February 2020
Intragranular Dispersion of Carbon Nanotubes Comprehensively Improves Aluminum Alloys So, Kang Pyo; Kushima, Akihiro; Park, Jong Gil Advanced Science, Vol. 5, Issue 7 https://doi.org/10.1002/advs.201800115	journal	April 2018
3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability Blake, Aaron J.; Kohlmeyer, Ryan R.; Hardin, James O. Advanced Energy Materials, Vol. 7, Issue 14 https://doi.org/10.1002/aenm.201602920	journal	March 2017
3D Printing Sulfur Copolymer-Graphene Architectures for Li-S Batteries Shen, Kai; Mei, Hailong; Li, Bin Advanced Energy Materials, Vol. 8, Issue 4 https://doi.org/10.1002/aenm.201701527	journal	September 2017
Modelling studies applied to functionally graded materials Markworth, A. J.; Ramesh, K. S.; Parks, W. P. Journal of Materials Science, Vol. 30, Issue 9 https://doi.org/10.1007/BF01184560	journal	May 1995
In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system Clijsters, S.; Craeghs, T.; Buls, S. The International Journal of Advanced Manufacturing Technology, Vol. 75, Issue 5-8 https://doi.org/10.1007/s00170-014-6214-8	journal	August 2014
Data mining and statistical inference in selective laser melting Kamath, Chandrika The International Journal of Advanced Manufacturing Technology, Vol. 86, Issue 5-8 https://doi.org/10.1007/s00170-015-8289-2	journal	January 2016
Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel Tapia, Gustavo; Khairallah, Saad; Matthews, Manyalibo The International Journal of Advanced Manufacturing Technology, Vol. 94, Issue 9-12 https://doi.org/10.1007/s00170-017-1045-z	journal	September 2017
Additive manufacturing: technology, applications and research needs Guo, Nannan; Leu, Ming C. Frontiers of Mechanical Engineering, Vol. 8, Issue 3 https://doi.org/10.1007/s11465-013-0248-8	journal	May 2013
Process efficiency measurements in the laser engineered net shaping process Unocic, R. R.; DuPont, J. N. Metallurgical and Materials Transactions B, Vol. 35, Issue 1 https://doi.org/10.1007/s11663-004-0104-7	journal	February 2004
Metrology Needs for Metal Additive Manufacturing Powders Slotwinski, John A.; Garboczi, Edward J. JOM, Vol. 67, Issue 3 https://doi.org/10.1007/s11837-014-1290-7	journal	January 2015
Binder Jetting: A Novel Solid Oxide Fuel-Cell Fabrication Process and Evaluation Manogharan, Guha; Kioko, Meshack; Linkous, Clovis JOM, Vol. 67, Issue 3 https://doi.org/10.1007/s11837-015-1296-9	journal	January 2015
Advanced Manufacturing for Nuclear Energy Lou, Xiaoyuan; Gandy, David JOM, Vol. 71, Issue 8 https://doi.org/10.1007/s11837-019-03607-4	journal	June 2019
Process capability study of polyjet printing for plastic components Singh, Rupinder Journal of Mechanical Science and Technology, Vol. 25, Issue 4 https://doi.org/10.1007/s12206-011-0203-8	journal	April 2011
Molecular dynamics study of thermodynamic properties of nanoclusters for additive manufacturing Vo, Truong Quoc; Kim, Bo Hung International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, Issue 3 https://doi.org/10.1007/s40684-017-0036-8	journal	July 2017
Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing Spierings, A. B.; Voegtlin, M.; Bauer, T. Progress in Additive Manufacturing, Vol. 1, Issue 1-2 https://doi.org/10.1007/s40964-015-0001-4	journal	July 2015
Effects of powder characteristics and processing conditions on the corrosion performance of 17-4 PH stainless steel fabricated by laser-powder bed fusion Irrinki, Harish; Harper, Talia; Badwe, Sunil Progress in Additive Manufacturing, Vol. 3, Issue 1-2 https://doi.org/10.1007/s40964-018-0048-0	journal	May 2018
