Quantification of melt pool dynamics and microstructure during simulated additive manufacturing

Lamb, James; Ochoa, Ruben; Eres-Castellanos, Adriana; Klemm-Toole, Jonah; Echlin, McLean P.; Sun, Tao; Fezzaa, Kamel; Clarke, Amy; Pollock, Tresa M.

doi:10.1016/j.scriptamat.2024.116036

Quantification of melt pool dynamics and microstructure during simulated additive manufacturing

Journal Article · Wed May 01 00:00:00 UTC 2024 · Scripta Materialia

DOI:https://doi.org/10.1016/j.scriptamat.2024.116036· OSTI ID:2319075

; ; ; ; ; ; Fezzaa, Kamel; Clarke, Amy; Pollock, Tresa M.

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE

OSTI ID:: 2319075

Journal Information:: Scripta Materialia, Journal Name: Scripta Materialia Journal Issue: C Vol. 245; ISSN 1359-6462

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (57)

Surface recrystallization in a single crystal nickel-based superalloy Bond, S. D.; Martin, J. W. Journal of Materials Science, Vol. 19, Issue 12 https://doi.org/10.1007/BF00980749	journal	December 1984
Modeling microstructural development during the forging of Waspaloy Shen, Gangshu; Semiatin, S. L.; Shivpuri, Rajiv Metallurgical and Materials Transactions A, Vol. 26, Issue 7 https://doi.org/10.1007/BF02670767	journal	July 1995
Boundary characterization using 3D mapping of geometrically necessary dislocations in AM Ta microstructure Witzen, Wyatt A.; Polonsky, Andrew T.; Rottmann, Paul F. Journal of Materials Science, Vol. 57, Issue 21 https://doi.org/10.1007/s10853-022-07074-2	journal	March 2022
Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing Lass, Eric A.; Stoudt, Mark R.; Williams, Maureen E. Metallurgical and Materials Transactions A, Vol. 48, Issue 11 https://doi.org/10.1007/s11661-017-4304-6	journal	August 2017
Design and Tailoring of Alloys for Additive Manufacturing Pollock, T. M.; Clarke, A. J.; Babu, S. S. Metallurgical and Materials Transactions A, Vol. 51, Issue 12 https://doi.org/10.1007/s11661-020-06009-3	journal	October 2020
Solidification Microstructure of Aluminum AA 6016-T4 Resistance Spot Welds Using a Short-Pulse Technique Schulz, Eric W.; Wagner, Matthias; Schubert, Holger Metallurgical and Materials Transactions A, Vol. 52, Issue 11 https://doi.org/10.1007/s11661-021-06431-1	journal	September 2021
Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing McKeown, Joseph T.; Zweiacker, Kai; Liu, Can JOM, Vol. 68, Issue 3 https://doi.org/10.1007/s11837-015-1793-x	journal	January 2016
Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties Kirka, M. M.; Unocic, K. A.; Raghavan, N. JOM, Vol. 68, Issue 3 https://doi.org/10.1007/s11837-016-1812-6	journal	February 2016
Recent Developments in Femtosecond Laser-Enabled TriBeam Systems Echlin, McLean P.; Polonsky, Andrew T.; Lamb, James JOM, Vol. 73, Issue 12 https://doi.org/10.1007/s11837-021-04919-0	journal	November 2021
Some geometrical relations in dislocated crystals Nye, J. F. Acta Metallurgica, Vol. 1, Issue 2 https://doi.org/10.1016/0001-6160(53)90054-6	journal	March 1953
Theory of microstructural development during rapid solidification Kurz, W.; Giovanola, B.; Trivedi, R. Acta Metallurgica, Vol. 34, Issue 5 https://doi.org/10.1016/0001-6160(86)90056-8	journal	May 1986
Recrystallization of nickel-270 Houston, J. T.; Farrell, K. Metallography, Vol. 2, Issue 2-3 https://doi.org/10.1016/0026-0800(69)90086-X	journal	September 1969
Nucleation ahead of the advancing interface in directional solidification Gäumann, M.; Trivedi, R.; Kurz, W. Materials Science and Engineering: A, Vol. 226-228 https://doi.org/10.1016/S0921-5093(97)80081-0	journal	June 1997
