Synchrotron based investigation of anisotropy and microstructure of wire arc additive manufactured Grade 91 steel

Robin, Ishtiaque K.; Sprouster, David J.; Sridharan, Niyanth; Snead, Lance L.; Zinkle, Steven J.

doi:10.1016/j.jmrt.2024.02.230

Synchrotron based investigation of anisotropy and microstructure of wire arc additive manufactured Grade 91 steel

Journal Article · Thu Feb 29 23:00:00 EST 2024 · Journal of Materials Research and Technology

DOI:https://doi.org/10.1016/j.jmrt.2024.02.230· OSTI ID:2317699

; ; Sridharan, Niyanth; Snead, Lance L.; Zinkle, Steven J.

Not Available

View Journal Article

Sponsoring Organization:: USDOE Office of Science (SC), Fusion Energy Sciences (FES)

Grant/Contract Number:: SC0023293; SC0012704; SC0018322

OSTI ID:: 2317699

Journal Information:: Journal of Materials Research and Technology, Journal Name: Journal of Materials Research and Technology Journal Issue: C Vol. 29; ISSN 2238-7854

Publisher:: ElsevierCopyright Statement

Country of Publication:: Brazil

Language:: English

References (67)

Stereolithography of SiOC Ceramic Microcomponents Zanchetta, Erika; Cattaldo, Marco; Franchin, Giorgia Advanced Materials, Vol. 28, Issue 2 https://doi.org/10.1002/adma.201503470	journal	November 2015
Influence of austenite and martensite strength on martensite morphology Davies, R. G.; Magee, C. L. Metallurgical Transactions, Vol. 2, Issue 7 https://doi.org/10.1007/BF02913427	journal	July 1971
Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization Kelly, S. M.; Kampe, S. L. Metallurgical and Materials Transactions A, Vol. 35, Issue 6 https://doi.org/10.1007/s11661-004-0094-8	journal	June 2004
In-situ observations of lattice parameter fluctuations in austenite and transformation to bainite Babu, S. S.; Specht, E. D.; David, S. A. Metallurgical and Materials Transactions A, Vol. 36, Issue 12 https://doi.org/10.1007/s11661-005-0002-x	journal	December 2005
Characterization of Microstructures across the Heat-Affected Zone of the Modified 9Cr-1Mo Weld Joint to Understand Its Role in Promoting Type IV Cracking Laha, K.; Chandravathi, K. S.; Parameswaran, P. Metallurgical and Materials Transactions A, Vol. 38, Issue 1 https://doi.org/10.1007/s11661-006-9050-0	journal	January 2007
Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process Tian, Yuan; McAllister, Donald; Colijn, Hendrik Metallurgical and Materials Transactions A, Vol. 45, Issue 10 https://doi.org/10.1007/s11661-014-2370-6	journal	June 2014
High Temperature Uniaxial Compression and Stress–Relaxation Behavior of India-Specific RAFM Steel Shah, Naimish S.; Sunil, Saurav; Sarkar, Apu Metallurgical and Materials Transactions A, Vol. 49, Issue 7 https://doi.org/10.1007/s11661-018-4641-0	journal	May 2018
Arc-Erosion Behavior of Boric Oxide-Reinforced Silver-Based Electrical Contact Materials Produced by Mechanical Alloying Biyik, Serkan; Arslan, Fazli; Aydin, Murat Journal of Electronic Materials, Vol. 44, Issue 1 https://doi.org/10.1007/s11664-014-3399-4	journal	September 2014
Metal Additive Manufacturing: A Review Frazier, William E. Journal of Materials Engineering and Performance, Vol. 23, Issue 6 https://doi.org/10.1007/s11665-014-0958-z	journal	April 2014
Transformation and tempering behavior of 12Cr-1Mo-0.3V martensitic stainless steel weldments Lippold, John C. Journal of Nuclear Materials, Vol. 104 https://doi.org/10.1016/0022-3115(82)90752-8	journal	January 1981
