Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Additively Manufactured AISI H13 Tool Steel
Journal Article
·
· Journal of Materials Engineering and Performance
- Soochow University, Laser Processing Research Center, School of Mechanical and Electric Engineering (China)
- Anhui University of Technology, School of Material Science and Engineering (China)
- Kuka Industry Ltd. Co (China)
The effect of heat treatment on microstructure and mechanical properties (microhardness, wear resistance and impact toughness) of laser additively manufactured AISI H13 tool steel was systemically investigated. To understand the variation of microstructure and mechanical properties under different heat treatments, the as-deposited samples were treated at 350, 450, 550, 600 and 650 °C/2 h, respectively. Microstructure and phase transformation were investigated through optical microscopy, scanning electron microscope and transmission electron microscope. The mechanical properties were characterized by nanoindentation tests, Charpy tests and high-temperature wear tests. The microstructure of as-deposited samples consisted of martensite, ultrafine carbides and retained austenite. After the tempering treatment, the martensite was converted into tempered martensite and some fine alloy carbides which precipitated in the matrix. When treated at 550 °C, the greatest hardness and nanohardness were 600 HV{sub 0.3} and 6119.4 MPa due to many needle-like carbides precipitation. The value of hardness increased firstly and then decreased when increasing the temperature. When tempered temperatures exceeded 550 °C, the carbides became coarse, and martensitic matrix recrystallized at the temperature of 650 °C. The least impact energy was 6.0 J at a temperature of 550 °C. Samples tempered at 550 °C had larger wear volume loss than that of others. Wear resistances of all samples under atmospheric condition at 400 °C showed an oxidation mechanism.
- OSTI ID:
- 22860783
- Journal Information:
- Journal of Materials Engineering and Performance, Journal Name: Journal of Materials Engineering and Performance Journal Issue: 11 Vol. 26; ISSN 1059-9495; ISSN JMEPEG
- Country of Publication:
- United States
- Language:
- English
Similar Records
High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting
Investment cast AISI H13 tooling for automotive applications
The effect of microstructure on the thermal fatigue resistance of investment cast and wrought AISI H13 hot work die steel
Journal Article
·
Thu Feb 14 23:00:00 EST 2019
· Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science
·
OSTI ID:22933605
Investment cast AISI H13 tooling for automotive applications
Conference
·
Sat Jul 01 00:00:00 EDT 1995
·
OSTI ID:91941
The effect of microstructure on the thermal fatigue resistance of investment cast and wrought AISI H13 hot work die steel
Conference
·
Sat Jul 01 00:00:00 EDT 1995
·
OSTI ID:97153