Modeling and designing functionally graded material components for fabrication with local composition control Jackson, T. R.; Liu, H.; Patrikalakis, N. M. Materials & Design, Vol. 20, Issue 2-3 https://doi.org/10.1016/S0261-3069(99)00011-4	journal	June 1999
Numerical simulation of the laser welding process in butt-joint specimens Tsirkas, S. A.; Papanikos, P.; Kermanidis, Th Journal of Materials Processing Technology, Vol. 134, Issue 1 https://doi.org/10.1016/S0924-0136(02)00921-4	journal	March 2003
Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping Liu, Weiping; DuPont, J. N. Scripta Materialia, Vol. 48, Issue 9 https://doi.org/10.1016/S1359-6462(03)00020-4	journal	May 2003
Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling Carroll, Beth E.; Otis, Richard A.; Borgonia, John Paul Acta Materialia, Vol. 108 https://doi.org/10.1016/j.actamat.2016.02.019	journal	April 2016
A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research Wang, Yun; Chen, Ken S.; Mishler, Jeffrey Applied Energy, Vol. 88, Issue 4 https://doi.org/10.1016/j.apenergy.2010.09.030	journal	April 2011
Continuous power generation from glucose with two different miniature flow-through enzymatic biofuel cells du Toit, Hendrik; Di Lorenzo, Mirella Biosensors and Bioelectronics, Vol. 69 https://doi.org/10.1016/j.bios.2015.02.036	journal	July 2015
Surface integrity of selective-laser-melted components Brinksmeier, E.; Levy, G.; Meyer, D. CIRP Annals, Vol. 59, Issue 1 https://doi.org/10.1016/j.cirp.2010.03.131	journal	January 2010
Graphite-based indirect laser sintered fuel cell bipolar plates containing carbon fiber additions Bourell, D. L.; Leu, M. C.; Chakravarthy, K. CIRP Annals, Vol. 60, Issue 1 https://doi.org/10.1016/j.cirp.2011.03.105	journal	January 2011
Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys Mukherjee, T.; Wei, H. L.; De, A. Computational Materials Science, Vol. 150 https://doi.org/10.1016/j.commatsci.2018.04.027	journal	July 2018
On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing Lou, Xiaoyuan; Song, Miao; Emigh, Paul W. Corrosion Science, Vol. 128 https://doi.org/10.1016/j.corsci.2017.09.017	journal	November 2017
Feedstock powder processing research needs for additive manufacturing development Anderson, Iver E.; White, Emma M. H.; Dehoff, Ryan Current Opinion in Solid State and Materials Science, Vol. 22, Issue 1 https://doi.org/10.1016/j.cossms.2018.01.002	journal	February 2018
Three-dimensional Inkjet Printed Solid Oxide Electrochemical Reactors. I. Yttria-stabilized Zirconia Electrolyte Farandos, N. M.; Kleiminger, L.; Li, T. Electrochimica Acta, Vol. 213 https://doi.org/10.1016/j.electacta.2016.07.103	journal	September 2016
Novel rechargeable 3D-Microbatteries on 3D-printed-polymer substrates: Feasibility study Cohen, E.; Menkin, S.; Lifshits, M. Electrochimica Acta, Vol. 265 https://doi.org/10.1016/j.electacta.2018.01.197	journal	March 2018
Ton-scale metal–carbon nanotube composite: The mechanism of strengthening while retaining tensile ductility So, Kang Pyo; Liu, Xiaohui; Mori, Hideki Extreme Mechanics Letters, Vol. 8 https://doi.org/10.1016/j.eml.2016.04.002	journal	September 2016
Stainless steel micro fuel cells with enclosed channels by laser additive manufacturing Scotti, Gianmario; Kanninen, Petri; Matilainen, Ville-Pekka Energy, Vol. 106 https://doi.org/10.1016/j.energy.2016.03.086	journal	July 2016
An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor Afshari, E.; Mosharaf-Dehkordi, M.; Rajabian, H. Energy, Vol. 118 https://doi.org/10.1016/j.energy.2016.10.101	journal	January 2017
