Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Barium depletion in hollow cathode emitters

Journal Article · · Journal of Applied Physics
DOI:https://doi.org/10.1063/1.4938489· OSTI ID:22494883
;  [1];  [2]
  1. Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California 91109 (United States)
  2. Graduate Aerospace Laboratories, California Institute of Technology, Pasadena, California 91125 (United States)
Dispenser hollow cathodes rely on a consumable supply of Ba released by BaO-CaO-Al{sub 2}O{sub 3} source material in the pores of a tungsten matrix to maintain a low work function surface. The examination of cathode emitters from long duration tests shows deposits of tungsten at the downstream end that appear to block the flow of Ba from the interior. In addition, a numerical model of Ba transport in the cathode plasma indicates that the Ba partial pressure in the insert may exceed the equilibrium vapor pressure of the dominant Ba-producing reaction, and it was postulated previously that this would suppress Ba loss in the upstream part of the emitter. New measurements of the Ba depletion depth from a cathode insert operated for 8200 h reveal that Ba loss is confined to a narrow region near the downstream end, confirming this hypothesis. The Ba transport model was modified to predict the depletion depth with time. A comparison of the calculated and measured depletion depths gives excellent qualitative agreement, and quantitative agreement was obtained assuming an insert temperature 70 °C lower than measured beginning-of-life values.
OSTI ID:
22494883
Journal Information:
Journal of Applied Physics, Journal Name: Journal of Applied Physics Journal Issue: 2 Vol. 119; ISSN JAPIAU; ISSN 0021-8979
Country of Publication:
United States
Language:
English

Similar Records

The effect of cathode geometry on barium transport in hollow cathode plasmas
Journal Article · Wed May 14 00:00:00 EDT 2014 · Journal of Applied Physics · OSTI ID:22275560

Chemical stability of barium calcium aluminate dispenser-cathode impregnants
Technical Report · Sun Aug 01 00:00:00 EDT 1982 · OSTI ID:5081549

Plasma processes inside dispenser hollow cathodes
Journal Article · Thu Jun 15 00:00:00 EDT 2006 · Physics of Plasmas · OSTI ID:20787398