Determination of matrix and precipitate elastic constants in (γ–γ′) Ni-base model alloys, and their relevance to rafting Fahrmann, M.; Hermann, W.; Fahrmann, E. Materials Science and Engineering: A, Vol. 260, Issue 1-2 https://doi.org/10.1016/S0921-5093(98)00953-8	journal	February 1999
Epitaxial laser metal forming: analysis of microstructure formation Gäumann, M.; Henry, S.; Cléton, F. Materials Science and Engineering: A, Vol. 271, Issue 1-2 https://doi.org/10.1016/S0921-5093(99)00202-6	journal	November 1999
The machinability of nickel-based alloys: a review Ezugwu, E. O.; Wang, Z. M.; Machado, A. R. Journal of Materials Processing Technology, Vol. 86, Issue 1-3 https://doi.org/10.1016/S0924-0136(98)00314-8	journal	February 1999
Surface Recrystallization in Nickel Base Single Crystal Superalloy DD6 Jichun, Xiong; Jiarong, Li; Shizhong, Liu Chinese Journal of Aeronautics, Vol. 23, Issue 4 https://doi.org/10.1016/S1000-9361(09)60244-2	journal	August 2010
Single-crystal laser deposition of superalloys: processing–microstructure maps Gäumann, M.; Bezençon, C.; Canalis, P. Acta Materialia, Vol. 49, Issue 6 https://doi.org/10.1016/S1359-6454(00)00367-0	journal	April 2001
Columnar to equiaxed transition in solidification processing Kurz, W.; Bezençon, C.; Gäumann, M. Science and Technology of Advanced Materials, Vol. 2, Issue 1 https://doi.org/10.1016/S1468-6996(01)00047-X	journal	January 2001
In situ transmission electron microscopy of crystal growth-mode transitions during rapid solidification of a hypoeutectic Al–Cu alloy McKeown, Joseph T.; Kulovits, Andreas K.; Liu, Can Acta Materialia, Vol. 65 https://doi.org/10.1016/j.actamat.2013.11.046	journal	February 2014
A criterion for cracking during solidification Kou, Sindo Acta Materialia, Vol. 88 https://doi.org/10.1016/j.actamat.2015.01.034	journal	April 2015
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander Acta Materialia, Vol. 108 https://doi.org/10.1016/j.actamat.2016.02.014	journal	April 2016
Microstructure selection in thin-sample directional solidification of an Al-Cu alloy: In situ X-ray imaging and phase-field simulations Clarke, A. J.; Tourret, D.; Song, Y. Acta Materialia, Vol. 129 https://doi.org/10.1016/j.actamat.2017.02.047	journal	May 2017
Investigation of strengthening mechanisms in an additively manufactured Haynes 230 alloy Yang, Bo; Shang, Z.; Ding, Jie Acta Materialia, Vol. 222 https://doi.org/10.1016/j.actamat.2021.117404	journal	January 2022
Morphological stability of solid-liquid interfaces under additive manufacturing conditions Tourret, Damien; Klemm-Toole, Jonah; Castellanos, Adriana Eres Acta Materialia, Vol. 250 https://doi.org/10.1016/j.actamat.2023.118858	journal	May 2023
Application of Kolmogorov–Johnson–Mehl–Avrami equations to non-isothermal conditions Martin, David Computational Materials Science, Vol. 47, Issue 3 https://doi.org/10.1016/j.commatsci.2009.11.005	journal	January 2010
A sensitivity analysis of the columnar-to-equiaxed transition for Ni-based superalloys in electron beam additive manufacturing Haines, M.; Plotkowski, A.; Frederick, C. L. Computational Materials Science, Vol. 155 https://doi.org/10.1016/j.commatsci.2018.08.064	journal	December 2018
Modeling columnar to equiaxed transition in directional solidification of Inconel 718 alloy Lenart, Ryan; Eshraghi, Mohsen Computational Materials Science, Vol. 172 https://doi.org/10.1016/j.commatsci.2019.109374	journal	February 2020
Selective laser melting of Hastelloy X nanocomposite: Effects of TiC reinforcement on crack elimination and strength improvement Han, Quanquan; Gu, Yuchen; Huang, Jun Composites Part B: Engineering, Vol. 202 https://doi.org/10.1016/j.compositesb.2020.108442	journal	December 2020
