Optimization of TiO{sub 2} photoelectrode with titanium isopropoxide for flexible dye sensitized solar cells
- Research Center for Electronics and Telecommunications Indonesian Institute of Sciences (PPET-LIPI), Kampus LIPI, Jl. Sangkuriang, Bandung 40135 (Indonesia)
Flexible DSSC uses plastic substrate such as polyethylene terephthalate (PET) to deposit photoelectrode, resulting in poor photoconversion efficiency of the solar cell due to the low temperature applied in the fabrication process. In this research, optimization process was examined in order to optimize the performance of flexible DSSC by adding titanium isopropoxide (TTIP) as a binder to TiO{sub 2} paste for DSSC photoelectrode. Small portion of TTIP with molar percentages of 0%, 5%, and 10% were added to a mixture of TiO{sub 2} nanocrystaline, butanol, DI water, and reflector powder. The mixtures were stirred using a magnetic stirrer for 24 hours. Each of various pastes was then deposited on a plastic substrate with doctor blade method on 1 cm{sup 2} area. The films were sintered at temperature of 150 °C for 4 hours and soaked in dye solution for 24 hours. Furthermore, TiO{sub 2} photoelectrode and Pt counter electrode were assembled and injected by electrolyte. Flexible DSSCs were characterized by SEM and XRD to determine their morphological structures. J-V measurement was performed by sun simulator to calculate DSSC photoconversion efficiency. The optimum performance of flexible DSSC was achieved by DSSC with 10 mol% TTIP content.
- OSTI ID:
- 22606696
- Journal Information:
- AIP Conference Proceedings, Vol. 1729, Issue 1; Conference: ISCPMS 2015: 1. international symposium on current progress in mathematics and sciences, Depok (Indonesia), 3-4 Nov 2015; Other Information: (c) 2016 Author(s); Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Microscopy of hierarchically organized TiO{sub 2} photoelectrode for dye solar cells
Waterless TiO{sub 2} atomic layer deposition using titanium tetrachloride and titanium tetraisopropoxide
Related Subjects
SUPERCONDUCTIVITY AND SUPERFLUIDITY
BUTANOLS
DYES
EFFICIENCY
ELECTRODES
ELECTROLYTES
FABRICATION
FILMS
OPTIMIZATION
POLYESTERS
POLYETHYLENES
POSITRON COMPUTED TOMOGRAPHY
POWDERS
SCANNING ELECTRON MICROSCOPY
SIMULATORS
SOLAR CELLS
SUBSTRATES
SUN
TITANIUM OXIDES
X-RAY DIFFRACTION