Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 1. Formulation of the Problem
Journal Article
·
· Russian Engineering Research
- Bauman Moscow State Technical University (Russian Federation)
Abstract—The plastic deformation of large disks and hard-to-deform disks on low-power equipment is considered. In comparison with upsetting and flattening by forging, sectional bulk stamping is promising. It permits successive plastic deformation of individual sections of the blank.
- OSTI ID:
- 22944958
- Journal Information:
- Russian Engineering Research, Vol. 39, Issue 6; Other Information: Copyright (c) 2019 Allerton Press, Inc.; Country of input: International Atomic Energy Agency (IAEA); ISSN 1068-798X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 4. Deformation of a Protrusion by an Annular Punch
Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 5. Comparison of Theoretical and Experimental Results
Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 3. Final Stage of Central-Punch Introduction
Journal Article
·
Sun Sep 15 00:00:00 EDT 2019
· Russian Engineering Research
·
OSTI ID:22944958
Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 5. Comparison of Theoretical and Experimental Results
Journal Article
·
Tue Oct 15 00:00:00 EDT 2019
· Russian Engineering Research
·
OSTI ID:22944958
Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 3. Final Stage of Central-Punch Introduction
Journal Article
·
Thu Aug 15 00:00:00 EDT 2019
· Russian Engineering Research
·
OSTI ID:22944958