Nanoscale Mechanical Behavior of Nuclear Materials
- Los Alamos National Laboratory, P.O. Box 1667, Los Alamos, NM, 87545 (United States)
- University of Nevada, Reno, Reno, NV, 89557 (United States)
One of the primary performance objectives targeted for improved performance of nuclear fuels is fracture toughness. New materials or composite fuel architectures that offer greater resistance to cracking under the extreme environments encountered during nuclear reactor service would provide significant improvements to steady state (e.g. heat transfer, fuel redistribution) and transient (e.g. radionuclide release at elevated temperatures) conditions. Options currently under investigation include 'nontraditional' nuclear fuels designated around high uranium density. These include uranium silicides, uranium borides, and composite fuel materials constructed of these and uranium nitride or uranium dioxide. The increase uranium density compared with uranium dioxide (UO{sub 2}) has made them interesting to a new generation of nuclear fuels research driven by the renewed push for accident-tolerant light water reactor (LWR) fuels. Measurement of the thermophysical and thermodynamic properties of these constituent materials has progressed in recent years, but evaluation of mechanical properties at relevant temperatures is necessary to support further evaluations. While thermophysical properties such as thermal conductivity, heat capacity, and thermal expansion are generally the primary properties of interest, mechanical properties will play an important role in governing the deformation and fracture of the fuel during both normal operation and potential transients. It is therefore necessary to develop techniques capable of measuring these properties to predict the response of a candidate fuel form to anticipated thermal gradients. Nanoindentation techniques provide a demonstrated alternative to traditional mechanical test methods. Much work has also been carried out over the past few years to obtain stress-strain curves using a spherical nanoindentation approach. The techniques are expected to be useful for measurement of the mechanical properties of local structure of various materials. Nanomechanical test techniques have particular value in the area of nuclear materials, where numerous factors motivate limiting the sample volume to the extent possible. However, few attempts at application of nanoindentation to evaluate the mechanical properties of the nuclear fuels and cladding materials are reported in the literature. The effect of a limited set of variables (e.g. porosity, temperature dependence) on the mechanical properties of UO{sub 2} has been explored using early nanomechanical testing techniques. However, nanomechanical evaluation has not been extended to other nuclear fuels. In this work, we demonstrate the effectiveness of using instrumented spherical nanoindentation test techniques to capture the mechanical response of regions within individual grains in ion-irradiated W and Zr over a range of ion-irradiation conditions. As well as the nanomechanical response of U-Si and UO{sub 2} fuel materials Nanoindentation results obtained at room temperature will be used to express nano- and bulk- mechanical properties as a function of material stoichiometry. (authors)
- OSTI ID:
- 22992094
- Journal Information:
- Transactions of the American Nuclear Society, Vol. 114, Issue 1; Conference: Annual Meeting of the American Nuclear Society. Embedded topical meeting 'Nuclear fuels and structural material for the next generation nuclear reactors', New Orleans, LA (United States), 12-16 Jun 2016; Other Information: Country of input: France; 16 refs.; Available from American Nuclear Society - ANS, 555 North Kensington Avenue, La Grange Park, IL 60526 United States; ISSN 0003-018X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Thermal Transport and Fracture Behavior of Sintered Fuel Pellets: Experimental Validation of NEAMS Tool MARMOT
Experimentally validated multiphysics modeling of fracture induced by thermal shocks in sintered UO2 pellets
Related Subjects
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
42 ENGINEERING
FRACTURE PROPERTIES
HEAT TRANSFER
IRRADIATION
MECHANICAL TESTS
NANOSTRUCTURES
NUCLEAR FUELS
RADIOISOTOPES
SPECIFIC HEAT
SPHERICAL CONFIGURATION
TEMPERATURE DEPENDENCE
TEMPERATURE GRADIENTS
THERMAL CONDUCTIVITY
THERMAL EXPANSION
URANIUM BORIDES
URANIUM DIOXIDE
URANIUM NITRIDES
URANIUM SILICIDES
WATER COOLED REACTORS
WATER MODERATED REACTORS