Effect of in-situ (TiC-TiB2) reinforcement on aging and mechanical behavior of AZ91 magnesium matrix composite
Highlights: • Effect of TiC-TiB{sub 2} particles on precipitation behavior of in-situ composite was studied. • The age-hardening rate of in-situ composites is faster than that of alloy. • Faster age hardening rate is due to the presence of high dislocation density in composite. • Post aging treatment improved the mechanical properties of both base and composite. - Abstract: In the present work, influence of in-situ TiC-TiB{sub 2} reinforcement on age hardening behavior and mechanical properties of TiC-TiB{sub 2}/AZ91 composite was investigated. The base and in-situ composite materials were solution treated at 400 °C for 24 h and then aged at different temperatures up to 100 h. The kinetics of age hardening results revealed that the addition of in-situ TiC-TiB{sub 2} reinforcement increase the age hardening kinetics of the composite as compared to AZ91 magnesium alloy. The improvement in age hardening kinetics is attributed to the presence of high dislocation density resulted from the mismatch of coefficients of thermal expansion between in-situ TiC-TiB{sub 2} reinforcement and magnesium matrix. The precipitation behavior of Mg{sub 17}Al{sub 12} phase in both AZ91 alloy and TiC-TiB{sub 2}/AZ91 composites were established. After age hardening, base and in-situ composite materials show significant improvement in ultimate tensile strength by 47.72% and 66.49% respectively as compared with the base monolithic alloy. The enhancement of mechanical properties in the base and in-situ composites is explained in detail by analyzing their fractographs and microstructures.
- OSTI ID:
- 22804978
- Journal Information:
- Materials Characterization, Vol. 139; Other Information: Copyright (c) 2017 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.; Country of input: International Atomic Energy Agency (IAEA); ISSN 1044-5803
- Country of Publication:
- United States
- Language:
- English
Similar Records
Comparative investigation on microstructures and mechanical properties of (TiB + TiC)/Ti-6Al-4V composites from Ti-B4C-C and Ti-TiB2-TiC systems
Effect of Y, Sr, and Nd additions on the microstructure and microfracture mechanism of squeeze-cast AZ91-X magnesium alloys