Scaling of thermal stratification in outlet plena of SFRs with gallium as a surrogate fluid
- Department of Mechanical and Nuclear Engineering, Kansas State University, Manhattan, KS 66506 (United States)
- Argonne National Laboratory, Argonne, IL (United States)
- Department of Nuclear, Plasma and Radiological Engineering, University of Illinois, Urbana, IL 61801 (United States)
Due to its high thermal diffusivity, liquid sodium can develop thermally stratified regions in the hot and cold pools of SFRs under certain off normal operating conditions. The temperature gradients in the fluid give rise to mixed convection flow in which flow velocities result both from pressure gradients and from volume forces induced by density gradients. High thermal diffusivity and low momentum diffusivity leads to reduced thermal mixing and enhanced stratification. Thermal stratification, if not looked carefully in the design, can lead to severe consequences in normal operation with forced coolant circulation and during off-normal natural circulation. The resulting hydraulic and thermal loads can cause the failure modes in structures and components critical for reactor safety. Thermal stratification in the SFR pools can lead to thermal fatigue, which can lead to structural and material failure, or pose serious concerns for the reactor safety. In addition to thermo-structural issues, the reactivity changes are significantly impacted due to density or temperature driven movement of liquid sodium. Temperature changes or gradients in the Upper Instrumentation Structures (UIS) of SFRs can lead to thermal contraction, a case that can lead to positive reactivity insertion after core shut-down. The motivation of this work is to design a scaled down experimental facility which can generate high fidelity data for thermal stratification physics to validate 3-dimensional (3D) Computational Fluid Dynamics (CFD) models. These validated CFD codes can be used to improve the 1-dimensional (1D) system level codes such as SAS4A/SASSYS-1 which are currently not capable of simulating thermal stratification accurately. These improvements in 1D system level SAS4A/SASSYS-1 codes can significantly improve the safety analyses and design of SFRs. The GaTE facility outlet plenum model is designed based on physics based similarities. Thermal stratification physics is governed primarily by the Richardson numbers (Ri). The expected low flow rates during off-normal conditions can lead to a high degree of thermal stratification in the outlet plenum with a corresponding Ri = 530. Therefore, the inlet flow velocities and inlet hydraulic diameter for the gallium coolant entering the test vessel are required to achieve same Ri. The design of test vessel in GaTE facility is finalized to a 1/20. scale outlet plenum height of the ABTR. This design of the test facility will allow the decoupling of the thermal stratification physics at low flow rates with the transient natural circulation. In other words, it will enable effective control to study thermal stratification at very low flow rates. Numerical studies are conducted with a 3D CFD code to examine the thermal behavior of the selected test design. Simulation results show that thermal gradients are present only in the vertical or axial direction which are similar to the behavior reported in previous studies on full scale SFR models. Future work will involve the experimental studies using the GaTE facility with the high fidelity instrumentation.
- OSTI ID:
- 23050425
- Journal Information:
- Transactions of the American Nuclear Society, Vol. 116; Conference: 2017 Annual Meeting of the American Nuclear Society, San Francisco, CA (United States), 11-15 Jun 2017; Other Information: Country of input: France; 11 refs.; available from American Nuclear Society - ANS, 555 North Kensington Avenue, La Grange Park, IL 60526 (US); ISSN 0003-018X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Thermal Stratification Modeling for Sodium-Cooled Fast Reactors: A Status Update
SAS4A/SASSYS-1 Commercial Grade Dedication Example Report for a Generic Sodium Pool-Type Fast Reactor Application
Related Subjects
42 ENGINEERING
COMPUTERIZED SIMULATION
COOLANTS
DENSITY
FLOW RATE
HYDRAULICS
LIQUIDS
NATURAL CONVECTION
NUMERICAL ANALYSIS
ONE-DIMENSIONAL CALCULATIONS
PRESSURE GRADIENTS
REACTIVITY INSERTIONS
REACTOR DESIGN
REACTOR SAFETY
SAFETY ANALYSIS
SODIUM
STRATIFICATION
TEMPERATURE GRADIENTS
TEST FACILITIES
THERMAL DIFFUSIVITY
THERMAL FATIGUE