Influence of Cobalt and Molybdenum Additives on the Structure and Shape Memory Parameters of Reaction-Sintered Porous Nickel Titanium Alloys
- Tomsk State University (Russian Federation)
We have studied the structure and properties of porous nickel titanium (TiNi) alloys obtained upon reaction sintering of Ti and Ni powders with Co and Mo additives. It is established that Co and Mo doping additives retain the compaction of Ni powder achieved at the initial stage of sintering. The maximum deformation of porous samples loaded in the austenite state was observed upon adding Co, while the addition of Mo resulted in minimum deformation. The addition of Co leads to single-stage martensitic transformation in TiNi phase, while the addition of Mo leads to the two-stage transformation that is more homogeneous over the volume. Both Co and Mo additives lead to increase in the maximum accumulated strain due to the formation of favorably oriented stress-induced martensite and reoriented quench-induced martensite.
- OSTI ID:
- 22786350
- Journal Information:
- Technical Physics Letters, Vol. 44, Issue 7; Other Information: Copyright (c) 2018 Pleiades Publishing, Ltd.; Country of input: International Atomic Energy Agency (IAEA); ISSN 1063-7850
- Country of Publication:
- United States
- Language:
- English
Similar Records
Influence of Detwinning on the Shape Memory Effect in Ni{sub 55}Fe{sub 18}Ga{sub 27} Single Crystals
Martensitic transformation behaviors of rapidly solidified Ti–Ni–Mo powders