In-Containment Signal Acquisition and Data Transmission via Power Lines within High Dose Areas of Nuclear Power Plants
- Institute for Electronics Engineering, University of Erlangen-Nuremberg (Germany)
- AREVA GmbH, Paul-Gossen-Str. 100, 91052 Erlangen (Germany)
Signal acquisition and data transmission for innovative sensor systems and networks inside the containment of nuclear power plants (NPPs) is still a challenge with respect to safety, performance, reliability, availability, and costs. This especially applies to equipment upgrades for existing plants, special measurements, but also for new builds. This paper presents a novel method for efficient and cost-effective sensor signal acquisition and data transmission via power lines, in order to cope with the disadvantages of common system architectures that often suffer from poor signal integrity due to raw data transmissions via long cables, huge efforts and costs for installation, and low flexibility with respect to maintenance and upgrades. A transmitter-receiver architecture is proposed that allows multiplexing of multiple sensor inputs for unidirectional point-to-point transmission by superimposing information signals on existing AC or DC supply lines, but also on active and inactive sensor wires, or spare cables, using power line communication (PLC) technology. Based on commercial off-the-shelf (COTS) electronic parts, a radiation hard transmitter hardware is designed to operate in harsh environment within the containment during full plant operation. The system's modular approach allows application specific trade-offs between redundancy and throughput regarding data transmission, as well as various sensor input front-ends which are compatible with state of the art systems. PLC technology eliminates the need for costly installation of additional cables and wall penetrations, while providing a complementary and diverse communication technology for upgrades of existing systems. At the receiver side in low dose areas, signals are extracted from the power line, demodulated, and de-multiplexed, in order to regain the original sensor signal information and provide it either in analog or digital output format. Successful laboratory qualification tests, field trails, and a demonstrator setup installation within a NPP verify the overall performance of the proposed system. (authors)
- Research Organization:
- Institute of Electrical and Electronics Engineers - IEEE, 3 Park Avenue, 17th Floor, New York, N.Y. 10016-5997 (United States)
- OSTI ID:
- 22531189
- Report Number(s):
- ANIMMA-2015-IO-128; TRN: US16V0380102130
- Resource Relation:
- Conference: ANIMMA 2015: 4. International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications, Lisboa (Portugal), 20-24 Apr 2015; Other Information: Country of input: France
- Country of Publication:
- United States
- Language:
- English
Similar Records
Distributed Antenna System for Wireless Data Communication in Nuclear Power Plants
The trend of digital control system design for nuclear power plants in Korea
Related Subjects
22 GENERAL STUDIES OF NUCLEAR REACTORS
ALTERNATING CURRENT
AVAILABILITY
DATA TRANSMISSION
DESIGN
DIRECT CURRENT
ELECTRIC CABLES
FLEXIBILITY
INSTALLATION
MAINTENANCE
MONITORING
NUCLEAR POWER PLANTS
OPERATION
PERFORMANCE TESTING
REDUNDANCY
RELIABILITY
REMOTE MULTIPLEXING SYSTEMS
SAFETY
SENSORS
SIGNALS