Development of an extensive database of mechanical and physical properties for reduced-activation martensitic steel F82H Jitsukawa, S.; Tamura, M.; van der Schaaf, B. Journal of Nuclear Materials, Vol. 307-311 https://doi.org/10.1016/S0022-3115(02)01075-9	journal	December 2002
Thermo-Calc & DICTRA, computational tools for materials science Andersson, J-O; Helander, Thomas; Höglund, Lars Calphad, Vol. 26, Issue 2 https://doi.org/10.1016/S0364-5916(02)00037-8	journal	June 2002
The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating Güler, Onur; Varol, Temel; Alver, Ümit Advanced Powder Technology, Vol. 32, Issue 8 https://doi.org/10.1016/j.apt.2021.05.053	journal	August 2021
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling Ning, Fuda; Cong, Weilong; Qiu, Jingjing Composites Part B: Engineering, Vol. 80 https://doi.org/10.1016/j.compositesb.2015.06.013	journal	October 2015
High-strength epoxy nanocomposites for 3D printing Hmeidat, Nadim S.; Kemp, James W.; Compton, Brett G. Composites Science and Technology, Vol. 160 https://doi.org/10.1016/j.compscitech.2018.03.008	journal	May 2018
Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak Kondo, Masatoshi; Nagasaka, Takuya; Xu, Qi Fusion Engineering and Design, Vol. 84, Issue 7-11, p. 1081-1085 https://doi.org/10.1016/j.fusengdes.2009.02.046	journal	June 2009
Development of EUROFER97 database and material property handbook Gaganidze, Ermile; Gillemot, Ferenc; Szenthe, Ildiko Fusion Engineering and Design, Vol. 135 https://doi.org/10.1016/j.fusengdes.2018.06.027	journal	October 2018
Recent progress of R&D activities on reduced activation ferritic/martensitic steel (CLF-1) Liao, Hongbin; Wang, Xiaoyu; Yang, Guoping Fusion Engineering and Design, Vol. 147 https://doi.org/10.1016/j.fusengdes.2019.06.008	journal	October 2019
Elemental segregation in an AlCoCrFeNi high-entropy alloy – A comparison between selective laser melting and induction melting Karlsson, Dennis; Marshal, Amalraj; Johansson, Filip Journal of Alloys and Compounds, Vol. 784 https://doi.org/10.1016/j.jallcom.2018.12.267	journal	May 2019
Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V Martina, F.; Mehnen, J.; Williams, S. W. Journal of Materials Processing Technology, Vol. 212, Issue 6 https://doi.org/10.1016/j.jmatprotec.2012.02.002	journal	June 2012
Experimental and numerical analysis of the selective laser sintering (SLS) of PA12 and PEKK semi-crystalline polymers Peyre, Patrice; Rouchausse, Yann; Defauchy, Denis Journal of Materials Processing Technology, Vol. 225 https://doi.org/10.1016/j.jmatprotec.2015.04.030	journal	November 2015
Characterization of an ASTM A335 P91 ferritic-martensitic steel after continuous cooling cycles at moderate rates Carrizo, Denise Alejandra; Besoky, Jorge Ignacio; Luppo, María Journal of Materials Research and Technology, Vol. 8, Issue 1 https://doi.org/10.1016/j.jmrt.2018.07.004	journal	January 2019
A novel design of transitional layer structure between reduced activation ferritic martensitic steels and tungsten for plasma facing materials Gräning, Tim; Tan, Lizhen; Robin, Ishtiaque Journal of Materials Research and Technology, Vol. 24 https://doi.org/10.1016/j.jmrt.2023.04.019	journal	May 2023
Ferritic/martensitic steels for next-generation reactors Klueh, R. L.; Nelson, A. T. Journal of Nuclear Materials, Vol. 371, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2007.05.005	journal	September 2007
