Assessment of a Smoothed Particle Hydrodynamics Method for Thin Film on Textured Surfaces
- Department of Nuclear Engineering, North Carolina State University (United States)
A large number of previous studies suggest that the behavior of the near-wall liquid micro-layer plays a key role in boiling heat transfer and boiling crisis; see examples. The thin liquid layer interacts with heater surface and 'external' two-phase flow. The net effects of these interactions define the micro-hydrodynamics that leads to dryout. As a result, a good understanding of the thin-layer hydrodynamics is significant for the accurate prediction of CHF. Recently, with the advent of nanotechnology including micro-scale manufacturing, it becomes possible to perform high heat-flux boiling experiments with controlled surface conditions. Although many reports show rich observations about the effects of surface characteristics on CHF, physical mechanisms remain not fully understood. In order to have better understanding of the above phenomena, several computational models are developed, ranging from the lubrication theory to CFD methods. The former models are limited to one-dimensional formulation and unable to deal with the dry-out phenomena. It turns out that CFD methods have a greater potential for the mechanistic study of boiling. Towards the study objective, a particle-based CFD method called Smoothed Particle Hydrodynamics (SPH) is adopted. SPH is a Lagrangian particle method for solving systems of partial differential equations. Originally SPH is proposed for fluid dynamics in the context of astrophysical problems. Because mass and density are introduced during the particle approximation, SPH is also applied in fluid dynamic problems, where mass and density are important parameters to determine, without mass loss (a limitation of interface capturing schemes in mesh-based methods). Besides, geometrically complex and/or dynamic boundaries and interfaces can be handled without undue difficulty in SPH. Currently, most SPH simulations focus on large-scale scenarios (meter scale), like flooding and solitary wave. Also some works have been done with SPH in pore-scale. As for micro- or nano-scale simulation, people usually apply Dissipative Particle Dynamics (DPD) and Molecular Dynamics (MD) for particle-based simulation. Almost no work has been done on micro-scale with SPH, so assessments are needed to investigate the capability of SPH in application of micro-hydrodynamics. The Phenomena Identification and Ranking Table (PIRT) is applied to align application's technical requirements with associated physics and materials, models, simulation code capabilities and verification, validation and uncertainty quantification activities. The figures of merit are determined as: (1) Timing of micro-layer rewetting dry surface; (2) Effects of surface features. The corresponding key phenomena are determined as: (1) Hydrodynamics; (2) Interface Dynamics; (3) Energy; (4) Surface Effect. This study deals with isothermal scenario and no energy term is considered. Based on the current needs, a new SPH package, Micro-SPH, is compiled based on SPHysics with surface tension and wettability built in. Test cases are performed with Micro-SPH to assess the capability of SPH to each phenomenon identified. NEUTRINO with incompressible SPH solver is employed to investigate micro-fluid dynamics on a surface with uniformly distributed cylindrical pillars for application purposes. (authors)
- OSTI ID:
- 23042872
- Journal Information:
- Transactions of the American Nuclear Society, Vol. 115; Conference: 2016 ANS Winter Meeting and Nuclear Technology Expo, Las Vegas, NV (United States), 6-10 Nov 2016; Other Information: Country of input: France; 16 refs.; available from American Nuclear Society - ANS, 555 North Kensington Avenue, La Grange Park, IL 60526 (US); ISSN 0003-018X
- Country of Publication:
- United States
- Language:
- English
Similar Records
A high-fidelity approach towards simulation of pool boiling
Development and Validation of a Conjugate Heat Transfer Model for the Two-Phase CFD Code NEK-2P
Related Subjects
97 MATHEMATICAL METHODS AND COMPUTING
ASTROPHYSICS
BOILING
COMPUTERIZED SIMULATION
CYLINDRICAL CONFIGURATION
DENSITY
HEAT TRANSFER
HYDRODYNAMICS
LAGRANGIAN FUNCTION
LIQUIDS
LUBRICATION
MASS TRANSFER
MOLECULAR DYNAMICS METHOD
NANOTECHNOLOGY
NEUTRINOS
ONE-DIMENSIONAL CALCULATIONS
PARTIAL DIFFERENTIAL EQUATIONS
SURFACE TENSION
THIN FILMS
TWO-PHASE FLOW
VERIFICATION