New technology and possible advances in energy storage Baker, John Energy Policy, Vol. 36, Issue 12 https://doi.org/10.1016/j.enpol.2008.09.040	journal	December 2008
The effect of additive manufacturing on global energy demand: An assessment using a bottom-up approach Verhoef, Leendert A.; Budde, Bart W.; Chockalingam, Cindhuja Energy Policy, Vol. 112 https://doi.org/10.1016/j.enpol.2017.10.034	journal	January 2018
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel Yadollahi, Aref; Shamsaei, Nima; Thompson, Scott M. International Journal of Fatigue, Vol. 94 https://doi.org/10.1016/j.ijfatigue.2016.03.014	journal	January 2017
A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes Beretta, S.; Romano, S. International Journal of Fatigue, Vol. 94 https://doi.org/10.1016/j.ijfatigue.2016.06.020	journal	January 2017
An introduction to the fatigue and fracture behavior of additive manufactured parts Daniewicz, S. R.; Shamsaei, Nima International Journal of Fatigue, Vol. 94 https://doi.org/10.1016/j.ijfatigue.2016.07.007	journal	January 2017
Additive manufacturing of fatigue resistant materials: Challenges and opportunities Yadollahi, Aref; Shamsaei, Nima International Journal of Fatigue, Vol. 98 https://doi.org/10.1016/j.ijfatigue.2017.01.001	journal	May 2017
Fatigue characteristics of steels manufactured by selective laser melting Afkhami, Shahriar; Dabiri, Mohammad; Alavi, S. Habib International Journal of Fatigue, Vol. 122 https://doi.org/10.1016/j.ijfatigue.2018.12.029	journal	May 2019
Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure Nezhadfar, P. D.; Burford, Emma; Anderson-Wedge, Kathryn International Journal of Fatigue, Vol. 123 https://doi.org/10.1016/j.ijfatigue.2019.02.015	journal	June 2019
Effect of different graphite materials on the electrical conductivity and flexural strength of bipolar plates fabricated using selective laser sintering Guo, Nannan; Leu, Ming C. International Journal of Hydrogen Energy, Vol. 37, Issue 4 https://doi.org/10.1016/j.ijhydene.2011.11.058	journal	February 2012
Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS) Kunce, I.; Polanski, M.; Bystrzycki, J. International Journal of Hydrogen Energy, Vol. 38, Issue 27 https://doi.org/10.1016/j.ijhydene.2013.05.071	journal	September 2013
Additive manufacturing of liquid/gas diffusion layers for low-cost and high-efficiency hydrogen production Mo, Jingke; Dehoff, Ryan R.; Peter, William H. International Journal of Hydrogen Energy, Vol. 41, Issue 4 https://doi.org/10.1016/j.ijhydene.2015.12.111	journal	January 2016
Towards monolithically printed Mfcs: Development of a 3d-printable membrane electrode assembly (mea) Theodosiou, Pavlina; Greenman, John; Ieropoulos, Ioannis International Journal of Hydrogen Energy, Vol. 44, Issue 9 https://doi.org/10.1016/j.ijhydene.2018.12.163	journal	February 2019
A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique Wei, Luyang; Zhang, Jinjin; Yu, Fangyong International Journal of Hydrogen Energy, Vol. 44, Issue 12 https://doi.org/10.1016/j.ijhydene.2019.01.071	journal	March 2019
Achieving breakthrough performance caused by optimized metal foam flow field in fuel cells Park, Ji Eun; Hwang, Wonchan; Lim, Myung Su International Journal of Hydrogen Energy, Vol. 44, Issue 39 https://doi.org/10.1016/j.ijhydene.2019.06.073	journal	August 2019
Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication Wang, Rui; Zhang, Kai; Davies, Christopher Journal of Alloys and Compounds, Vol. 694 https://doi.org/10.1016/j.jallcom.2016.10.138	journal	February 2017