A methodology to integrate melt pool convection with rapid solidification and undercooling kinetics in laser spot welding Patel, Sushil; Reddy, Pradeep; Kumar, Arvind International Journal of Heat and Mass Transfer, Vol. 164 https://doi.org/10.1016/j.ijheatmasstransfer.2020.120575	journal	January 2021
Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718 Witzen, Wyatt A.; Polonsky, Andrew T.; Pollock, Tresa M. International Journal of Plasticity, Vol. 131 https://doi.org/10.1016/j.ijplas.2020.102709	journal	August 2020
Relation of microstructure, microhardness and underlying thermodynamics in molten pools of laser melting deposition processed TiC/Inconel 625 composites Cao, Sainan; Gu, Dongdong; Shi, Qimin Journal of Alloys and Compounds, Vol. 692 https://doi.org/10.1016/j.jallcom.2016.09.098	journal	January 2017
Microstructure formed during selective laser melting of IN738LC in keyhole mode Guraya, T.; Singamneni, S.; Chen, Z. W. Journal of Alloys and Compounds, Vol. 792 https://doi.org/10.1016/j.jallcom.2019.03.419	journal	July 2019
Insight to agglomeration and chemical reactions of CoAl2O4 inoculants in IN718 processed by selective laser melting Ho, I-Ting; Chang, Kai-Chun; Tiparti, Dhruv Journal of Alloys and Compounds, Vol. 883 https://doi.org/10.1016/j.jallcom.2021.160753	journal	November 2021
On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder bed fusion: Towards textural design Moyle, M. S.; Haghdadi, N.; Liao, X. Z. Journal of Materials Science & Technology, Vol. 117 https://doi.org/10.1016/j.jmst.2021.12.015	journal	August 2022
The TriBeam system: Femtosecond laser ablation in situ SEM Echlin, McLean P.; Straw, Marcus; Randolph, Steven Materials Characterization, Vol. 100 https://doi.org/10.1016/j.matchar.2014.10.023	journal	February 2015
Selective laser melting of stainless steel 316L with low porosity and high build rates Sun, Zhongji; Tan, Xipeng; Tor, Shu Beng Materials & Design, Vol. 104 https://doi.org/10.1016/j.matdes.2016.05.035	journal	August 2016
Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM Zhang, Baicheng; Bi, Guijun; Wang, Pei Materials & Design, Vol. 111 https://doi.org/10.1016/j.matdes.2016.08.078	journal	December 2016
Effect of processing parameters on microstructure of laser solid forming Inconel 718 superalloy Zhu, L.; Xu, Z. F.; Liu, P. Optics & Laser Technology, Vol. 98 https://doi.org/10.1016/j.optlastec.2017.08.027	journal	January 2018
Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing Han, Quanquan; Gu, Yuchen; Soe, Shwe Optics & Laser Technology, Vol. 124 https://doi.org/10.1016/j.optlastec.2019.105984	journal	April 2020
New insights into the origin of fine equiaxed microstructures in additively manufactured Inconel 718 Cazic, I.; Zollinger, J.; Mathieu, S. Scripta Materialia, Vol. 195 https://doi.org/10.1016/j.scriptamat.2021.113740	journal	April 2021
A spherical harmonic transform approach to the indexing of electron back-scattered diffraction patterns Lenthe, W. C.; Singh, S.; Graef, M. De Ultramicroscopy, Vol. 207 https://doi.org/10.1016/j.ultramic.2019.112841	journal	December 2019
Fiji: an open-source platform for biological-image analysis Schindelin, Johannes; Arganda-Carreras, Ignacio; Frise, Erwin Nature Methods, Vol. 9, Issue 7 https://doi.org/10.1038/nmeth.2019	journal	June 2012
A critical look at the prediction of the temperature field around a laser-induced melt pool on metallic substrates Shu, Yi; Galles, Daniel; Tertuliano, Ottman A. Scientific Reports, Vol. 11, Issue 1 https://doi.org/10.1038/s41598-021-91039-z	journal	June 2021
A new TriBeam system for three-dimensional multimodal materials analysis Echlin, McLean P.; Mottura, Alessandro; Torbet, Christopher J. Review of Scientific Instruments, Vol. 83, Issue 2 https://doi.org/10.1063/1.3680111	journal	February 2012
