Rheological Evolution of Ti-Bearing Slag with Different Volume Fractions of TiN
- Northeastern University, School of Metallurgy (China)
The effect of the volume fraction of TiN (0 to 4.27 vol pct) on the rheological behaviors of Ti-bearing slag, including the viscosity and the constitutive equation, was investigated using a Brookfield rheometer at 1773 K. With the increasing TiN, the viscosity and the shear stress increased substantially, and the slag is converted from Newtonian to non-Newtonian. When the slag samples were dispersed with TiN (1.00 to 4.27 vol pct), the measured viscosities were greater than those estimated by the Einstein–Roscoe equation, and the complex internal structure was suggested to be responsible for the extra enhancement of the viscosity beyond that caused by TiN itself. The viscosity curves of the slag samples containing TiN (1.00 to 4.27 vol pct) were divided into three regions depending on the critical shear rate and the initial shear rate. In the Newtonian region, the apparent volume fraction of TiN was defined and used to develop a semiempirical model based on the Einstein–Roscoe equation to describe the viscosity. In the two non-Newtonian regions, the shear rate, the yield stress, and the viscosity differences between the non-Newtonians regions and the Newtonian regions were applied in developing the viscosity models.
- OSTI ID:
- 22857894
- Journal Information:
- Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, Vol. 49, Issue 4; Other Information: Copyright (c) 2018 The Minerals, Metals & Materials Society and ASM International; http://www.springer-ny.com; Country of input: International Atomic Energy Agency (IAEA); ISSN 1073-5615
- Country of Publication:
- United States
- Language:
- English
Similar Records
Rheological Transitions of the Solid-Bearing Slag During Cooling Process
Experimental observations of the effects of shear rates and particle concentration on the viscosity of Fe2O3-deionized water nanofluids