Characterization of a functionally graded material of Ti-6Al-4V to 304L stainless steel with an intermediate V section Bobbio, Lourdes D.; Bocklund, Brandon; Otis, Richard Journal of Alloys and Compounds, Vol. 742 https://doi.org/10.1016/j.jallcom.2018.01.156	journal	April 2018
Surface roughness analysis, modelling and prediction in selective laser melting Strano, Giovanni; Hao, Liang; Everson, Richard M. Journal of Materials Processing Technology, Vol. 213, Issue 4 https://doi.org/10.1016/j.jmatprotec.2012.11.011	journal	April 2013
Mesoscopic simulation model of selective laser melting of stainless steel powder Khairallah, Saad A.; Anderson, Andy Journal of Materials Processing Technology, Vol. 214, Issue 11 https://doi.org/10.1016/j.jmatprotec.2014.06.001	journal	November 2014
In situ morphology-based defect detection of selective laser melting through inline coherent imaging Kanko, Jordan A.; Sibley, Allison P.; Fraser, James M. Journal of Materials Processing Technology, Vol. 231 https://doi.org/10.1016/j.jmatprotec.2015.12.024	journal	May 2016
3D printed sample holder for in-operando EPR spectroscopy on high temperature polymer electrolyte fuel cells Niemöller, Arvid; Jakes, Peter; Kayser, Steffen Journal of Magnetic Resonance, Vol. 269 https://doi.org/10.1016/j.jmr.2016.06.003	journal	August 2016
Design materials based on simulation results of silicon induced segregation at AlSi10Mg interface fabricated by selective laser melting Ji, Yucheng; Dong, Chaofang; Kong, Decheng Journal of Materials Science & Technology, Vol. 46 https://doi.org/10.1016/j.jmst.2020.01.037	journal	June 2020
Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications Zhong, Yuan; Rännar, Lars-Erik; Liu, Leifeng Journal of Nuclear Materials, Vol. 486 https://doi.org/10.1016/j.jnucmat.2016.12.042	journal	April 2017
Early progress on additive manufacturing of nuclear fuel materials Bergeron, A.; Crigger, J. B. Journal of Nuclear Materials, Vol. 508 https://doi.org/10.1016/j.jnucmat.2018.05.058	journal	September 2018
Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels Song, Miao; Wang, Mi; Lou, Xiaoyuan Journal of Nuclear Materials, Vol. 513 https://doi.org/10.1016/j.jnucmat.2018.10.044	journal	January 2019
Characterizing surrogates to develop an additive manufacturing process for U3Si2 nuclear fuel Rosales, Jhonathan; van Rooyen, Isabella J.; Parga, Clemente J. Journal of Nuclear Materials, Vol. 518 https://doi.org/10.1016/j.jnucmat.2019.02.026	journal	May 2019
Fabrication and characterization of micro PEM fuel cells using pyrolyzed carbon current collector plates Wang, Yun; Pham, Liem; Vasconcellos, Guilherme Porto Salerno de Journal of Power Sources, Vol. 195, Issue 15 https://doi.org/10.1016/j.jpowsour.2010.02.050	journal	August 2010
Development of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery Wang, Zuoqian; Winslow, Rich; Madan, Deepa Journal of Power Sources, Vol. 268 https://doi.org/10.1016/j.jpowsour.2014.06.032	journal	December 2014
Laser additive manufacturing of stainless steel micro fuel cells Scotti, Gianmario; Matilainen, Ville; Kanninen, Petri Journal of Power Sources, Vol. 272 https://doi.org/10.1016/j.jpowsour.2014.08.096	journal	December 2014
Cast and 3D printed ion exchange membranes for monolithic microbial fuel cell fabrication Philamore, Hemma; Rossiter, Jonathan; Walters, Peter Journal of Power Sources, Vol. 289 https://doi.org/10.1016/j.jpowsour.2015.04.113	journal	September 2015
Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology Hinojos, Alejandro; Mireles, Jorge; Reichardt, Ashley Materials & Design, Vol. 94 https://doi.org/10.1016/j.matdes.2016.01.041	journal	March 2016
Characterization of Ti–6Al–4V open cellular foams fabricated by additive manufacturing using electron beam melting Murr, L. E.; Gaytan, S. M.; Medina, F. Materials Science and Engineering: A, Vol. 527, Issue 7-8 https://doi.org/10.1016/j.msea.2009.11.015	journal	March 2010
Open-cellular copper structures fabricated by additive manufacturing using electron beam melting Ramirez, D. A.; Murr, L. E.; Li, S. J. Materials Science and Engineering: A, Vol. 528, Issue 16-17 https://doi.org/10.1016/j.msea.2011.03.053	journal	June 2011
Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted Al x CoCrFeNi high entropy alloys Joseph, Jithin; Jarvis, Tom; Wu, Xinhua Materials Science and Engineering: A, Vol. 633 https://doi.org/10.1016/j.msea.2015.02.072	journal	May 2015
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel Yadollahi, Aref; Shamsaei, Nima; Thompson, Scott M. Materials Science and Engineering: A, Vol. 644 https://doi.org/10.1016/j.msea.2015.07.056	journal	September 2015
In-situ formation of ceramic layer on Mo-based composites via laser powder bed fusion Zhou, Weiwei; Kikuchi, Keiko; Nomura, Naoyuki Materialia, Vol. 10 https://doi.org/10.1016/j.mtla.2020.100655	journal	May 2020
Dispersion of carbon nanotubes in aluminum improves radiation resistance So, Kang Pyo; Chen, Di; Kushima, Akihiro Nano Energy, Vol. 22 https://doi.org/10.1016/j.nanoen.2016.01.019	journal	April 2016
Inkjet-printed silicon as high performance anodes for Li-ion batteries Lawes, Stephen; Sun, Qian; Lushington, Andrew Nano Energy, Vol. 36 https://doi.org/10.1016/j.nanoen.2017.04.041	journal	June 2017
Feedback control of Layerwise Laser Melting using optical sensors Craeghs, Tom; Bechmann, Florian; Berumen, Sebastian Physics Procedia, Vol. 5 https://doi.org/10.1016/j.phpro.2010.08.078	journal	January 2010
Quality control of laser- and powder bed-based Additive Manufacturing (AM) technologies Berumen, Sebastian; Bechmann, Florian; Lindner, Stefan Physics Procedia, Vol. 5 https://doi.org/10.1016/j.phpro.2010.08.089	journal	January 2010
Simulation of Laser Beam Melting of Steel Powders using the Three-Dimensional Volume of Fluid Method Gürtler, F. -J.; Karg, M.; Leitz, K. -H. Physics Procedia, Vol. 41 https://doi.org/10.1016/j.phpro.2013.03.162	journal	January 2013
Crack Propagation in Additive Manufactured Materials and Structures Riemer, Andre; Richard, Hans Albert Procedia Structural Integrity, Vol. 2 https://doi.org/10.1016/j.prostr.2016.06.157	journal	January 2016
Direct laser deposition cladding of Al CoCrFeNi high entropy alloys on a high-temperature stainless steel Chao, Qi; Guo, Tingting; Jarvis, Tom Surface and Coatings Technology, Vol. 332 https://doi.org/10.1016/j.surfcoat.2017.09.072	journal	December 2017
A metal additively manufactured (MAM) heat exchanger for electric motor thermal control on a high-altitude solar aircraft – Experimental characterisation Wrobel, Rafal; Scholes, Ben; Hussein, Ahmed Thermal Science and Engineering Progress, Vol. 19 https://doi.org/10.1016/j.tsep.2020.100629	journal	October 2020
Electrochemical properties of LiCoO2 thin film electrode prepared by ink-jet printing technique Huang, Junjie; Yang, Jianjun; Li, Wenrong Thin Solid Films, Vol. 516, Issue 10 https://doi.org/10.1016/j.tsf.2007.09.039	journal	March 2008
