RF cavity design and qualification for proton accelerator
- Ion Accelerator Development Division, Bhabha Atomic Research Centre, Mumbai (India)
Alvarez type Drift Tube Linac (DTL) is used for acceleration of proton beam in low energy section of beta ranging from 0.04 to 0.40. DTL is cylindrical RF cavity resonating in TM010 mode at 352.21 MHz frequency. It consists of array of drift tubes arranged ensuring that DTL centre and Drift Tube centre are concentric. The Drift Tubes also houses Permanent Magnet Quadrupole for transverse focusing of proton beam. A twelve cell prototype of DTL section is designed, developed and fabricated at Bhabha Atomic Research Centre, Trombay. Complete DTL accelerator consists of eight such DTL sections. High frequency microwave simulations are carried out in SOPRANO, vector fields and COMSOL simulation software. This prototype DTL is 1640.56 mm long cavity with 520 mm ID, 600 mm OD and consists of eleven Drift Tubes, two RF end flanges, three slug tuners, six post couplers, three RF field monitors, one RF waveguide coupler, two DN100 vacuum flanges and DTL tank platform with alignment features. Girder based Drift tube mounting arrangement utilizing uncompressing energy of disc springs for optimum combo RF-vacuum seal compression is worked out and implemented. This paper discusses design of this RF vacuum cavity operating at high accelerating field gradient in ultra-high vacuum. Detailed vacuum design and results of RF and vacuum qualifications are discussed. Results on mechanical accuracy achieved on scaled pre-prototype are also presented. Paper summarizes the engineering developments carried out for this RF cavity and brings out the future activities proposed in indigenous development of high gradient RF cavities for ion accelerators. (author)
- Research Organization:
- Bhabha Atomic Research Centre, Mumbai (India); Indian Vacuum Society, Mumbai (India)
- OSTI ID:
- 22597191
- Country of Publication:
- United States
- Language:
- English
Similar Records
Coupled-cavity drift-tube linac
RF AND THERMO-MECHANICAL CONSIDERATIONS IN DESIGNING THE WAVEGUIDE IRIS COUPLER FOR THE DRIFT TUBE LINAC IN THE ORNL SPALLATION NEUTRON SOURCE