Status and key issues of reduced activation ferritic/martensitic steels as the structural material for a DEMO blanket Tanigawa, H.; Shiba, K.; Möslang, A. Journal of Nuclear Materials, Vol. 417, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2011.05.023	journal	October 2011
Recent status and improvement of reduced-activation ferritic-martensitic steels for high-temperature service Tan, L.; Katoh, Y.; Tavassoli, A. -A. F. Journal of Nuclear Materials, Vol. 479 https://doi.org/10.1016/j.jnucmat.2016.07.054	journal	October 2016
Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels Song, Miao; Wang, Mi; Lou, Xiaoyuan Journal of Nuclear Materials, Vol. 513 https://doi.org/10.1016/j.jnucmat.2018.10.044	journal	January 2019
Performance of a ferritic/martensitic steel for nuclear reactor applications fabricated using additive manufacturing Sridharan, Niyanth; Gussev, Maxim N.; Field, Kevin G. Journal of Nuclear Materials, Vol. 521 https://doi.org/10.1016/j.jnucmat.2019.04.020	journal	August 2019
Advanced synchrotron characterization techniques for fusion materials science Sprouster, D. J.; Trelewicz, J. R.; Snead, L. L. Journal of Nuclear Materials, Vol. 543 https://doi.org/10.1016/j.jnucmat.2020.152574	journal	January 2021
Tensile properties and microstructure of additively manufactured Grade 91 steel for nuclear applications Eftink, Benjamin P.; Vega, Daniel A.; El Atwani, Osman Journal of Nuclear Materials, Vol. 544 https://doi.org/10.1016/j.jnucmat.2020.152723	journal	February 2021
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review Kok, Y.; Tan, X. P.; Wang, P. Materials & Design, Vol. 139 https://doi.org/10.1016/j.matdes.2017.11.021	journal	February 2018
Physically based modeling, characterization and design of an induction hardening process for a new slurry pipeline steel Javaheri, Vahid; Pohjonen, Aarne; Asperheim, John Inge Materials & Design, Vol. 182 https://doi.org/10.1016/j.matdes.2019.108047	journal	November 2019
Additive Manufacturing Techniques in Manufacturing -An Overview Prakash, K. Satish; Nancharaih, T.; Rao, V. V. Subba Materials Today: Proceedings, Vol. 5, Issue 2 https://doi.org/10.1016/j.matpr.2017.11.642	journal	January 2018
Comparison of powder bed fusion and directed energy deposition for tailoring mechanical properties of traditionally brittle alloys Babuska, Tomas F.; Krick, Brandon A.; Susan, Donald F. Manufacturing Letters, Vol. 28 https://doi.org/10.1016/j.mfglet.2021.02.003	journal	April 2021
In-situ synchrotron X-ray study of microstructural evolution during creep deformation in Grade 91 steel Laliberte, Fallon; Li, Meimei; Almer, Jonathan Materials Science and Engineering: A, Vol. 737 https://doi.org/10.1016/j.msea.2018.09.033	journal	November 2018
Anisotropic mechanical properties and deformation behavior of low-carbon high-strength steel component fabricated by wire and arc additive manufacturing Sun, Laibo; Jiang, Fengchun; Huang, Ruisheng Materials Science and Engineering: A, Vol. 787 https://doi.org/10.1016/j.msea.2020.139514	journal	June 2020
Dislocation densities in a low-carbon steel during martensite transformation determined by in situ high energy X-Ray diffraction Macchi, Juan; Gaudez, Steve; Geandier, Guillaume Materials Science and Engineering: A, Vol. 800 https://doi.org/10.1016/j.msea.2020.140249	journal	January 2021
Additive manufacturing of structural materials Liu, Guo; Zhang, Xiaofeng; Chen, Xuliang Materials Science and Engineering: R: Reports, Vol. 145 https://doi.org/10.1016/j.mser.2020.100596	journal	July 2021