Laser Additive Manufacturing using directed energy deposition of Inconel-718 wall structures with tailored characteristics Jinoop, A. N.; Paul, C. P.; Mishra, S. K. Vacuum, Vol. 166 https://doi.org/10.1016/j.vacuum.2019.05.027	journal	August 2019
Cost-Effective Three-Dimensional Printing of Visibly Transparent Microchips within Minutes Shallan, Aliaa I.; Smejkal, Petr; Corban, Monika Analytical Chemistry, Vol. 86, Issue 6 https://doi.org/10.1021/ac4041857	journal	February 2014
Highly Loaded Graphite–Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing Maurel, Alexis; Courty, Matthieu; Fleutot, Benoit Chemistry of Materials, Vol. 30, Issue 21 https://doi.org/10.1021/acs.chemmater.8b02062	journal	October 2018
Creasable Batteries: Understanding Failure Modes through Dynamic Electrochemical Mechanical Testing Blake, Aaron J.; Kohlmeyer, Ryan R.; Drummy, Lawrence F. ACS Applied Materials & Interfaces, Vol. 8, Issue 8 https://doi.org/10.1021/acsami.5b11175	journal	January 2016
Multimaterial 3D-Printed Water Electrolyzer with Earth-Abundant Electrodeposited Catalysts Ambrosi, Adriano; Pumera, Martin ACS Sustainable Chemistry & Engineering, Vol. 6, Issue 12 https://doi.org/10.1021/acssuschemeng.8b04327	journal	November 2018
Thin, Flexible Secondary Li-Ion Paper Batteries Hu, Liangbing; Wu, Hui; La Mantia, Fabio ACS Nano, Vol. 4, Issue 10, p. 5843-5848 https://doi.org/10.1021/nn1018158	journal	September 2010
Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells Chaudhuri, Swades K.; Lovley, Derek R. Nature Biotechnology, Vol. 21, Issue 10 https://doi.org/10.1038/nbt867	journal	September 2003
High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes Pikul, James H.; Gang Zhang, Hui; Cho, Jiung Nature Communications, Vol. 4, Article No. 1732 https://doi.org/10.1038/ncomms2747	journal	April 2013
Closing the Nuclear Fuel Cycle with a Simplified Minor Actinide Lanthanide Separation Process (ALSEP) and Additive Manufacturing Gelis, Artem V.; Kozak, Peter; Breshears, Andrew T. Scientific Reports, Vol. 9, Issue 1 https://doi.org/10.1038/s41598-019-48619-x	journal	September 2019
Additive Manufacturing of a Microbial Fuel Cell—A detailed study Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego Scientific Reports, Vol. 5, Issue 1 https://doi.org/10.1038/srep17373	journal	November 2015
Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices Au, Anthony K.; Lee, Wonjae; Folch, Albert Lab Chip, Vol. 14, Issue 7 https://doi.org/10.1039/C3LC51360B	journal	January 2014
Composite batteries: a simple yet universal approach to 3D printable lithium-ion battery electrodes Kohlmeyer, Ryan R.; Blake, Aaron J.; Hardin, James O. Journal of Materials Chemistry A, Vol. 4, Issue 43 https://doi.org/10.1039/C6TA07610F	journal	January 2016
A review on additive manufacturing and its way into the oil and gas industry Sireesha, Merum; Lee, Jeremy; Kranthi Kiran, A. Sandeep RSC Advances, Vol. 8, Issue 40 https://doi.org/10.1039/C8RA03194K	journal	January 2018
Single step additive manufacturing (3D printing) of electrocatalytic anodes and cathodes for efficient water splitting Hughes, Jack P.; dos Santos, Pãmyla L.; Down, Michael P. Sustainable Energy & Fuels, Vol. 4, Issue 1 https://doi.org/10.1039/C9SE00679F	journal	January 2020
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges King, W. E.; Anderson, A. T.; Ferencz, R. M. Applied Physics Reviews, Vol. 2, Issue 4 https://doi.org/10.1063/1.4937809	journal	December 2015
Dimensionless numbers in additive manufacturing Mukherjee, T.; Manvatkar, V.; De, A. Journal of Applied Physics, Vol. 121, Issue 6 https://doi.org/10.1063/1.4976006	journal	February 2017
Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods Klassen, Alexander; Scharowsky, Thorsten; Körner, Carolin Journal of Physics D: Applied Physics, Vol. 47, Issue 27 https://doi.org/10.1088/0022-3727/47/27/275303	journal	June 2014
Direct write dispenser printing of a zinc microbattery with an ionic liquid gel electrolyte Ho, C. C.; Evans, J. W.; Wright, P. K. Journal of Micromechanics and Microengineering, Vol. 20, Issue 10 https://doi.org/10.1088/0960-1317/20/10/104009	journal	September 2010
Scalable fabrication of carbon-based MEMS/NEMS and their applications: a review Jiang, Shulan; Shi, Tielin; Zhan, Xiaobin Journal of Micromechanics and Microengineering, Vol. 25, Issue 11 https://doi.org/10.1088/0960-1317/25/11/113001	journal	September 2015
Simulations and generalized model of the effect of filler size dispersity on electrical percolation in rod networks Mutiso, Rose M.; Sherrott, Michelle C.; Li, Ju Physical Review B, Vol. 86, Issue 21, Article No. 214306 https://doi.org/10.1103/PhysRevB.86.214306	journal	December 2012
Lattice Boltzmann model for simulating flows with multiple phases and components Shan, Xiaowen; Chen, Hudong Physical Review E, Vol. 47, Issue 3 https://doi.org/10.1103/PhysRevE.47.1815	journal	March 1993
Development of SLS fuel cell current collectors Chen, Ssuwei; Murphy, Jeremy; Herlehy, Jason Rapid Prototyping Journal, Vol. 12, Issue 5 https://doi.org/10.1108/13552540610707031	journal	October 2006
Fabrication of modified graphite bipolar plates by indirect selective laser sintering (SLS) for direct methanol fuel cells Alayavalli, Kaushik; Bourell, David L. Rapid Prototyping Journal, Vol. 16, Issue 4 https://doi.org/10.1108/13552541011049289	journal	June 2010
Advanced manufacturing concepts for crystalline silicon solar cells Nijs, J. F.; Szlufcik, J.; Poortmans, J. IEEE Transactions on Electron Devices, Vol. 46, Issue 10 https://doi.org/10.1109/16.791983	journal	January 1999
Thermal Modeling of Electron Beam Additive Manufacturing Process: Powder Sintering Effects Shen, Ninggang; Chou, Kevin ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing https://doi.org/10.1115/MSEC2012-7253	conference	July 2013
Multiscale Modeling of Powder Bed–Based Additive Manufacturing Markl, Matthias; Körner, Carolin Annual Review of Materials Research, Vol. 46, Issue 1 https://doi.org/10.1146/annurev-matsci-070115-032158	journal	July 2016
Porous-Media Flow Fields for Polymer Electrolyte Fuel Cells Wang, Yun Journal of The Electrochemical Society, Vol. 156, Issue 10 https://doi.org/10.1149/1.3183781	journal	January 2009
Porous-Media Flow Fields for Polymer Electrolyte Fuel Cells Wang, Yun Journal of The Electrochemical Society, Vol. 156, Issue 10 https://doi.org/10.1149/1.3183785	journal	January 2009
Performance and Limitations of 3D-Printed Bipolar Plates in Fuel Cells Gould, Benjamin D.; Rodgers, Joseph A.; Schuette, Michael ECS Journal of Solid State Science and Technology, Vol. 4, Issue 4 https://doi.org/10.1149/2.0091504jss	journal	January 2015
Two-Phase Flow Dynamics in the Gas Diffusion Layer of Proton Exchange Membrane Fuel Cells: Volume of Fluid Modeling and Comparison with Experiment Niu, Zhiqiang; Wang, Yun; Jiao, Kui Journal of The Electrochemical Society, Vol. 165, Issue 9 https://doi.org/10.1149/2.0261809jes	journal	January 2018
Toyota MIRAI Fuel Cell Vehicle and Progress Toward a Future Hydrogen Society Yoshida, T.; Kojima, K. Interface magazine, Vol. 24, Issue 2 https://doi.org/10.1149/2.F03152if	journal	January 2015
