TU-FG-BRB-08: Challenges, Limitations and Future Outlook Towards Clinical Translation of Proton Acoustic Range Verification
- Stanford University, Palo Alto, CA (United States)
- University of Oklahoma, Norman, OK (United States)
- University of Oklahoma Health Sciences Center, Oklahoma City, OK (United States)
- Rutgers Cancer Institute of New Jersey, Rutgers The State University of New, New Brunswick, New Jersey (United States)
- Rutgers University, New Brunswick, NJ (United States)
- Faculty of Engineering, Hokkaido University, Sapporo, Hokkaido (Japan)
- Department of Radiation Oncology, Graduate School of Medicine, Sapporo, Hokkaido (Japan)
- Stanford University School of Medicine, Stanford, CA (United States)
Purpose: To report our investigations of proton acoustic imaging, including computer simulations and preliminary experimental studies at clinical facilities. The ultimate achievable accuracy, sensitivity and clinical translation challenges are discussed. Methods: The acoustic pulse due to pressure rise was estimated using finite element model. Since the ionoacoustic pulse is highly dependent on the proton pulse width and energy, multiple pulse widths were studied. Based on the received signal spectrum at piezoelectric ultrasound transducer with consideration of random thermal noise, maximum spatial resolution of the proton-acoustic imaging modality was calculated. The simulation studies defined the design specifications of the system to detect proton acoustic signal from Hitachi and Mevion clinical machines. A 500 KHz hydrophone with 100 dB amplification was set up in a water tank placed in front of the proton nozzle A 40 MHz data acquisition was synchronized by a trigger signal provided by the machine. Results: Given 30–800 mGy dose per pulse at the Bragg peak, the minimum number of protons detectable by the proton acoustic technique was on the order of 10×10^6 per pulse. The broader pulse widths produce signal with lower acoustic frequencies, with 10 µs pulses producing signals with frequency less than 100 kHz. As the proton beam pulse width increases, a higher dose rate is required to measure the acoustic signal. Conclusion: We have established the minimal detection limit for protonacoustic range validation for a variety of pulse parameters. Our study indicated practical proton-acoustic range verification can be feasible with a pulse shorter than 10 µs, 5×10^6 protons/pulse, 50 nA beam current and a highly sensitive ultrasonic transducer. The translational challenges into current clinical machines include proper magnetic shielding of the measurement equipment, providing a clean trigger signal from the proton machine, providing a shorter proton beam pulse and higher dose per pulse.
- OSTI ID:
- 22654001
- Journal Information:
- Medical Physics, Vol. 43, Issue 6; Other Information: (c) 2016 American Association of Physicists in Medicine; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-2405
- Country of Publication:
- United States
- Language:
- English
Similar Records
TU-FG-BRB-09: Thermoacoustic Range Verification with Perfect Co-Registered Overlay of Bragg Peak onto Ultrasound Image
Ionoacoustic characterization of the proton Bragg peak with submillimeter accuracy
Related Subjects
60 APPLIED LIFE SCIENCES
ACOUSTICS
BIOMEDICAL RADIOGRAPHY
COMPUTERIZED SIMULATION
DATA ACQUISITION
DOSE RATES
FINITE ELEMENT METHOD
KHZ RANGE 01-100
KHZ RANGE 100-1000
MHZ RANGE 01-100
PROTON BEAMS
PULSES
SENSITIVITY
SIGNALS
SPATIAL RESOLUTION
ULTRASONIC WAVES
VERIFICATION