Multiple pollutant removal using the condensing heat exchanger. Task 3, Long term testing at the ECTC
The objective of this task is to demonstrate long term operation of a condensing heat exchanger for coal-fired conditions. A small condensing heat exchanger will be installed at the Environmental Control Technology Center in Barker, New York. It will be installed downstream of the flue gas particulate removal system. The test will determine the amount of wear, if any, on the Teflon{trademark} covered internals of the heat exchanger. Visual inspection and measurements will be obtained for the Teflon{trademark} covered tubes during the test. The material wear study will conducted over a one year calendar period, and the CHX equipment will be operated to the fullest extent allowable.
- Research Organization:
- Babcock and Wilcox Co., Alliance, OH (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC22-95PC95255
- OSTI ID:
- 227693
- Report Number(s):
- DOE/PC/95255--T3; ON: DE96010230
- Country of Publication:
- United States
- Language:
- English
Similar Records
Multiple pollutant removal using the condensing heat exchanger: Phase 1 final report, November 1995--June 1997. Addendum 2: Task 3 topical report -- Long term wear test
Multiple pollutant removal using the condensing heat exchanger: Phase 1 final report, October 1995--July 1997
Multiple pollutant removal using the condensing heat exchanger
Technical Report
·
Mon Jun 01 00:00:00 EDT 1998
·
OSTI ID:677070
Multiple pollutant removal using the condensing heat exchanger: Phase 1 final report, October 1995--July 1997
Technical Report
·
Mon Jun 01 00:00:00 EDT 1998
·
OSTI ID:677068
Multiple pollutant removal using the condensing heat exchanger
Technical Report
·
Mon Jun 01 00:00:00 EDT 1998
·
OSTI ID:7506