Creep Properties of Grade 91 Steel Steam Generator Tube at 923K Palaparti, D. P. Rao; Samuel, E. Isaac; Choudhary, B. K. Procedia Engineering, Vol. 55 https://doi.org/10.1016/j.proeng.2013.03.221	journal	January 2013
OriginPro 9.1: Scientific Data Analysis and Graphing Software—Software Review Seifert, E. Journal of Chemical Information and Modeling, Vol. 54, Issue 5 https://doi.org/10.1021/ci500161d	journal	April 2014
NIH Image to ImageJ: 25 years of image analysis Schneider, Caroline A.; Rasband, Wayne S.; Eliceiri, Kevin W. Nature Methods, Vol. 9, Issue 7 https://doi.org/10.1038/nmeth.2089	journal	June 2012
Three-dimensional printing of multicomponent glasses using phase-separating resins Moore, David G.; Barbera, Lorenzo; Masania, Kunal Nature Materials, Vol. 19, Issue 2 https://doi.org/10.1038/s41563-019-0525-y	journal	November 2019
Two-dimensional time-resolved x-ray diffraction study of dual phase rapid solidification in steels Yonemura, Mitsuharu; Osuki, Takahiro; Terasaki, Hidenori Journal of Applied Physics, Vol. 107, Issue 1 https://doi.org/10.1063/1.3277037	journal	January 2010
Additive manufacturing technologies: state of the art and trends Gardan, Julien International Journal of Production Research, Vol. 54, Issue 10 https://doi.org/10.1080/00207543.2015.1115909	journal	November 2015
Steel grades 91 and 92 microstructure and precipitate evolution atlas and life assessment tool Tonti, A.; Alvino, A.; Antonini, A. Materials at High Temperatures https://doi.org/10.1080/09603409.2023.2264061	journal	October 2023
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys Gorsse, Stéphane; Hutchinson, Christopher; Gouné, Mohamed Science and Technology of Advanced Materials, Vol. 18, Issue 1 https://doi.org/10.1080/14686996.2017.1361305	journal	January 2017
A Road Map for the Advanced Manufacturing of Ferritic-Martensitic Steels Sridharan, Niyanth; Field, Kevin Fusion Science and Technology, Vol. 75, Issue 4 https://doi.org/10.1080/15361055.2019.1577124	journal	May 2019
Additive Manufacturing of Optically Transparent Glass Klein, John; Stern, Michael; Franchin, Giorgia 3D Printing and Additive Manufacturing, Vol. 2, Issue 3 https://doi.org/10.1089/3dp.2015.0021	journal	September 2015
Simultaneous structure and size–strain refinement by the Rietveld method Lutterotti, L.; Scardi, P. Journal of Applied Crystallography, Vol. 23, Issue 4 https://doi.org/10.1107/S0021889890002382	journal	August 1990
Origami and 4D printing of elastomer-derived ceramic structures Liu, Guo; Zhao, Yan; Wu, Ge Science Advances, Vol. 4, Issue 8 https://doi.org/10.1126/sciadv.aat0641	journal	August 2018
Microstructural Control of Additively Manufactured Metallic Materials Collins, P. C.; Brice, D. A.; Samimi, P. Annual Review of Materials Research, Vol. 46, Issue 1 https://doi.org/10.1146/annurev-matsci-070115-031816	journal	July 2016
Effect of Cubic and Hexagonal Boron Nitride Additions on the Synthesis of Ag–SnO₂ Electrical Contact Material Biyik, Serkan Journal of Nanoelectronics and Optoelectronics, Vol. 14, Issue 7 https://doi.org/10.1166/jno.2019.2592	journal	July 2019
Effect of Reinforcement Ratio on Physical and Mechanical Properties of Cu-W Composites Synthesized by Ball Milling Biyik, Serkan Materials Focus, Vol. 7, Issue 4 https://doi.org/10.1166/mat.2018.1513	journal	August 2018