Additive Manufacturing: Rethinking Battery Design Cobb, C. L.; Ho, C. C. Interface magazine, Vol. 25, Issue 1 https://doi.org/10.1149/2.F08161if	journal	January 2016
New general double ellipsoid heat source model Hongyuan, Fang; Qingguo, Meng; Wenli, Xu Science and Technology of Welding and Joining, Vol. 10, Issue 3 https://doi.org/10.1179/174329305X40705	journal	June 2005
3D Printing in the Oil Field Kicks Into Production Mode Jacobs, Trent Journal of Petroleum Technology, Vol. 68, Issue 08 https://doi.org/10.2118/0816-0030-JPT	journal	August 2016
Functionally graded copper – steel using laser engineered net shaping™ process Noecker, Fredrick F.; DuPont, John N. International Congress on Applications of Lasers & Electro-Optics https://doi.org/10.2351/1.5066217	conference	January 2002
Comprehensive Optical Monitoring of Selective Laser Melting Doubenskaia, M. Journal of Laser Micro/Nanoengineering, Vol. 7, Issue 3 https://doi.org/10.2961/jlmn.2012.03.0001	journal	November 2012
Molecular dynamics simulations for the examination of mechanical properties of hydroxyapatite/ poly α-n-butyl cyanoacrylate under additive manufacturing Wang, Yanen; Wei, Qinghua; Pan, Feilong Bio-Medical Materials and Engineering, Vol. 24, Issue 1 https://doi.org/10.3233/BME-130874	journal	January 2014
A novel microbial fuel cell with exchangeable membrane – application of additive manufacturing technology for device fabrication Zawadzki, Dawid; Pędziwiatr, Paulina; Michalska, Karina Acta Innovations, Issue 28 https://doi.org/10.32933/ActaInnovations.28.3	journal	July 2018
Application of 3D Printed Porous Copper Anode in Microbial Fuel Cells Bian, Bin; Wang, Chunguang; Hu, Mingjun Frontiers in Energy Research, Vol. 6 https://doi.org/10.3389/fenrg.2018.00050	journal	June 2018
Enzymatic Fuel Cells: Towards Self-Powered Implantable and Wearable Diagnostics Gonzalez-Solino, Carla; Lorenzo, Mirella Biosensors, Vol. 8, Issue 1 https://doi.org/10.3390/bios8010011	journal	January 2018
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design Dass, Adrita; Moridi, Atieh Coatings, Vol. 9, Issue 7 https://doi.org/10.3390/coatings9070418	journal	June 2019
Melt Pool and Single Track Formation in Selective Laser Sintering/Selective Laser Melting Alkahari, Mohd Rizal; Furumoto, Tatsuaki; Ueda, Takashi Advanced Materials Research, Vol. 933 https://doi.org/10.4028/www.scientific.net/AMR.933.196	journal	May 2014
Optical System for On-Line Monitoring and Temperature Control in Selective Laser Melting Technology Doubenskaia, Maria; Pavlov, Mikhail; Chivel, Yuri Key Engineering Materials, Vol. 437 https://doi.org/10.4028/www.scientific.net/KEM.437.458	journal	May 2010
Mechanical Properties of Austenitic Stainless Steel Made by Additive Manufacturing Luecke, William E.; Slotwinski, John A. Journal of Research of the National Institute of Standards and Technology, Vol. 119 https://doi.org/10.6028/jres.119.015	journal	January 2014

Similar Records

Additive manufacturing of soft magnets for electrical machines—a review

Journal Article · Mon Nov 30 19:00:00 EST 2020 · Materials Today Physics · OSTI ID:1646511

Aerogels, additive manufacturing, and energy storage

Journal Article · Sun Apr 30 20:00:00 EDT 2023 · Joule · OSTI ID:2377801

Invited review: Machine learning for materials developments in metals additive manufacturing

Journal Article · Mon Nov 30 19:00:00 EST 2020 · Additive Manufacturing · OSTI ID:1712807

Additive manufacturing for energy: A review

Citation Formats

References (125)

Similar Records

Related Subjects