Effect of Grain Refining on Properties of a Cast Superaustenitic Stainless Steel
Journal Article
·
· Journal of Materials Engineering and Performance
- Missouri University of Science and Technology, Materials Science and Engineering Department (United States)
The goal of this study was to evaluate the industrial performance of cast high-alloy superaustenitic 19Cr-17Ni-6Mo stainless steel by refining the as-cast structure. A grain-refined, as-cast structure was achieved by the in situ inoculation with titanium nitrides (TiN) co-precipitated on previously formed spinel (MgAl{sub 2}O{sub 4}) inclusions, thus promoting heterogeneous nucleation of austenite during solidification. A homogenization heat treatment of the casting did not provide significant changes of the as-cast grain macrostructure in either the base or grain-refined steels. However, it was found that a combination of inoculation with heat treatment is an effective way of reducing interdendritic segregation. The industrial performance which includes the mechanical properties, corrosion resistance, and machinability was evaluated in the heat-treated condition for both base and inoculated steels. Tensile testing revealed improvements in ultimate tensile strength, ductility, and yield strength of the inoculated steel. The room-temperature impact properties exhibited a slight decrease in average impact energy but showed reduced variability in the inoculated steel compared to the base steel. The machining results showed that the inoculated steel had a slight improvement in machinability. The inoculated steel exhibited a lower corrosion rate but showed an increase in mass loss due to pitting. The changes in steel performance were linked to microstructure and nonmetallic inclusion families obtained by automated ASPEX SEM/EDX analysis.
- OSTI ID:
- 22970914
- Journal Information:
- Journal of Materials Engineering and Performance, Journal Name: Journal of Materials Engineering and Performance Journal Issue: 3 Vol. 28; ISSN 1059-9495; ISSN JMEPEG
- Country of Publication:
- United States
- Language:
- English
Similar Records
Precipitation behavior of the sigma phase with Ni and Mn content variations in superaustenitic stainless steel weld metal
Phase Transformation in Cast Superaustenitic Stainless Steels
Performance of high molybdenum superaustenitic stainless steel welds in harsh chloride environments
Journal Article
·
Mon Oct 15 00:00:00 EDT 2018
· Materials Characterization
·
OSTI ID:22805782
Phase Transformation in Cast Superaustenitic Stainless Steels
Thesis/Dissertation
·
Sat Dec 31 23:00:00 EST 2005
·
OSTI ID:897374
Performance of high molybdenum superaustenitic stainless steel welds in harsh chloride environments
Book
·
Thu Oct 31 23:00:00 EST 1996
·
OSTI ID:382592