The metallurgy and processing science of metal additive manufacturing Sames, W. J.; List, F. A.; Pannala, S. International Materials Reviews, Vol. 61, Issue 5 https://doi.org/10.1080/09506608.2015.1116649	journal	March 2016
Kinetics of recrystallization and microstructure distribution during isothermal annealing of cold rolled nickel Jahani, N.; Reihanian, M.; Gheisari, Kh Materials Research Express, Vol. 6, Issue 9 https://doi.org/10.1088/2053-1591/ab2b29	journal	June 2019
In situ femtosecond pulse laser ablation for large volume 3D analysis in scanning electron microscope systems Randolph, Steven Jeffrey; Filevich, Jorge; Botman, Aurelien Journal of Vacuum Science & Technology B, Vol. 36, Issue 6 https://doi.org/10.1116/1.5047806	journal	November 2018
Site specific control of crystallographic grain orientation through electron beam additive manufacturing Dehoff, R. R.; Kirka, M. M.; Sames, W. J. Materials Science and Technology, Vol. 31, Issue 8 https://doi.org/10.1179/1743284714Y.0000000734	journal	November 2014
DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D Groeber, Michael A.; Jackson, Michael A. Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1 https://doi.org/10.1186/2193-9772-3-5	journal	April 2014
Additive manufacturing of materials: Opportunities and challenges Babu, S. S.; Love, L.; Dehoff, R. MRS Bulletin, Vol. 40, Issue 12 https://doi.org/10.1557/mrs.2015.234	journal	November 2015
Imaging transient solidification behavior McKeown, Joseph T.; Clarke, Amy J.; Wiezorek, Jörg M. K. MRS Bulletin, Vol. 45, Issue 11 https://doi.org/10.1557/mrs.2020.273	journal	November 2020
Multiple reflection and its influence on keyhole evolution Ki, Hyungson; Mohanty, Pravansu S.; Mazumder, Jyotirmoy Journal of Laser Applications, Vol. 14, Issue 1 https://doi.org/10.2351/1.1449885	journal	February 2002
Metallic vapor ejection effect on melt pool dynamics in deep penetration laser welding Fabbro, Rémy; Hamadou, Mohammed; Coste, Frederic Journal of Laser Applications, Vol. 16, Issue 1 https://doi.org/10.2351/1.1642633	journal	February 2004
Heat transfer and fluid flow in additive manufacturing Raghavan, A.; Wei, H. L.; Palmer, T. A. Journal of Laser Applications, Vol. 25, Issue 5 https://doi.org/10.2351/1.4817788	journal	November 2013
Full-Field Mapping and Flow Quantification of Melt Pool Dynamics in Laser Powder Bed Fusion of SS316L Ur Rehman, Asif; Pitir, Fatih; Salamci, Metin Materials, Vol. 14, Issue 21 https://doi.org/10.3390/ma14216264	journal	October 2021
In Situ X-ray Radiography and Computational Modeling to Predict Grain Morphology in β-Titanium during Simulated Additive Manufacturing Jasien, Chris; Saville, Alec; Becker, Chandler Gus Metals, Vol. 12, Issue 7 https://doi.org/10.3390/met12071217	journal	July 2022

Similar Records

Calibrating uncertain parameters in melt pool simulations of additive manufacturing

Journal Article · Wed Nov 23 00:00:00 UTC 2022 · Computational Materials Science · OSTI ID:1901636

Bayesian inverse uncertainty quantification of a MOOSE-based melt pool model for additive manufacturing using experimental data

Journal Article · Sat Jan 01 00:00:00 UTC 2022 · Annals of Nuclear Energy (Oxford) · OSTI ID:1830036

Quantification of porosity and microstructure and their effect on quasi-static and dynamic behavior of additively manufactured Inconel 718

Journal Article · Sat Aug 01 00:00:00 UTC 2020 · Additive Manufacturing · OSTI ID:2007231

Quantification of melt pool dynamics and microstructure during simulated additive manufacturing

Citation Formats

References (57)

Similar Records

Related Subjects