Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Isothermal aging of three polyurethane elastomers

Technical Report ·
DOI:https://doi.org/10.2172/230372· OSTI ID:230372

Two polyurethane systems, EN-7 and L-100, have a long history as encapsulants and coatings in Sandia programs. These materials contain significant amounts of toluene diisocyanate (TDI), a suspect human carcinogen. As part of efforts to reduce the use of hazardous materials in the workplace, PET-90A, a polyurethane with less than 0.1% free TDI, was identified as a candidate for new applications and as a replacement for the more hazardous polyurethanes in selected programs. This report documents the results of a two-year accelerated aging study of PET-90A, EN-7, and L-100 polyurethane elastomers to characterize the effect of 135{degrees}F isothermal aging on selected physical, electrical, mechanical and thermal properties. In general, there was very little change in properties over the two year period for the three elastomers. The largest changes occurred in EN-7, which is the polyurethane with the longest service history in Sandia applications.

Research Organization:
Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
AC04-94AL85000
OSTI ID:
230372
Report Number(s):
SAND--96-1028; ON: DE96010885
Country of Publication:
United States
Language:
English