Welding and weldability of candidate ferritic alloys for future advanced ultrasupercritical fossil power plants David, S. A.; Siefert, J. A.; Feng, Z. Science and Technology of Welding and Joining, Vol. 18, Issue 8 https://doi.org/10.1179/1362171813Y.0000000152	journal	November 2013
Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors Klueh, R. L. International Materials Reviews, Vol. 50, Issue 5 https://doi.org/10.1179/174328005X41140	journal	October 2005
Welding residual stresses in ferritic power plant steels Francis, J. A.; Bhadeshia, H. K. D. H.; Withers, P. J. Materials Science and Technology, Vol. 23, Issue 9 https://doi.org/10.1179/174328407X213116	journal	September 2007
Wire + Arc Additive Manufacturing Williams, S. W.; Martina, F.; Addison, A. C. Materials Science and Technology, Vol. 32, Issue 7 https://doi.org/10.1179/1743284715Y.0000000073	journal	May 2015
Behaviour of Z phase in 9–12%Cr steels Danielsen, H. K.; Hald, J. Energy Materials, Vol. 1, Issue 1 https://doi.org/10.1179/174892306X99732	journal	March 2006
The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder Biyik, S.; Aydin, M. Acta Physica Polonica A, Vol. 127, Issue 4 https://doi.org/10.12693/APhysPolA.127.1255	journal	April 2015
Investigation of the Effect of Different Current Loads on the Arc-Erosion Performance of Electrical Contacts Biyik, S.; Aydin, M. Acta Physica Polonica A, Vol. 129, Issue 4 https://doi.org/10.12693/APhysPolA.129.656	journal	April 2016
Fabrication and Arc-Erosion Behavior of Ag8SnO₂ Electrical Contact Materials under Inductive Loads Biyik, S.; Aydin, M. Acta Physica Polonica A, Vol. 131, Issue 3 https://doi.org/10.12693/APhysPolA.131.339	journal	March 2017
Characterization of Nanocrystalline Cu25Mo Electrical Contact Material Synthesized via Ball Milling Biyik, S. Acta Physica Polonica A, Vol. 132, Issue 3-II https://doi.org/10.12693/APhysPolA.132.886	journal	September 2017
Optimization of Mechanical Alloying Parameters of Cu25W Electrical Contact Material Biyik, S.; Aydin, M. Acta Physica Polonica A, Vol. 132, Issue 3-II https://doi.org/10.12693/APhysPolA.132.909	journal	September 2017
Effect of Polyethylene Glycol on the Mechanical Alloying Behavior of Cu-W Electrical Contact Material Biyik, S. Acta Physica Polonica A, Vol. 134, Issue 1 https://doi.org/10.12693/APhysPolA.134.208	journal	July 2018
Influence of Type of Process Control Agent on the Synthesis of Ag8ZnO Composite Powder Biyik, S. Acta Physica Polonica A, Vol. 135, Issue 4 https://doi.org/10.12693/APhysPolA.135.778	journal	April 2019
Comparison of the Dislocation Density in Martensitic Steels Evaluated by Some X-ray Diffraction Methods Takebayashi, Shigeto; Kunieda, Tomonori; Yoshinaga, Naoki ISIJ International, Vol. 50, Issue 6 https://doi.org/10.2355/isijinternational.50.875	journal	January 2010
T test as a parametric statistic Kim, Tae Kyun Korean Journal of Anesthesiology, Vol. 68, Issue 6 https://doi.org/10.4097/kjae.2015.68.6.540	journal	January 2015

Similar Records

Wire-arc additive manufacturing and post-heat treatment optimization on microstructure and mechanical properties of Grade 91 steel

Journal Article · Thu Dec 31 23:00:00 EST 2020 · Additive Manufacturing · OSTI ID:1786479

Microstructure and Creep Performance of Wire Arc Additive Manufactured Grade 91 Steel

Conference · Mon Jul 01 00:00:00 EDT 2024 · OSTI ID:2438934

Synchrotron based investigation of anisotropy and microstructure of wire arc additive manufactured Grade 91 steel

Citation Formats

References (67)

Similar Records

Related Subjects